Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 05:34:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi

273 lines
6.7 KiB
Text
Raw Normal View History

arm: dts: k3-j7200: Add dts support Add the basic a72 dts for j7200. Following nodes were supported: - UART - MMC SD - I2C - TISCI communication Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-05 17:14:28 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
*
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_mcu_wakeup {
dmsc: dmsc@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
mboxes= <&secure_proxy_main 11>,
<&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44083000 0x0 0x1000>;
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
};
k3_clks: clocks {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
k3_reset: reset-controller {
compatible = "ti,sci-reset";
#reset-cells = <2>;
};
};
chipid: chipid@43000014 {
compatible = "ti,am654-chipid";
reg = <0x0 0x43000014 0x0 0x4>;
};
wkup_pmx0: pinmux@4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c000 0x00 0x178>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
};
mcu_ram: sram@41c00000 {
compatible = "mmio-sram";
reg = <0x00 0x41c00000 0x00 0x100000>;
ranges = <0x0 0x00 0x41c00000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
};
wkup_uart0: serial@42300000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 287 2>;
clock-names = "fclk";
};
wkup_i2c0: i2c@42120000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x42120000 0x0 0x100>;
interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 197 1>;
power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
};
mcu_uart0: serial@40a00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 2>;
clock-names = "fclk";
};
ARM: dts: k3-j7200: Add HyperBus and HyperFlash nodes J7200 SoM has Cypress HyperFlash connected to HyperBus interface, add DT entries for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-06 18:56:59 +00:00
fss: system-controller@47000000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x47000000 0x0 0x100>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
hbmc_mux: hbmc-mux {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x4 0x2>; /* HBMC select */
};
hbmc: hyperbus@47034000 {
compatible = "ti,am654-hbmc";
reg = <0x0 0x47034000 0x0 0x100>,
<0x5 0x00000000 0x1 0x0000000>;
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <2>;
#size-cells = <1>;
mux-controls = <&hbmc_mux 0>;
clocks = <&k3_clks 102 5>;
assigned-clocks = <&k3_clks 102 5>;
assigned-clock-rates = <333333333>;
};
};
arm: dts: k3-j7200: Add dts support Add the basic a72 dts for j7200. Following nodes were supported: - UART - MMC SD - I2C - TISCI communication Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-05 17:14:28 +00:00
mcu_i2c0: i2c@40b00000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b00000 0x0 0x100>;
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 194 1>;
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
};
mcu_i2c1: i2c@40b10000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b10000 0x0 0x100>;
interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 195 1>;
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
};
ARM: dts: k3-j7200: Add wkup gpio node Add wkup_gpio0 node required for detecting whether board mux is set HyperFlash. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-06 18:56:58 +00:00
ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support Add MCU NAVSS, UDMA and CPSW2G DT nodes. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-06 18:57:00 +00:00
cbass_mcu_navss: mcu-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <232>;
mcu_ringacc: ringacc@2b800000 {
compatible = "ti,am654-navss-ringacc";
reg = <0x0 0x2b800000 0x0 0x400000>,
<0x0 0x2b000000 0x0 0x400000>,
<0x0 0x28590000 0x0 0x100>,
<0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
ti,sci-dev-id = <235>;
};
mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
<0x0 0x2aa00000 0x0 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
#dma-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <236>;
ti,ringacc = <&mcu_ringacc>;
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
<0x0f>; /* TX_HCHAN */
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
<0x0b>; /* RX_HCHAN */
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
};
};
ARM: dts: k3-j7200: Add wkup gpio node Add wkup_gpio0 node required for detecting whether board mux is set HyperFlash. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-06 18:56:58 +00:00
wkup_gpio0: gpio@42110000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x42110000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 113 0>;
clock-names = "gpio";
};
ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support Add MCU NAVSS, UDMA and CPSW2G DT nodes. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-06 18:57:00 +00:00
mcu_conf: scm_conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40f00000 0x20000>;
phy_gmii_sel: phy@4040 {
compatible = "ti,am654-cpsw-phy-sel";
reg = <0x4040 0x4>;
reg-names = "gmii-sel";
#phy-cells = <1>;
};
};
mcu_cpsw: ethernet@46000000 {
compatible = "ti,j721e-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x46000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges;
dma-coherent;
clocks = <&k3_clks 18 21>;
clock-names = "fck";
power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
dmas = <&mcu_udmap 0xf000>,
<&mcu_udmap 0xf001>,
<&mcu_udmap 0xf002>,
<&mcu_udmap 0xf003>,
<&mcu_udmap 0xf004>,
<&mcu_udmap 0xf005>,
<&mcu_udmap 0xf006>,
<&mcu_udmap 0xf007>,
<&mcu_udmap 0x7000>;
dma-names = "tx0", "tx1", "tx2", "tx3",
"tx4", "tx5", "tx6", "tx7",
"rx";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
ti,label = "port1";
ti,syscon-efuse = <&mcu_conf 0x200>;
phys = <&phy_gmii_sel 1>;
};
};
davinci_mdio: mdio@f00 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x0 0xf00 0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&k3_clks 18 21>;
clock-names = "fck";
bus_freq = <1000000>;
};
cpts {
clocks = <&k3_clks 18 2>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
};
};
arm: dts: k3-j7200: Add dts support Add the basic a72 dts for j7200. Following nodes were supported: - UART - MMC SD - I2C - TISCI communication Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-05 17:14:28 +00:00
};
Reference in a new issue Copy permalink