u-boot/board/renesas/ulcb/ulcb.c

258 lines
6.3 KiB
C
Raw Normal View History

/*
* board/renesas/ulcb/ulcb.c
* This file is ULCB board support.
*
* Copyright (C) 2017 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <netdev.h>
#include <dm.h>
#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/rmobile.h>
#include <asm/arch/rcar-mstp.h>
#include <asm/arch/sh_sdhi.h>
#include <i2c.h>
#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
#define CPGWPCR 0xE6150904
#define CPGWPR 0xE615090C
#define CLK2MHZ(clk) (clk / 1000 / 1000)
void s_init(void)
{
struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
writel(0xA5A50000, CPGWPCR);
writel(0xFFFFFFFF, CPGWPR);
}
#define GSX_MSTP112 BIT(12) /* 3DG */
#define TMU0_MSTP125 BIT(25) /* secure */
#define TMU1_MSTP124 BIT(24) /* non-secure */
#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
#define ETHERAVB_MSTP812 BIT(12)
#define DVFS_MSTP926 BIT(26)
#define SD0_MSTP314 BIT(14)
#define SD1_MSTP313 BIT(13)
#define SD2_MSTP312 BIT(12) /* either MMC0 */
#define SD0CKCR 0xE6150074
#define SD1CKCR 0xE6150078
#define SD2CKCR 0xE6150268
#define SD3CKCR 0xE615026C
int board_early_init_f(void)
{
/* TMU0,1 */ /* which use ? */
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
/* SCIF2 */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310);
/* EHTERAVB */
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHERAVB_MSTP812);
/* eMMC */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD1_MSTP313 | SD2_MSTP312);
/* SDHI0 */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD0_MSTP314);
writel(0, SD0CKCR);
writel(0, SD1CKCR);
writel(0, SD2CKCR);
writel(0, SD3CKCR);
#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
/* DVFS for reset */
mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926);
#endif
return 0;
}
/* SYSC */
/* R/- 32 Power status register 2(3DG) */
#define SYSC_PWRSR2 0xE6180100
/* -/W 32 Power resume control register 2 (3DG) */
#define SYSC_PWRONCR2 0xE618010C
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
/* Init PFC controller */
#if defined(CONFIG_R8A7795)
r8a7795_pinmux_init();
#elif defined(CONFIG_R8A7796)
r8a7796_pinmux_init();
#endif
/* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
#ifdef CONFIG_RAVB
/* EtherAVB Enable */
/* GPSR2 */
gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL);
gpio_request(GPIO_GFN_AVB_AVTP_MATCH_A, NULL);
gpio_request(GPIO_GFN_AVB_LINK, NULL);
gpio_request(GPIO_GFN_AVB_PHY_INT, NULL);
gpio_request(GPIO_GFN_AVB_MAGIC, NULL);
gpio_request(GPIO_GFN_AVB_MDC, NULL);
/* IPSR0 */
gpio_request(GPIO_IFN_AVB_MDC, NULL);
gpio_request(GPIO_IFN_AVB_MAGIC, NULL);
gpio_request(GPIO_IFN_AVB_PHY_INT, NULL);
gpio_request(GPIO_IFN_AVB_LINK, NULL);
gpio_request(GPIO_IFN_AVB_AVTP_MATCH_A, NULL);
gpio_request(GPIO_IFN_AVB_AVTP_CAPTURE_A, NULL);
/* IPSR1 */
gpio_request(GPIO_FN_AVB_AVTP_PPS, NULL);
/* IPSR2 */
gpio_request(GPIO_FN_AVB_AVTP_MATCH_B, NULL);
