powerpc/t2080qds: add support for t2080qds board
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080QDS feature overview
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: removed Makefile blank line at EOF,
fix conflicts with moving DDR driver]
Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:11 +00:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __DDR_H__
|
|
|
|
#define __DDR_H__
|
|
|
|
struct board_specific_parameters {
|
|
|
|
u32 n_ranks;
|
|
|
|
u32 datarate_mhz_high;
|
|
|
|
u32 rank_gb;
|
|
|
|
u32 clk_adjust;
|
|
|
|
u32 wrlvl_start;
|
|
|
|
u32 wrlvl_ctl_2;
|
|
|
|
u32 wrlvl_ctl_3;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* These tables contain all valid speeds we want to override with board
|
|
|
|
* specific parameters. datarate_mhz_high values need to be in ascending order
|
|
|
|
* for each n_ranks group.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static const struct board_specific_parameters udimm0[] = {
|
|
|
|
/*
|
|
|
|
* memory controller 0
|
2014-05-20 04:08:20 +00:00
|
|
|
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
|
|
|
|
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
|
powerpc/t2080qds: add support for t2080qds board
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080QDS feature overview
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: removed Makefile blank line at EOF,
fix conflicts with moving DDR driver]
Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:11 +00:00
|
|
|
*/
|
2016-05-04 02:20:22 +00:00
|
|
|
{2, 1200, 0, 10, 7, 0x0708090a, 0x0b0c0d09},
|
|
|
|
{2, 1400, 0, 10, 7, 0x08090a0c, 0x0d0e0f0a},
|
|
|
|
{2, 1700, 0, 10, 8, 0x090a0b0c, 0x0e10110c},
|
|
|
|
{2, 1900, 0, 10, 8, 0x090b0c0f, 0x1012130d},
|
|
|
|
{2, 2140, 0, 10, 8, 0x090b0c0f, 0x1012130d},
|
|
|
|
{1, 1200, 0, 10, 7, 0x0808090a, 0x0b0c0c0a},
|
|
|
|
{1, 1500, 0, 10, 6, 0x07070809, 0x0a0b0b09},
|
|
|
|
{1, 1600, 0, 10, 8, 0x090b0b0d, 0x0d0e0f0b},
|
|
|
|
{1, 1700, 0, 8, 8, 0x080a0a0c, 0x0c0d0e0a},
|
|
|
|
{1, 1900, 0, 10, 8, 0x090a0c0d, 0x0e0f110c},
|
|
|
|
{1, 2140, 0, 8, 8, 0x090a0b0d, 0x0e0f110b},
|
powerpc/t2080qds: add support for t2080qds board
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080QDS feature overview
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: removed Makefile blank line at EOF,
fix conflicts with moving DDR driver]
Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:11 +00:00
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct board_specific_parameters rdimm0[] = {
|
|
|
|
/*
|
|
|
|
* memory controller 0
|
2014-01-13 05:01:06 +00:00
|
|
|
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
|
|
|
|
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
|
powerpc/t2080qds: add support for t2080qds board
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080QDS feature overview
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: removed Makefile blank line at EOF,
fix conflicts with moving DDR driver]
Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:11 +00:00
|
|
|
*/
|
2014-01-13 05:01:06 +00:00
|
|
|
/* TODO: need tuning these parameters if RDIMM is used */
|
2016-05-04 02:20:22 +00:00
|
|
|
{4, 1350, 0, 10, 9, 0x08070605, 0x06070806},
|
|
|
|
{4, 1666, 0, 10, 11, 0x0a080706, 0x07090906},
|
|
|
|
{4, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07},
|
|
|
|
{2, 1350, 0, 10, 9, 0x08070605, 0x06070806},
|
|
|
|
{2, 1666, 0, 10, 11, 0x0a090806, 0x08090a06},
|
|
|
|
{2, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07},
|
|
|
|
{1, 1350, 0, 10, 9, 0x08070605, 0x06070806},
|
|
|
|
{1, 1666, 0, 10, 11, 0x0a090806, 0x08090a06},
|
|
|
|
{1, 2140, 0, 8, 12, 0x0b090807, 0x080a0b07},
|
powerpc/t2080qds: add support for t2080qds board
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080QDS feature overview
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: removed Makefile blank line at EOF,
fix conflicts with moving DDR driver]
Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:11 +00:00
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct board_specific_parameters *udimms[] = {
|
|
|
|
udimm0,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct board_specific_parameters *rdimms[] = {
|
|
|
|
rdimm0,
|
|
|
|
};
|
|
|
|
#endif
|