Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/ls1012ardb/Kconfig

121 lines
2 KiB
Text
Raw Normal View History

armv8: ls1012a: Add support of ls1012ardb board QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:35 +00:00
if TARGET_LS1012ARDB
config SYS_BOARD
default "ls1012ardb"
config SYS_VENDOR
default "freescale"
config SYS_SOC
default "fsl-layerscape"
config SYS_CONFIG_NAME
default "ls1012ardb"
board: Kconfig: Re-Arrangement of PPA firmware and header addresses PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-23 05:33:29 +00:00
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40400000
if CHAIN_OF_TRUST
config SYS_LS_PPA_ESBC_ADDR
hex "PPA Firmware HDR Addr"
default 0x40680000
net: pfe_eth: read PFE ESBC header flash with spi_flash_read API Read PFE ESBC header flash with spi_flash_read API - logs as follows, Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB "Synchronous Abort" handler, esr 0x96000210 elr: 000000008206db44 lr : 0000000082004ea0 (reloc) elr: 00000000b7ba6b44 lr : 00000000b7b3dea0 x0 : 00000000b79407e8 x1 : 0000000040640000 x2 : 0000000000000050 x3 : 0000000000000000 x4 : 000000000000000a x5 : 0000000000000050 x6 : 0000000000000366 x7 : 00000000b7942308 x8 : 00000000b76407c0 x9 : 0000000000000008 x10: 0000000000000044 x11: 00000000b7634d1c x12: 000000000000004f x13: 0000000000000044 x14: 00000000b7634d98 x15: 00000000b76407c0 x16: 0000000000000000 x17: 0000000000000000 x18: 00000000b7636dd8 x19: 0000000000000000 x20: 00000000b79407d0 x21: 00000000b79407e8 x22: 0000000040640000 x23: 00000000b7634e58 x24: 0000000000000000 x25: 0000000003800000 x26: 00000000b7bdd000 x27: 0000000000000000 x28: 0000000000000000 x29: 00000000b7634d10 Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826) Resetting CPU ... Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-11-05 11:28:12 +00:00
config SYS_LS_PFE_ESBC_ADDR
hex "PFE Firmware HDR Addr"
default 0x40640000
config SYS_LS_PFE_ESBC_LENGTH
hex "length of PFE Firmware HDR"
default 0xc00
board: Kconfig: Re-Arrangement of PPA firmware and header addresses PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-23 05:33:29 +00:00
endif
board: freescale: ls1012ardb: enable network support on ls1012ardb This patch enables ethernet support for ls1012ardb. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-08 10:00:30 +00:00
if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select PHYLIB
imply PHY_REALTEK
config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40a00000
net: pfe_eth: read PFE ESBC header flash with spi_flash_read API Read PFE ESBC header flash with spi_flash_read API - logs as follows, Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB "Synchronous Abort" handler, esr 0x96000210 elr: 000000008206db44 lr : 0000000082004ea0 (reloc) elr: 00000000b7ba6b44 lr : 00000000b7b3dea0 x0 : 00000000b79407e8 x1 : 0000000040640000 x2 : 0000000000000050 x3 : 0000000000000000 x4 : 000000000000000a x5 : 0000000000000050 x6 : 0000000000000366 x7 : 00000000b7942308 x8 : 00000000b76407c0 x9 : 0000000000000008 x10: 0000000000000044 x11: 00000000b7634d1c x12: 000000000000004f x13: 0000000000000044 x14: 00000000b7634d98 x15: 00000000b76407c0 x16: 0000000000000000 x17: 0000000000000000 x18: 00000000b7636dd8 x19: 0000000000000000 x20: 00000000b79407d0 x21: 00000000b79407e8 x22: 0000000040640000 x23: 00000000b7634e58 x24: 0000000000000000 x25: 0000000003800000 x26: 00000000b7bdd000 x27: 0000000000000000 x28: 0000000000000000 x29: 00000000b7634d10 Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826) Resetting CPU ... Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-11-05 11:28:12 +00:00
config SYS_LS_PFE_FW_LENGTH
hex "length of PFE firmware"
default 0x300000
