Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 02:33:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/am65x_evm_a53_defconfig

174 lines
4.5 KiB
Text
Raw Normal View History

configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_ARM=y
CONFIG_ARCH_K3=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
configs: am65x_evm_a53: Increase malloc pool before relocation The malloc pool used before relocation is getting tight leading to out of memory errors doing certain DM-related calls. Since we are running the A53 SPL out of DDR let's just go ahead and bump its size as used in U-Boot proper as well as SPL (via Kconfig default value) from 8KB to 32KB. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:21 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x8000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=2
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SOC_K3_AM6=y
CONFIG_TARGET_AM654_A53_EVM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x680000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
spi: Enable missing CONFIG_SPL_DM_SPI support Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-16 23:06:29 +00:00
CONFIG_SPL_DM_SPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06 17:54:25 +00:00
CONFIG_SPL_TEXT_BASE=0x80080000
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28 18:28:38 +00:00
CONFIG_ENV_OFFSET_REDUND=0x6A0000
spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:03 +00:00
CONFIG_SPL_FS_FAT=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SPL_LIBDISK_SUPPORT=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
configs: am65x_evm_a53: Disable PSCI_RESET AM65x uses TISCI protocol to reset the device and does not support PSCI reset. So disable PSCI reset. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-25 09:08:05 +00:00
# CONFIG_PSCI_RESET is not set
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty At present we use the empty string to indicate that there is no FIT generator, but this doesn't allow an individual board to undefine it. Create a separate bool instead. Update the config of the boards which currently have an empty string. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-19 19:56:10 +00:00
# CONFIG_USE_SPL_FIT_GENERATOR is not set
configs: am65x_evm_a53: Enable CONFIG_OF_BOARD_SETUP Enable CONFIG_OF_BOARD_SETUP so that msmc sram dt nodes are updated correctly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-03-08 06:17:36 +00:00
CONFIG_OF_BOARD_SETUP=y
configs: am65x_evm_a53: Enhance bootcmd to start remoteprocs The A53 U-boot can support early booting of the MCU R5F remote processor(s) from U-boot prompt to achieve various system usecases before booting the Linux kernel. Update the default BOOTCOMMAND to provide an automatic and easier way to start the MCU R5F cores through added environment variables. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-04 10:31:48 +00:00
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
configs: am65/j72x: Set CONFIG_LOGLEVEL to 7 By default CONFIG_LOGLEVEL seems to be set to 4 which is too low and doesn't show dev_info/dev_notice/dev_warn messages on console. This has been deliberately set low globally to be conservative setting across the board due to primary bootloader size limitations. It is best to tune per board config as per user needs. On K3 we have separate SPL and u-boot configs so we can afford to set u-boot CONFIG_LOGLEVEL to 7. On AM65 this patch causes u-boot.img size to change from 932KB to 940KB with 1 line additional print during MMC boot. i.e. details of Net subsystem "Net: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000" Similar 8KB difference was seen on J721E. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com>
2020-10-30 13:00:24 +00:00
CONFIG_LOGLEVEL=7
configs: am65x_evm: Enable USB keyboard as second stdin Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:36 +00:00
CONFIG_CONSOLE_MUX=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
configs: am65x_evm: Add Support for eMMC boot Add configs to support RAW boot mode in eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-04 22:55:53 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_SPL_DMA=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_ENV_SUPPORT=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_SPL_MTD_SUPPORT=y
spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04 15:11:53 +00:00
CONFIG_SPL_DM_SPI_FLASH=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_DOMAIN=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_RAM_SUPPORT=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
# CONFIG_SPL_SPI_FLASH_TINY is not set
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_STORAGE=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_DFU=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_CMD_DFU=y
