u-boot/arch/arm/include/asm/pl310.h

95 lines
2.2 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
* Aneesh V <aneesh@ti.com>
*/
#ifndef _PL310_H_
#define _PL310_H_
/* Register bit fields */
#define PL310_AUX_CTRL_ASSOCIATIVITY_MASK (1 << 16)
#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1)
#define L2X0_STNDBY_MODE_EN (1 << 0)
#define L2X0_CTRL_EN 1
arm: mvebu: Fix moving internal registers Commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") moved code from file cpu.c to lowlevel.c, which moves Marvell internal registers from address INTREG_BASE_ADDR_REG to SOC_REGS_PHY_BASE. But the steps describing how to do it correctly were documented only in older U-Boot versions and commit cefd764222ee ("arm: mvebu: Fix internal register config on A38x") probably unintentionally removed important details about MMU from code comments around. Commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") implemented code movement according to (now incomplete) comments which resulted in semi-broken code. The result is that I-cache is currently disabled for all Armada 38x boards and maybe there are some other (unreported / undetected) issues. Reimplement it correctly. First flush all caches, then disable MMU and L2 cache and then move Marvell internal registers. There is no need to explicitly disable I-cache. After this change lzmadec command with lzma image of 0x7000000 bytes is doing decompression just 5 seconds. Before this change it was 30 seconds. To make lowlevel.S code more readable, extend asm/pl310.h header file to be compatible with assembler and use macros from this file. Fixes: 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-08 14:06:54 +00:00
#define L2X0_CTRL_OFF 0x100
#define L310_SHARED_ATT_OVERRIDE_ENABLE (1 << 22)
#define L310_AUX_CTRL_DATA_PREFETCH_MASK (1 << 28)
#define L310_AUX_CTRL_INST_PREFETCH_MASK (1 << 29)
#define L310_LATENCY_CTRL_SETUP(n) ((n) << 0)
#define L310_LATENCY_CTRL_RD(n) ((n) << 4)
#define L310_LATENCY_CTRL_WR(n) ((n) << 8)
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_ID_RTL_MASK 0x3f
#define L2X0_CACHE_ID_RTL_R3P2 0x8
arm: mvebu: Fix moving internal registers Commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") moved code from file cpu.c to lowlevel.c, which moves Marvell internal registers from address INTREG_BASE_ADDR_REG to SOC_REGS_PHY_BASE. But the steps describing how to do it correctly were documented only in older U-Boot versions and commit cefd764222ee ("arm: mvebu: Fix internal register config on A38x") probably unintentionally removed important details about MMU from code comments around. Commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") implemented code movement according to (now incomplete) comments which resulted in semi-broken code. The result is that I-cache is currently disabled for all Armada 38x boards and maybe there are some other (unreported / undetected) issues. Reimplement it correctly. First flush all caches, then disable MMU and L2 cache and then move Marvell internal registers. There is no need to explicitly disable I-cache. After this change lzmadec command with lzma image of 0x7000000 bytes is doing decompression just 5 seconds. Before this change it was 30 seconds. To make lowlevel.S code more readable, extend asm/pl310.h header file to be compatible with assembler and use macros from this file. Fixes: 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-08 14:06:54 +00:00
#ifndef __ASSEMBLY__
#include <linux/types.h>
struct pl310_regs {
u32 pl310_cache_id;
u32 pl310_cache_type;
u32 pad1[62];
u32 pl310_ctrl;
u32 pl310_aux_ctrl;
u32 pl310_tag_latency_ctrl;
u32 pl310_data_latency_ctrl;
u32 pad2[60];
u32 pl310_event_cnt_ctrl;
u32 pl310_event_cnt1_cfg;
u32 pl310_event_cnt0_cfg;
u32 pl310_event_cnt1_val;
u32 pl310_event_cnt0_val;
u32 pl310_intr_mask;
u32 pl310_masked_intr_stat;
u32 pl310_raw_intr_stat;
u32 pl310_intr_clear;
u32 pad3[323];
u32 pl310_cache_sync;
u32 pad4[15];
u32 pl310_inv_line_pa;
u32 pad5[2];
u32 pl310_inv_way;
u32 pad6[12];
u32 pl310_clean_line_pa;
u32 pad7[1];
u32 pl310_clean_line_idx;
u32 pl310_clean_way;
u32 pad8[12];
u32 pl310_clean_inv_line_pa;
u32 pad9[1];
u32 pl310_clean_inv_line_idx;
u32 pl310_clean_inv_way;
u32 pad10[64];
u32 pl310_lockdown_dbase;
u32 pl310_lockdown_ibase;
u32 pad11[190];
u32 pl310_addr_filter_start;
u32 pl310_addr_filter_end;
u32 pad12[190];
u32 pl310_test_operation;
u32 pad13[3];
u32 pl310_line_data;
u32 pad14[7];
u32 pl310_line_tag;
u32 pad15[3];
u32 pl310_debug_ctrl;
u32 pad16[7];
u32 pl310_prefetch_ctrl;
u32 pad17[7];
u32 pl310_power_ctrl;
};
void pl310_inval_all(void);
void pl310_clean_inval_all(void);
void pl310_inval_range(u32 start, u32 end);
void pl310_clean_inval_range(u32 start, u32 end);
#endif
arm: mvebu: Fix moving internal registers Commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") moved code from file cpu.c to lowlevel.c, which moves Marvell internal registers from address INTREG_BASE_ADDR_REG to SOC_REGS_PHY_BASE. But the steps describing how to do it correctly were documented only in older U-Boot versions and commit cefd764222ee ("arm: mvebu: Fix internal register config on A38x") probably unintentionally removed important details about MMU from code comments around. Commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") implemented code movement according to (now incomplete) comments which resulted in semi-broken code. The result is that I-cache is currently disabled for all Armada 38x boards and maybe there are some other (unreported / undetected) issues. Reimplement it correctly. First flush all caches, then disable MMU and L2 cache and then move Marvell internal registers. There is no need to explicitly disable I-cache. After this change lzmadec command with lzma image of 0x7000000 bytes is doing decompression just 5 seconds. Before this change it was 30 seconds. To make lowlevel.S code more readable, extend asm/pl310.h header file to be compatible with assembler and use macros from this file. Fixes: 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-08 14:06:54 +00:00
#endif