armv8: ls1012ardb: Add TFABOOT support TFABOOT support includes: - ls1012ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - enable PFE validation for secure boot Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-11-05 18:02:53 +00:00
board: freescale: ls1012ardb: enable network support on ls1012ardb This patch enables ethernet support for ls1012ardb. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-08 10:00:30 +00:00
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
default 0x03800000
config DDR_PFE_BASEADDR
hex "PFE DDR base address"
default 0x83800000
config PFE_EMAC1_PHY_ADDR
hex "PFE DDR base address"
default 0x2
config PFE_EMAC2_PHY_ADDR
hex "PFE DDR base address"
default 0x1
endif
armv8: ls1012a: Add support of ls1012ardb board QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:35 +00:00
endif
board: ls1012a: LS1012A-2G5RDB board support LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-11 14:33:31 +00:00
if TARGET_LS1012A2G5RDB
config SYS_BOARD
default "ls1012ardb"
config SYS_VENDOR
default "freescale"
config SYS_SOC
default "fsl-layerscape"
config SYS_CONFIG_NAME
default "ls1012a2g5rdb"
board: Kconfig: Re-Arrangement of PPA firmware and header addresses PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-23 05:33:29 +00:00
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40400000
board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb This patch enables ethernet support for ls1012a2g5rdb. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-08 10:00:31 +00:00
if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select PHYLIB
board: ls1012ardb: do not use imply CONFIG_ Inside Kconfig we must not use the CONFIG_ prefix with the imply statement. Fixes: 28e3c39e535b ("board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-25 19:40:21 +00:00
imply PHYLIB_10G
imply PHY_AQUANTIA
board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb This patch enables ethernet support for ls1012a2g5rdb. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-08 10:00:31 +00:00
config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40a00000
net: pfe_eth: read PFE ESBC header flash with spi_flash_read API Read PFE ESBC header flash with spi_flash_read API - logs as follows, Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB "Synchronous Abort" handler, esr 0x96000210 elr: 000000008206db44 lr : 0000000082004ea0 (reloc) elr: 00000000b7ba6b44 lr : 00000000b7b3dea0 x0 : 00000000b79407e8 x1 : 0000000040640000 x2 : 0000000000000050 x3 : 0000000000000000 x4 : 000000000000000a x5 : 0000000000000050 x6 : 0000000000000366 x7 : 00000000b7942308 x8 : 00000000b76407c0 x9 : 0000000000000008 x10: 0000000000000044 x11: 00000000b7634d1c x12: 000000000000004f x13: 0000000000000044 x14: 00000000b7634d98 x15: 00000000b76407c0 x16: 0000000000000000 x17: 0000000000000000 x18: 00000000b7636dd8 x19: 0000000000000000 x20: 00000000b79407d0 x21: 00000000b79407e8 x22: 0000000040640000 x23: 00000000b7634e58 x24: 0000000000000000 x25: 0000000003800000 x26: 00000000b7bdd000 x27: 0000000000000000 x28: 0000000000000000 x29: 00000000b7634d10 Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826) Resetting CPU ... Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-11-05 11:28:12 +00:00
config SYS_LS_PFE_FW_LENGTH
hex "length of PFE firmware"
default 0x300000
board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb This patch enables ethernet support for ls1012a2g5rdb. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-08 10:00:31 +00:00
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
default 0x03800000
config DDR_PFE_BASEADDR
hex "PFE DDR base address"
default 0x83800000
config PFE_EMAC1_PHY_ADDR
hex "PFE DDR base address"
default 0x2
config PFE_EMAC2_PHY_ADDR
hex "PFE DDR base address"
default 0x1
endif
board: ls1012a: LS1012A-2G5RDB board support LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-11 14:33:31 +00:00
endif
Reference in a new issue Copy permalink