configs: am65x_evm_a53: Add Support for creating GPT partitions Add Support for creating GPT partitions in U-boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-06-10 19:13:44 +00:00
CONFIG_CMD_GPT=y
configs: am65x_evm_defconfig: Enable I2C support Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:16 +00:00
CONFIG_CMD_I2C=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_CMD_MMC=y
configs: am65x_evm_a53: enable PCIe support Enable support for PCIe and related configurations on AM654 EVM platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-01 13:42:59 +00:00
CONFIG_CMD_PCI=y
configs: am65x_evm_a53: Enable R5F remoteproc driver Enable the R5F remoteproc driver for the AM65x GP EVM so that the MCU domain R5F cores can be booted from A53 U-boot. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-04 10:31:47 +00:00
CONFIG_CMD_REMOTEPROC=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_CMD_USB=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs)"
CONFIG_CMD_UBI=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
configs: am65x: Add configs to support environment in eMMC Add configs such that U-boot environment is in eMMC by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-06-10 19:13:42 +00:00
CONFIG_ENV_IS_IN_MMC=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 21:14:47 +00:00
CONFIG_SYS_MMC_ENV_PART=1
configs: am65x_evm_a53: enable networking Enable TI K3 AM65x CPSW NUSS driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-09 05:00:37 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
configs: am65x_evm: Enable CONFIG_REGMAP Add Support for CONFIG_REGMAP. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-10 19:13:39 +00:00
CONFIG_SPL_REGMAP=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_SYSCON=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_SPL_OF_TRANSLATE=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_TI_SCI=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_DFU_SF=y
usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-01 11:21:47 +00:00
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x20000
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
configs: am65x_evm_a53: Enable DMA related configs Enable TI K3 AM65x PSI-L, Ring Accelerator and UDMA drivers Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-05 12:01:27 +00:00
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_TI_SCI_PROTOCOL=y
configs: am65x_evm_a53: Enable PCA953X-type GPIO driver Enable GPIO driver for PCA953X-compatible I2C-based I/O expander which includes support for the TCA9554/PCA9554-type expander found on the AM654 EVM base board. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:19 +00:00
CONFIG_DM_PCA953X=y
configs: am65x_evm_defconfig: Enable I2C support Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:16 +00:00
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
configs: am65x_evm: Add configs for UHS modes Add configs for voltage switching and UHS modes for the SD card and HS200 for the eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:41:05 +00:00
CONFIG_DM_I2C_GPIO=y
configs: am65x_evm_defconfig: Enable I2C support Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:16 +00:00
CONFIG_SYS_I2C_OMAP24XX=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
configs: am65x_evm: Add CONFIG_SUPPORT_EMMC_BOOT With CONFIG_SUPPORT_EMMC_BOOT moved to Kconfig, move it to defconfig files. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-26 08:14:38 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
configs: am65x_evm: Add configs for UHS modes Add configs for voltage switching and UHS modes for the SD card and HS200 for the eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:41:05 +00:00
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_SPL_MMC_HS200_SUPPORT=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_MMC_SDHCI=y
configs: am65x_evm: Add Support for ADMA Add Support for ADMA in a53 and r5 defconfigs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-19 08:36:41 +00:00
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_SPL_MMC_SDHCI_ADMA=y
arm64: dts: k3: Sync sdhci0 node from kernel and change driver name Sync the sdhci0 node from kernel. This changes the compatible that is required to be there in the driver. Change the same for the SD card node which is not yet supported in kernel. This also syncs the main_pmx0 node as a side effect. Also change the name of the driver to match the compatible in kernel. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-10 19:13:31 +00:00
CONFIG_MMC_SDHCI_AM654=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
net: phy: Add support for TI PHY init ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-05-04 21:14:39 +00:00
CONFIG_PHY_TI_DP83867=y
configs: am65x_evm_a53: enable networking Enable TI K3 AM65x CPSW NUSS driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-09 05:00:37 +00:00
