u-boot/drivers/mtd/spi/sf_probe.c

178 lines
3.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* SPI flash probing
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <spi.h>
#include <spi_flash.h>
#include "sf_internal.h"
/**
* spi_flash_probe_slave() - Probe for a SPI flash device on a bus
*
* @flashp: Pointer to place to put flash info, which may be NULL if the
* space should be allocated
*/
static int spi_flash_probe_slave(struct spi_flash *flash)
{
struct spi_slave *spi = flash->spi;
int ret;
/* Setup spi_slave */
if (!spi) {
printf("SF: Failed to set up slave\n");
return -ENODEV;
}
/* Claim spi bus */
ret = spi_claim_bus(spi);
if (ret) {
debug("SF: Failed to claim SPI bus: %d\n", ret);
return ret;
}
ret = spi_flash_scan(flash);
if (ret)
goto err_read_id;
mtd, spi: Add MTD layer driver Add MTD layer driver for spi, original patch from: http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced Changes from Heiko Schocher against this patch: - Remove compile error if not defining CONFIG_SPI_FLASH_MTD: LD drivers/mtd/spi/built-in.o drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1 make: *** [drivers/mtd/spi] Fehler 2 - Add a README entry. - Add correct writebufsize, to fit with Linux v3.14 MTD, UBI/UBIFS sync. Note (From Jagan): For testing raw mtd parition erase/read/write operations using cmd_sf, sf_mtd should be required to register the spi flash device to MTD layer but the sf_mtd_info ops were not required until and unless if we use any flash filesystem layer say for example UBI. Due to this the foot-print got increased ~290bytes in non-UBI case here that should be acceptible. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Jagannadh Teki <jteki@openedev.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-04-27 05:42:04 +00:00
#ifdef CONFIG_SPI_FLASH_MTD
ret = spi_flash_mtd_register(flash);
#endif
err_read_id:
spi_release_bus(spi);
return ret;
}
#ifndef CONFIG_DM_SPI_FLASH
struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
struct spi_slave *bus;
struct spi_flash *flash;
bus = spi_setup_slave(busnum, cs, max_hz, spi_mode);
if (!bus)
return NULL;
/* Allocate space if needed (not used by sf-uclass */
flash = calloc(1, sizeof(*flash));
if (!flash) {
debug("SF: Failed to allocate spi_flash\n");
return NULL;
}
flash->spi = bus;
if (spi_flash_probe_slave(flash)) {
spi_free_slave(bus);
free(flash);
return NULL;
}
return flash;
}
void spi_flash_free(struct spi_flash *flash)
{
mtd, spi: Add MTD layer driver Add MTD layer driver for spi, original patch from: http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced Changes from Heiko Schocher against this patch: - Remove compile error if not defining CONFIG_SPI_FLASH_MTD: LD drivers/mtd/spi/built-in.o drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1 make: *** [drivers/mtd/spi] Fehler 2 - Add a README entry. - Add correct writebufsize, to fit with Linux v3.14 MTD, UBI/UBIFS sync. Note (From Jagan): For testing raw mtd parition erase/read/write operations using cmd_sf, sf_mtd should be required to register the spi flash device to MTD layer but the sf_mtd_info ops were not required until and unless if we use any flash filesystem layer say for example UBI. Due to this the foot-print got increased ~290bytes in non-UBI case here that should be acceptible. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Jagannadh Teki <jteki@openedev.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-04-27 05:42:04 +00:00
#ifdef CONFIG_SPI_FLASH_MTD
spi_flash_mtd_unregister();
#endif
spi_free_slave(flash->spi);
free(flash);
}
#else /* defined CONFIG_DM_SPI_FLASH */
static int spi_flash_std_read(struct udevice *dev, u32 offset, size_t len,
void *buf)
{
struct spi_flash *flash = dev_get_uclass_priv(dev);
return log_ret(spi_flash_cmd_read_ops(flash, offset, len, buf));
}
static int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
const void *buf)
{
struct spi_flash *flash = dev_get_uclass_priv(dev);
#if defined(CONFIG_SPI_FLASH_SST)
if (flash->flags & SNOR_F_SST_WR) {
if (flash->spi->mode & SPI_TX_BYTE)
return sst_write_bp(flash, offset, len, buf);
else
return sst_write_wp(flash, offset, len, buf);
}
#endif
return spi_flash_cmd_write_ops(flash, offset, len, buf);
}
static int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len)
{
struct spi_flash *flash = dev_get_uclass_priv(dev);
return spi_flash_cmd_erase_ops(flash, offset, len);
}
static int spi_flash_std_get_sw_write_prot(struct udevice *dev)
{
struct spi_flash *flash = dev_get_uclass_priv(dev);
return spi_flash_cmd_get_sw_write_prot(flash);
}
static int spi_flash_std_probe(struct udevice *dev)
{
struct spi_slave *slave = dev_get_parent_priv(dev);
struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
struct spi_flash *flash;
flash = dev_get_uclass_priv(dev);
flash->dev = dev;
flash->spi = slave;
debug("%s: slave=%p, cs=%d\n", __func__, slave, plat->cs);
return spi_flash_probe_slave(flash);
}
static int spi_flash_std_remove(struct udevice *dev)
{
#ifdef CONFIG_SPI_FLASH_MTD
spi_flash_mtd_unregister();
#endif
return 0;
}
static const struct dm_spi_flash_ops spi_flash_std_ops = {
.read = spi_flash_std_read,
.write = spi_flash_std_write,
.erase = spi_flash_std_erase,
.get_sw_write_prot = spi_flash_std_get_sw_write_prot,
};
static const struct udevice_id spi_flash_std_ids[] = {
{ .compatible = "spi-flash" },
{ }
};
U_BOOT_DRIVER(spi_flash_std) = {
.name = "spi_flash_std",
.id = UCLASS_SPI_FLASH,
.of_match = spi_flash_std_ids,
.probe = spi_flash_std_probe,
.remove = spi_flash_std_remove,
.priv_auto_alloc_size = sizeof(struct spi_flash),
.ops = &spi_flash_std_ops,
};
#endif /* CONFIG_DM_SPI_FLASH */