Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-15 07:43:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/imx8mp_dhcom_pdk2_defconfig

264 lines
6.4 KiB
Text
Raw Normal View History

ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0x40200000
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_SYS_MALLOC_LEN=0x1000000
CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_SF_DEFAULT_SPEED=50000000
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0xFE0000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk2"
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23 19:24:14 +00:00
CONFIG_SYS_PROMPT="u-boot=> "
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 14:58:06 +00:00
CONFIG_DM_RESET=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29 14:43:26 +00:00
CONFIG_SYS_MONITOR_LEN=1048576
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 14:58:06 +00:00
CONFIG_SPL_STACK=0x96fc00
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_DEBUG_UART_BASE=0x30860000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_ENV_OFFSET_REDUND=0xFF0000
CONFIG_IMX_BOOTAUX=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_DEBUG_UART=y
ARM: imx: Enable LTO for DH electronics i.MX8M Plus DHCOM Enable LTO to reduce the size of SPL, which with multiple DRAM calibration tables may be close to the limit. Signed-off-by: Marek Vasut <marex@denx.de>
2023-02-11 21:48:24 +00:00
CONFIG_LTO=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk2.dtb"
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-19 19:09:22 +00:00
CONFIG_SPL_MAX_SIZE=0x25000
Convert CONFIG_SPL_BSS_START_ADDR to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 14:19:45 +00:00
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x96fc00
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-19 19:09:22 +00:00
CONFIG_SPL_BSS_MAX_SIZE=0x400
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
Convert CONFIG_SPL_STACK to Kconfig This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-26 17:13:21 +00:00
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 16:48:32 +00:00
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4c000000
CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=64
Convert CONFIG_SYS_CBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 22:01:06 +00:00
CONFIG_SYS_CBSIZE=2048
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=2081
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
Convert CONFIG_SYS_BOOTM_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 23:29:46 +00:00
CONFIG_SYS_BOOTM_LEN=0x8000000
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_EXPORTENV is not set
CONFIG_CMD_ERASEENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_SYS_EEPROM_SIZE=16384
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
CONFIG_CMD_MD5SUM=y
CONFIG_MD5SUM_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_SHA1SUM=y
CONFIG_SHA1SUM_VERIFY=y
ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM. This is useful for bringing up systems without ethernet plug, but with either USB host or gadget plug. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2022-08-12 20:41:49 +00:00
CONFIG_CMD_BIND=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPT_RENAME=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MBR=y
CONFIG_CMD_MMC=y
CONFIG_CMD_BKOPS_ENABLE=y
CONFIG_CMD_MTD=y
CONFIG_CMD_PART=y
CONFIG_CMD_READ=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_PXE=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_GETTIME=y
CONFIG_CMD_SYSBOOT=y
CONFIG_CMD_UUID=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_HASH=y
CONFIG_CMD_SMC=y
CONFIG_HASH_VERIFY=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_FS_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SECT_SIZE_AUTO=y
CONFIG_ENV_SPI_MAX_HZ=80000000
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_TSIZE=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_IMX8MP=y
CONFIG_CLK_IMX8MP=y
CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
CONFIG_DFU_TFTP=y
CONFIG_DFU_TIMEOUT=y
CONFIG_DFU_MMC=y
CONFIG_DFU_MTD=y
CONFIG_DFU_RAM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x42800000
CONFIG_FASTBOOT_BUF_SIZE=0x20000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_GPIO_HOG=y
ARM: imx: Enable SPL GPIO hog on i.MX8M Plus DHCOM Enable GPIO hog support in SPL to match the GPIO hog support in U-Boot proper. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-08-26 21:16:27 +00:00
CONFIG_SPL_GPIO_HOG=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_MXC_GPIO=y
CONFIG_DM_I2C=y
# CONFIG_INPUT is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_SPL_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_SPL_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
arm64: imx8mp: Enable SMSC LAN87xx PHY driver on i.MX8MP DHCOM These SoMs may ship with SMSC LAN8740Ai PHYs, enable the SMSC PHY driver. Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-19 21:46:11 +00:00
CONFIG_PHY_SMSC=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_DM_MDIO=y
CONFIG_DM_ETH_PHY=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_IMX=y
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PHY_IMX8MQ_USB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_POWER_DOMAIN=y
CONFIG_IMX8M_POWER_DOMAIN=y
CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PCA9450=y
CONFIG_SPL_DM_PMIC_PCA9450=y
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_PCA9450=y
CONFIG_SPL_DM_REGULATOR_PCA9450=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_RTC=y
CONFIG_RTC_M41T62=y
CONFIG_CONS_INDEX=2
CONFIG_DM_SERIAL=y
# CONFIG_SPL_DM_SERIAL is not set
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_NXP_FSPI=y
CONFIG_MXC_SPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_TMU=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM. This is useful for bringing up systems without ethernet plug, but with either USB host or gadget plug. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2022-08-12 20:41:49 +00:00
CONFIG_DM_USB_GADGET=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_STORAGE=y
ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM. This is useful for bringing up systems without ethernet plug, but with either USB host or gadget plug. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2022-08-12 20:41:49 +00:00
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_SDP_LOADADDR=0x0
CONFIG_USB_FUNCTION_ACM=y
ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM. This is useful for bringing up systems without ethernet plug, but with either USB host or gadget plug. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2022-08-12 20:41:49 +00:00
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
CONFIG_IMX_WATCHDOG=y
Reference in a new issue Copy permalink