u-boot/arch/arm/dts/rk3368-geekbox-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
 */

#include "rk3368-u-boot.dtsi"

&pinctrl {
	u-boot,dm-pre-reloc;
};

&service_msch {
	u-boot,dm-pre-reloc;
};

&dmc {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&pmugrf {
	u-boot,dm-pre-reloc;
};

&cru {
	u-boot,dm-pre-reloc;
};

&grf {
	u-boot,dm-pre-reloc;
};

&uart2 {
	u-boot,dm-pre-reloc;
};
SPDX: Convert all of our multiple license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 18:27:01 -04:00			`// SPDX-License-Identifier: GPL-2.0+ OR X11`
rockchip: add u-boot specific dts for rk3368 based boards Device drivers like debug serial, dmc should be enabled before relocation, so add u-boot.dtsi files to contain devices that should be marked as dm-pre-reloc. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-08-02 21:08:59 +08:00			`/*`
			`* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH`
			`*/`

rockchip: rk3368: sync main rk3368 dtsi from Linux This is the state as of v5.10 + the recently added timer0 phandle targetted at the 5.12 merge window. With this the non-mainline nodes like the dmc move to a separate rk3368-u-boot.dtsi that is included from the board-specific -u-boot.dtsi files, similar to how rk3399 does this. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 2021-02-09 14:47:08 +01:00			`#include "rk3368-u-boot.dtsi"`

rockchip: add u-boot specific dts for rk3368 based boards Device drivers like debug serial, dmc should be enabled before relocation, so add u-boot.dtsi files to contain devices that should be marked as dm-pre-reloc. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-08-02 21:08:59 +08:00			`&pinctrl {`
			`u-boot,dm-pre-reloc;`
			`};`

			`&service_msch {`
			`u-boot,dm-pre-reloc;`
			`};`

			`&dmc {`
			`u-boot,dm-pre-reloc;`
			`status = "okay";`
			`};`

			`&pmugrf {`
			`u-boot,dm-pre-reloc;`
			`};`

			`&cru {`
			`u-boot,dm-pre-reloc;`
			`};`

			`&grf {`
			`u-boot,dm-pre-reloc;`
			`};`

			`&uart2 {`
			`u-boot,dm-pre-reloc;`
			`};`