mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
174 lines
5.8 KiB
C
174 lines
5.8 KiB
C
|
/*
|
||
|
* Driver for Blackfin on-chip ATAPI controller.
|
||
|
*
|
||
|
* Enter bugs at http://blackfin.uclinux.org/
|
||
|
*
|
||
|
* Copyright (c) 2008 Analog Devices Inc.
|
||
|
*
|
||
|
* Licensed under the GPL-2 or later.
|
||
|
*/
|
||
|
|
||
|
#ifndef PATA_BFIN_H
|
||
|
#define PATA_BFIN_H
|
||
|
|
||
|
#include <asm/blackfin_local.h>
|
||
|
|
||
|
struct ata_ioports {
|
||
|
unsigned long cmd_addr;
|
||
|
unsigned long data_addr;
|
||
|
unsigned long error_addr;
|
||
|
unsigned long feature_addr;
|
||
|
unsigned long nsect_addr;
|
||
|
unsigned long lbal_addr;
|
||
|
unsigned long lbam_addr;
|
||
|
unsigned long lbah_addr;
|
||
|
unsigned long device_addr;
|
||
|
unsigned long status_addr;
|
||
|
unsigned long command_addr;
|
||
|
unsigned long altstatus_addr;
|
||
|
unsigned long ctl_addr;
|
||
|
unsigned long bmdma_addr;
|
||
|
unsigned long scr_addr;
|
||
|
};
|
||
|
|
||
|
struct ata_port {
|
||
|
unsigned int port_no; /* primary=0, secondary=1 */
|
||
|
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */
|
||
|
unsigned long flag;
|
||
|
unsigned int ata_mode;
|
||
|
unsigned char ctl_reg;
|
||
|
unsigned char last_ctl;
|
||
|
unsigned char dev_mask;
|
||
|
};
|
||
|
|
||
|
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
|
||
|
|
||
|
#define DRV_NAME "pata-bfin"
|
||
|
#define DRV_VERSION "0.9"
|
||
|
#define __iomem
|
||
|
|
||
|
#define ATA_REG_CTRL 0x0E
|
||
|
#define ATA_REG_ALTSTATUS ATA_REG_CTRL
|
||
|
#define ATA_TMOUT_BOOT 30000
|
||
|
#define ATA_TMOUT_BOOT_QUICK 7000
|
||
|
|
||
|
#define PATA_BFIN_WAIT_TIMEOUT 10000
|
||
|
#define PATA_DEV_NUM_PER_PORT 2
|
||
|
|
||
|
/* These are the offset of the controller's registers */
|
||
|
#define ATAPI_OFFSET_CONTROL 0x00
|
||
|
#define ATAPI_OFFSET_STATUS 0x04
|
||
|
#define ATAPI_OFFSET_DEV_ADDR 0x08
|
||
|
#define ATAPI_OFFSET_DEV_TXBUF 0x0c
|
||
|
#define ATAPI_OFFSET_DEV_RXBUF 0x10
|
||
|
#define ATAPI_OFFSET_INT_MASK 0x14
|
||
|
#define ATAPI_OFFSET_INT_STATUS 0x18
|
||
|
#define ATAPI_OFFSET_XFER_LEN 0x1c
|
||
|
#define ATAPI_OFFSET_LINE_STATUS 0x20
|
||
|
#define ATAPI_OFFSET_SM_STATE 0x24
|
||
|
#define ATAPI_OFFSET_TERMINATE 0x28
|
||
|
#define ATAPI_OFFSET_PIO_TFRCNT 0x2c
|
||
|
#define ATAPI_OFFSET_DMA_TFRCNT 0x30
|
||
|
#define ATAPI_OFFSET_UMAIN_TFRCNT 0x34
|
||
|
#define ATAPI_OFFSET_UDMAOUT_TFRCNT 0x38
|
||
|
#define ATAPI_OFFSET_REG_TIM_0 0x40
|
||
|
#define ATAPI_OFFSET_PIO_TIM_0 0x44
|
||
|
#define ATAPI_OFFSET_PIO_TIM_1 0x48
|
||
|
#define ATAPI_OFFSET_MULTI_TIM_0 0x50
|
||
|
#define ATAPI_OFFSET_MULTI_TIM_1 0x54
|
||
|
#define ATAPI_OFFSET_MULTI_TIM_2 0x58
|
||
|
#define ATAPI_OFFSET_ULTRA_TIM_0 0x60
|
||
|
#define ATAPI_OFFSET_ULTRA_TIM_1 0x64
|
||
|
#define ATAPI_OFFSET_ULTRA_TIM_2 0x68
|
||
|
#define ATAPI_OFFSET_ULTRA_TIM_3 0x6c
|
||
|
|
||
|
|
||
|
#define ATAPI_GET_CONTROL(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_CONTROL)
|
||
|
#define ATAPI_SET_CONTROL(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_CONTROL, val)
|
||
|
#define ATAPI_GET_STATUS(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_STATUS)
|
||
|
#define ATAPI_GET_DEV_ADDR(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_DEV_ADDR)
|
||
|
#define ATAPI_SET_DEV_ADDR(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_DEV_ADDR, val)
|
||
|
#define ATAPI_GET_DEV_TXBUF(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_DEV_TXBUF)
|
||
|
#define ATAPI_SET_DEV_TXBUF(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_DEV_TXBUF, val)
|
||
|
