u-boot/arch/riscv/dts/hifive-unmatched-a00.dts

247 lines
4.8 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/* Copyright (c) 2020 SiFive, Inc */
#include "fu740-c000.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
#define RTCCLK_FREQ 1000000
/ {
model = "SiFive HiFive Unmatched A00";
compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
"sifive,fu740";
chosen {
stdout-path = "serial0";
};
cpus {
timebase-frequency = <RTCCLK_FREQ>;
};
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x4 0x00000000>;
};
hfclk: hfclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <26000000>;
clock-output-names = "hfclk";
};
rtcclk: rtcclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <RTCCLK_FREQ>;
clock-output-names = "rtcclk";
};
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
status = "okay";
temperature-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
vcc-supply = <&vdd_bpro>;
interrupt-parent = <&gpio>;
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
};
eeprom@54 {
compatible = "microchip,24c02", "atmel,24c02";
reg = <0x54>;
vcc-supply = <&vdd_bpro>;
label = "board-id";
pagesize = <16>;
read-only;
size = <256>;
};
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
interrupt-parent = <&gpio>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
onkey {
compatible = "dlg,da9063-onkey";
};
rtc {
compatible = "dlg,da9063-rtc";
};
wdt {
compatible = "dlg,da9063-watchdog";
};
regulators {
vdd_bcore: bcores-merged {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-min-microamp = <4800000>;
regulator-max-microamp = <4800000>;
regulator-always-on;
};
vdd_bpro: bpro {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <2400000>;
regulator-max-microamp = <2400000>;
regulator-always-on;
};
vdd_bperi: bperi {
regulator-min-microvolt = <1060000>;
regulator-max-microvolt = <1060000>;
regulator-min-microamp = <1500000>;
regulator-max-microamp = <1500000>;
regulator-always-on;
};
vdd_bmem_bio: bmem-bio-merged {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3000000>;
regulator-max-microamp = <3000000>;
regulator-always-on;
};
vdd_ldo1: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_ldo2: ldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_ldo3: ldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo4: ldo4 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_ldo5: ldo5 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo6: ldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_ldo7: ldo7 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo8: ldo8 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ld09: ldo9 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
};
vdd_ldo10: ldo10 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vdd_ldo11: ldo11 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
};
};
};
&qspi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&spi0 {
status = "okay";
mmc@0 {
compatible = "mmc-spi-slot";
reg = <0>;
spi-max-frequency = <20000000>;
voltage-ranges = <3300 3300>;
disable-wp;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
&eth0 {
status = "okay";
phy-mode = "gmii";
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&pwm0 {
status = "okay";
};
&pwm1 {
status = "okay";
};
&gpio {
status = "okay";
gpio-line-names = "J29.1", "PMICNTB", "PMICSHDN", "J8.1", "J8.3",
"PCIe_PWREN", "THERM", "UBRDG_RSTN", "PCIe_PERSTN",
"ULPI_RSTN", "J8.2", "UHUB_RSTN", "GEMGXL_RST", "J8.4",
"EN_VDD_SD", "SD_CD";
};