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
configs: am65x_evm_a53: enable support for PCIe ethernet cards Enable support for Intel E1000 based PCIe ethernet cards that can be used to test PCIe RC functionality on AM65x EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-01 13:43:01 +00:00
CONFIG_E1000=y
CONFIG_CMD_E1000=y
configs: am65x_evm_a53: enable networking Enable TI K3 AM65x CPSW NUSS driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-09 05:00:37 +00:00
CONFIG_TI_AM65_CPSW_NUSS=y
configs: am65x_evm_a53: enable PCIe support Enable support for PCIe and related configurations on AM654 EVM platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-01 13:42:59 +00:00
CONFIG_PCI=y
CONFIG_PCI_KEYSTONE=y
configs: am65x_evm_a53: enable support for PCIe ethernet cards Enable support for Intel E1000 based PCIe ethernet cards that can be used to test PCIe RC functionality on AM65x EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-01 13:43:01 +00:00
CONFIG_PHY=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_PHY=y
configs: am65x_evm_a53: enable PCIe support Enable support for PCIe and related configurations on AM654 EVM platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-01 13:42:59 +00:00
CONFIG_AM654_PHY=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_OMAP_USB2_PHY=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_GENERIC is not set
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_GENERIC is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_POWER_DOMAIN=y
CONFIG_TI_SCI_POWER_DOMAIN=y
configs: am65x_evm: Add configs for UHS modes Add configs for voltage switching and UHS modes for the SD card and HS200 for the eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:41:05 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
configs: am65x_evm_a53: Enable R5F remoteproc driver Enable the R5F remoteproc driver for the AM65x GP EVM so that the MCU domain R5F cores can be booted from A53 U-boot. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-04 10:31:47 +00:00
CONFIG_REMOTEPROC_TI_K3_R5F=y
configs: am65x_evm_a53: Enable PRUSS remoteproc Enable PRUSS remoteproc driver for AM65 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210622063431.3151-6-lokeshvutla@ti.com
2021-06-22 06:34:31 +00:00
CONFIG_REMOTEPROC_TI_PRU=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_DM_RESET=y
CONFIG_RESET_TI_SCI=y
CONFIG_DM_SERIAL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_SOC_DEVICE=y
CONFIG_SOC_DEVICE_TI_K3=y
configs: am65x_evm_a53: Enable DMA related configs Enable TI K3 AM65x PSI-L, Ring Accelerator and UDMA drivers Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-05 12:01:27 +00:00
CONFIG_SOC_TI=y
configs: am65x_evm_a53: Enable PRUSS remoteproc Enable PRUSS remoteproc driver for AM65 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210622063431.3151-6-lokeshvutla@ti.com
2021-06-22 06:34:31 +00:00
CONFIG_TI_PRUSS=y
configs: am65x_evm_defconfig: Enable OSPI configs Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:56 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SYSRESET=y
sysreset: enable driver support in SPL/TPL SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-04-02 12:41:25 +00:00
CONFIG_SPL_SYSRESET=y
configs: am65x_evm_a53: Add initial support Add initial defconfig support for AM65x that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:10 +00:00
CONFIG_SYSRESET_TI_SCI=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-03 06:05:14 +00:00
CONFIG_SPL_DM_USB_GADGET=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
configs: am65x_evm: Enable USB keyboard as second stdin Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:36 +00:00
CONFIG_USB_KEYBOARD=y
am65x_evm_a53_defconfig: Enable configs to support USB and DFU Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 05:07:35 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0x6162
CONFIG_USB_GADGET_DOWNLOAD=y
configs: am65x_evm: Add support for applying overlays This will allow for downloading and applying overlays from an MMC/SD boot media based on the overlay_files ENV variable containing a list of overlay files. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:27 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
configs: am65x_evm_a53: Enable config for phandle check while getting sequence number AM65x SoC has two USB subsystems and their corresponding device tree nodes have the same name but different path. While allocating sequence numbers for these device tree nodes using alias, phandles can be used to distinguish them. Enable config for phandle check while getting sequence number to distinguish the USB device tree nodes. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-01-13 07:36:15 +00:00
CONFIG_PHANDLE_CHECK_SEQ=y
Reference in a new issue Copy permalink