#define ATAPI_GET_DEV_RXBUF(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_DEV_RXBUF)
|
||
|
#define ATAPI_SET_DEV_RXBUF(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_DEV_RXBUF, val)
|
||
|
#define ATAPI_GET_INT_MASK(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_INT_MASK)
|
||
|
#define ATAPI_SET_INT_MASK(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_INT_MASK, val)
|
||
|
#define ATAPI_GET_INT_STATUS(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_INT_STATUS)
|
||
|
#define ATAPI_SET_INT_STATUS(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_INT_STATUS, val)
|
||
|
#define ATAPI_GET_XFER_LEN(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_XFER_LEN)
|
||
|
#define ATAPI_SET_XFER_LEN(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_XFER_LEN, val)
|
||
|
#define ATAPI_GET_LINE_STATUS(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_LINE_STATUS)
|
||
|
#define ATAPI_GET_SM_STATE(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_SM_STATE)
|
||
|
#define ATAPI_GET_TERMINATE(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_TERMINATE)
|
||
|
#define ATAPI_SET_TERMINATE(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_TERMINATE, val)
|
||
|
#define ATAPI_GET_PIO_TFRCNT(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_PIO_TFRCNT)
|
||
|
#define ATAPI_GET_DMA_TFRCNT(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_DMA_TFRCNT)
|
||
|
#define ATAPI_GET_UMAIN_TFRCNT(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_UMAIN_TFRCNT)
|
||
|
#define ATAPI_GET_UDMAOUT_TFRCNT(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_UDMAOUT_TFRCNT)
|
||
|
#define ATAPI_GET_REG_TIM_0(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_REG_TIM_0)
|
||
|
#define ATAPI_SET_REG_TIM_0(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_REG_TIM_0, val)
|
||
|
#define ATAPI_GET_PIO_TIM_0(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_PIO_TIM_0)
|
||
|
#define ATAPI_SET_PIO_TIM_0(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_PIO_TIM_0, val)
|
||
|
#define ATAPI_GET_PIO_TIM_1(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_PIO_TIM_1)
|
||
|
#define ATAPI_SET_PIO_TIM_1(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_PIO_TIM_1, val)
|
||
|
#define ATAPI_GET_MULTI_TIM_0(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_0)
|
||
|
#define ATAPI_SET_MULTI_TIM_0(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_0, val)
|
||
|
#define ATAPI_GET_MULTI_TIM_1(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_1)
|
||
|
#define ATAPI_SET_MULTI_TIM_1(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_1, val)
|
||
|
#define ATAPI_GET_MULTI_TIM_2(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_2)
|
||
|
#define ATAPI_SET_MULTI_TIM_2(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_2, val)
|
||
|
#define ATAPI_GET_ULTRA_TIM_0(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_0)
|
||
|
#define ATAPI_SET_ULTRA_TIM_0(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_0, val)
|
||
|
#define ATAPI_GET_ULTRA_TIM_1(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_1)
|
||
|
#define ATAPI_SET_ULTRA_TIM_1(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_1, val)
|
||
|
#define ATAPI_GET_ULTRA_TIM_2(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_2)
|
||
|
#define ATAPI_SET_ULTRA_TIM_2(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_2, val)
|
||
|
#define ATAPI_GET_ULTRA_TIM_3(base)\
|
||
|
bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_3)
|
||
|
#define ATAPI_SET_ULTRA_TIM_3(base, val)\
|
||
|
bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_3, val)
|
||
|
|
||
|
#endif
|