/* IPSR3 */
gpio_request(GPIO_FN_AVB_AVTP_CAPTURE_B, NULL);
/* AVB_PHY_RST */
gpio_request(GPIO_GP_2_10, NULL);
gpio_direction_output(GPIO_GP_2_10, 0);
mdelay(20);
gpio_set_value(GPIO_GP_2_10, 1);
udelay(1);
#endif
return 0;
}
static struct eth_pdata salvator_x_ravb_platdata = {
.iobase = 0xE6800000,
.phy_interface = 0,
.max_speed = 1000,
};
U_BOOT_DEVICE(salvator_x_ravb) = {
.name = "ravb",
.platdata = &salvator_x_ravb_platdata,
};
#ifdef CONFIG_SH_SDHI
int board_mmc_init(bd_t *bis)
{
int ret = -ENODEV;
/* SDHI0 */
gpio_request(GPIO_GFN_SD0_DAT0, NULL);
gpio_request(GPIO_GFN_SD0_DAT1, NULL);
gpio_request(GPIO_GFN_SD0_DAT2, NULL);
gpio_request(GPIO_GFN_SD0_DAT3, NULL);
gpio_request(GPIO_GFN_SD0_CLK, NULL);
gpio_request(GPIO_GFN_SD0_CMD, NULL);
gpio_request(GPIO_GFN_SD0_CD, NULL);
gpio_request(GPIO_GFN_SD0_WP, NULL);
gpio_request(GPIO_GP_5_2, NULL);
gpio_request(GPIO_GP_5_1, NULL);
gpio_direction_output(GPIO_GP_5_2, 1); /* power on */
gpio_direction_output(GPIO_GP_5_1, 1); /* 1: 3.3V, 0: 1.8V */
ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
SH_SDHI_QUIRK_64BIT_BUF);
if (ret)
return ret;
/* SDHI1/SDHI2 eMMC */
gpio_request(GPIO_GFN_SD1_DAT0, NULL);
gpio_request(GPIO_GFN_SD1_DAT1, NULL);
gpio_request(GPIO_GFN_SD1_DAT2, NULL);
gpio_request(GPIO_GFN_SD1_DAT3, NULL);
gpio_request(GPIO_GFN_SD2_DAT0, NULL);
gpio_request(GPIO_GFN_SD2_DAT1, NULL);
gpio_request(GPIO_GFN_SD2_DAT2, NULL);
gpio_request(GPIO_GFN_SD2_DAT3, NULL);
gpio_request(GPIO_GFN_SD2_CLK, NULL);
#if defined(CONFIG_R8A7795)
gpio_request(GPIO_GFN_SD2_CMD, NULL);
#elif defined(CONFIG_R8A7796)
gpio_request(GPIO_FN_SD2_CMD, NULL);
#else
#error Only R8A7795 and R87796 is supported
#endif
gpio_request(GPIO_GP_5_3, NULL);
gpio_request(GPIO_GP_5_9, NULL);
gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */
gpio_direction_output(GPIO_GP_5_9, 0); /* 1: 3.3V, 0: 1.8V */
ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 1,
SH_SDHI_QUIRK_64BIT_BUF);
return ret;
}
#endif
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_1_SIZE;
#if (CONFIG_NR_DRAM_BANKS >= 2)
gd->ram_size += PHYS_SDRAM_2_SIZE;
#endif
#if (CONFIG_NR_DRAM_BANKS >= 3)
gd->ram_size += PHYS_SDRAM_3_SIZE;
#endif
#if (CONFIG_NR_DRAM_BANKS >= 4)
gd->ram_size += PHYS_SDRAM_4_SIZE;
#endif
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#if (CONFIG_NR_DRAM_BANKS >= 2)
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
#endif
#if (CONFIG_NR_DRAM_BANKS >= 3)
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
#endif
#if (CONFIG_NR_DRAM_BANKS >= 4)
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
#endif
return 0;
}
const struct rmobile_sysinfo sysinfo = {
CONFIG_RCAR_BOARD_STRING
};
static const struct sh_serial_platdata serial_platdata = {
.base = SCIF2_BASE,
.type = PORT_SCIF,
.clk = CONFIG_SH_SCIF_CLK_FREQ,
.clk_mode = INT_CLK,
};
U_BOOT_DEVICE(salvator_x_scif2) = {
.name = "serial_sh",
.platdata = &serial_platdata,
};