Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/rpi_4_32b_defconfig

69 lines
1.7 KiB
Text
Raw Normal View History

RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_ARM=y
CONFIG_ARCH_BCM283X=y
CONFIG_SYS_TEXT_BASE=0x00008000
CONFIG_SYS_MALLOC_F_LEN=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_TARGET_RPI_4_32B=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x4000
arm: rpi: Sync rpi dts files from Linux Sync these files, obtained from Linux v5.15. This adds a devicetree file for rpi_4 which was not there before. Testing shows no change so far as I can see: - boots to U-Boot prompt on rpi0, rpi2 - boots to distro on rpi3 - boots to distro on rpi4 I am assuming that syncing with Linux is safe, but the maintainer should know for sure. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:13 +00:00
CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23 15:47:37 +00:00
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 14:25:31 +00:00
CONFIG_SYS_LOAD_ADDR=0x1000000
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_OF_BOARD_SETUP=y
config: Enable support for the XHCI controller on RPI4 board This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-06-03 12:43:45 +00:00
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="pci enum; usb start;"
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_MISC_INIT_R=y
Convert CONFIG_LCD_DT_SIMPLEFB to Kconfig This converts the following to Kconfig: CONFIG_LCD_DT_SIMPLEFB This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-15 15:32:17 +00:00
CONFIG_FDT_SIMPLEFB=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_SYS_PROMPT="U-Boot> "
config: enable DFU over USB on Raspberry Pi4 boards Enable support for DFU over USB. This requires to enable USB gadget, DWC2 UDC OTG driver and DFU command. DFU entities are defined for the following firmware objects: u-boot.bin, uboot.env, config.txt, and zImage/Image. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-02 11:11:18 +00:00
CONFIG_CMD_DFU=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
config: Enable support for the XHCI controller on RPI4 board This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-06-03 12:43:45 +00:00
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_CMD_FS_UUID=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
net: convert TFTP_TSIZE to proper Kconfig option TFTP transfer size can be used to re-size the TFTP progress bar on single line based on the server reported file size. The support for this has been around from 2019, but it was never converted to proper Kconfig. While adding this new Kconfig, enable it by default for OMAP2+ and K3 devices also. Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-05-12 08:03:04 +00:00
CONFIG_TFTP_TSIZE=y
configs: rpi4: Enable DM_DMA across all RPi4 configurations The DM_DMA option is needed in order to translate physical address into bus addresses on a per-device basis. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-01-12 12:55:30 +00:00
CONFIG_DM_DMA=y
config: enable DFU over USB on Raspberry Pi4 boards Enable support for DFU over USB. This requires to enable USB gadget, DWC2 UDC OTG driver and DFU command. DFU entities are defined for the following firmware objects: u-boot.bin, uboot.env, config.txt, and zImage/Image. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-02 11:11:18 +00:00
CONFIG_DFU_MMC=y
usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-01 11:21:47 +00:00
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x200000
Convert CONFIG_BCM2835_GPIO to Kconfig This converts the following to Kconfig: CONFIG_BCM2835_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-22 01:33:30 +00:00
CONFIG_BCM2835_GPIO=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_MMC_SDHCI=y
configs: rpi_4 : enable SDHCI_SDMA config Enable SDHCI_SDMA configuration. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-03-27 04:08:02 +00:00
CONFIG_MMC_SDHCI_SDMA=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_MMC_SDHCI_BCM2835=y
rpi4: Enable GENET Ethernet controller The Raspberry Pi 4 SoC features an integrated Gigabit Ethernet controller, connected as a platform device. Enable the new driver in the three applicable defconfigs, to allow TFTP booting on the board. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> [Andre: Add joined and 32-bit configs] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-01-27 01:14:44 +00:00
CONFIG_DM_ETH=y
CONFIG_BCMGENET=y
config: Enable support for the XHCI controller on RPI4 board This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-06-03 12:43:45 +00:00
CONFIG_PCI=y
CONFIG_PCI_BRCMSTB=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_GENERIC is not set
configs: Enable support for reset controllers on RPi4 This is required in order to access the reset controller used to initialize the board's xHCI chip. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-06-29 16:37:24 +00:00
CONFIG_DM_RESET=y
configs: rpi4_32: Enable iProc RNG200 Enable the RNG driver for RPi4 with 32 bit. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-26 10:48:01 +00:00
CONFIG_DM_RNG=y
CONFIG_RNG_IPROC200=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
configs: rpi: Enable SMBIOS sysinfo driver Enable this driver to allow U-Boot to get SMBIOS table information from a device tree node. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Fabian Vogt <fvogt@suse.com>
2021-04-12 13:38:52 +00:00
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SMBIOS=y
config: enable DFU over USB on Raspberry Pi4 boards Enable support for DFU over USB. This requires to enable USB gadget, DWC2 UDC OTG driver and DFU command. DFU entities are defined for the following firmware objects: u-boot.bin, uboot.env, config.txt, and zImage/Image. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-02 11:11:18 +00:00
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
config: Enable support for the XHCI controller on RPI4 board This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-06-03 12:43:45 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
config: Enable USB Keyboard suuport on RPi4 32 bit Supporting USB keyboards out of the box is both handy for development and production. Notably if u-boot is used to boot into GRUB. This patch adds USB keyboard support for 32 bit RPi4 config. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-07-12 17:40:28 +00:00
CONFIG_USB_KEYBOARD=y
config: enable DFU over USB on Raspberry Pi4 boards Enable support for DFU over USB. This requires to enable USB gadget, DWC2 UDC OTG driver and DFU command. DFU entities are defined for the following firmware objects: u-boot.bin, uboot.env, config.txt, and zImage/Image. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-02 11:11:18 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_DM_VIDEO=y
video: enable VIDEO_ANSI and all VIDEO_BBP options This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-02-04 21:43:06 +00:00
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_SYS_WHITE_ON_BLACK=y
video: Convert CONFIG_VIDEO_BCM2835 to Kconfig This converts the following to Kconfig: CONFIG_VIDEO_BCM2835 This is the final ad-hoc CONFIG_VIDEO_... to convert. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-01-23 14:04:14 +00:00
CONFIG_VIDEO_BCM2835=y
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_CONSOLE_SCROLL_LINES=10
CONFIG_PHYS_TO_BUS=y
config: Enable support for the XHCI controller on RPI4 board This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-06-03 12:43:45 +00:00
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=2
RPI: Add defconfigs for rpi4 (32/64) This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-07-24 14:39:04 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink