u-boot/arch/x86/cpu/queensbay/Kconfig

#
# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
#
# SPDX-License-Identifier:	GPL-2.0+
#

config INTEL_QUEENSBAY
	bool
	select HAVE_FSP
	select HAVE_CMC

if INTEL_QUEENSBAY

config HAVE_FSP
	bool "Add an Firmware Support Package binary"
	help
	  Select this option to add an Firmware Support Package binary to
	  the resulting U-Boot image. It is a binary blob which U-Boot uses
	  to set up SDRAM and other chipset specific initialization.

	  Note: Without this binary U-Boot will not be able to set up its
	  SDRAM so will not boot.

config FSP_FILE
	string "Firmware Support Package binary filename"
	depends on HAVE_FSP
	default "fsp.bin"
	help
	  The filename of the file to use as Firmware Support Package binary
	  in the board directory.

config FSP_ADDR
	hex "Firmware Support Package binary location"
	depends on HAVE_FSP
	default 0xfffc0000
	help
	  FSP is not Position Independent Code (PIC) and the whole FSP has to
	  be rebased if it is placed at a location which is different from the
	  perferred base address specified during the FSP build. Use Intel's
	  Binary Configuration Tool (BCT) to do the rebase.

	  The default base address of 0xfffc0000 indicates that the binary must
	  be located at offset 0xc0000 from the beginning of a 1MB flash device.

config FSP_TEMP_RAM_ADDR
	hex
	default 0x2000000
	help
	  Stack top address which is used in FspInit after DRAM is ready and
	  CAR is disabled.

config HAVE_CMC
	bool "Add a Chipset Micro Code state machine binary"
	help
	  Select this option to add a Chipset Micro Code state machine binary
	  to the resulting U-Boot image. It is a 64K data block of machine
	  specific code which must be put in the flash for the processor to
	  access when powered up before system BIOS is executed.

config CMC_FILE
	string "Chipset Micro Code state machine filename"
	depends on HAVE_CMC
	default "cmc.bin"
	help
	  The filename of the file to use as Chipset Micro Code state machine
	  binary in the board directory.

config CMC_ADDR
	hex "Chipset Micro Code state machine binary location"
	depends on HAVE_CMC
	default 0xfffb0000
	help
	  The location of the CMC binary is determined by a strap. It must be
	  put in flash at a location matching the strap-determined base address.

	  The default base address of 0xfffb0000 indicates that the binary must
	  be located at offset 0xb0000 from the beginning of a 1MB flash device.

endif