Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-25 06:00:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/scripts/Makefile.spl

584 lines
18 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
#
# (C) Copyright 2000-2011
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2011
# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
#
# (C) Copyright 2011
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <aneesh@ti.com>
# Based on top-level Makefile.
#
kbuild: change out-of-tree build This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-04 08:24:24 +00:00
src := $(obj)
# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
kbuild: Use Kbuild.include This commit adjusts some files to use Kbuild.include. - Use cc-option defined in Kbuild.include (Delete cc-option in config.mk) - Use cc-version defined in (Delete cc-version in config.mk) - Move binutils-version and dtc-version to Kbuild.include by analogy to cc-version This commit also adds srctree (same as SRCTREE) to use Kbuild scripts. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:18 +00:00
include $(srctree)/scripts/Kbuild.include
kconfig: switch to single .config configuration When Kconfig for U-boot was examined, one of the biggest issues was how to support multiple images (Normal, SPL, TPL). There were actually two options, "single .config" and "multiple .config". After some discussions and thought experiments, I chose the latter, i.e. to create ".config", "spl/.config", "tpl/.config" for Normal, SPL, TPL, respectively. It is true that the "multiple .config" strategy provided us the maximum flexibility and helped to avoid duplicating CONFIGs among Normal, SPL, TPL, but I have noticed some fatal problems: [1] It is impossible to share CONFIG options across the images. If you change the configuration of Main image, you often have to adjust some SPL configurations correspondingly. Currently, we cannot handle the dependencies between them. It means one of the biggest advantages of Kconfig is lost. [2] It is too painful to change both ".config" and "spl/.config". Sunxi guys started to work around this problem by creating a new configuration target. Commit cbdd9a9737cc (sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms.) added "make *_felconfig" to enable CONFIG_SPL_FEL on both images. Changing the configuration of multiple images in one command is a generic demand. The current implementation cannot propose any good solution about this. [3] Kconfig files are getting ugly and difficult to understand. Commit b724bd7d6349 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files. [4] The build system got more complicated than it should be. To adjust Linux-originated Kconfig to U-Boot, the helper script "scripts/multiconfig.sh" was introduced. Writing a complicated text processor is a shell script sometimes caused problems. Now I believe the "single .config" will serve us better. With it, all the problems above would go away. Instead, we will have to add some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM, but we will not have much. Anyway, this is what we do now in scripts/Makefile.spl. I admit my mistake with my apology and this commit switches to the single .config configuration. It is not so difficult to do that: - Remove unnecessary processings from scripts/multiconfig.sh This file will remain for a while to support the current defconfig format. It will be removed after more cleanups are done. - Adjust some makefiles and Kconfigs - Add some entries to include/config_uncmd_spl.h and the new file scripts/Makefile.uncmd_spl. Some CONFIG options that are not supported on SPL must be disabled because one .config is shared between SPL and U-Boot proper going forward. I know this is not a beautiful solution and I think we can do better, but let's see how much we will have to describe them. - update doc/README.kconfig More cleaning up patches will follow this. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-24 13:26:20 +00:00
-include include/config/auto.conf
kconfig: switch to Kconfig This commit enables Kconfig. Going forward, we use Kconfig for the board configuration. mkconfig will never be used. Nor will include/config.mk be generated. Kconfig must be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel. We have to generate multiple boot images (Normal, SPL, TPL) from one source tree. Each image needs its own configuration input. Usage: Run "make <board>_defconfig" to do the board configuration. It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively. You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one. Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file. The generic syntax of configuration targets for SPL, TPL is: <target_image>/<config_command> Here, <target_image> is either 'spl' or 'tpl' <config_command> is 'config', 'menuconfig', 'xconfig', etc. When the configuration is done, run "make". (Or "make <board>_defconfig all" will do the configuration and build in one time.) For futher information of how Kconfig works in U-Boot, please read the comment block of scripts/multiconfig.py. By the way, there is another item worth remarking here: coexistence of Kconfig and board herder files. Prior to Kconfig, we used C headers to define a set of configs. We expect a very long term to migrate from C headers to Kconfig. Two different infractructure must coexist in the interim. In our former configuration scheme, include/autoconf.mk was generated for use in makefiles. It is still generated under include/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:17 +00:00
-include $(obj)/include/autoconf.mk
Makefile: move some flags to spl/Makefile Some flags are used for SPL (and TPL) build only. This commit moves them from config.mk to spl/Makefile. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:22 +00:00
kbuild: SPL/TPL: generate separate asm-offsets.h for SPL and TPL Currently generic-asm-offsets.h and asm-offsets.h are generated based on U-Boot proper config options. The same asm-offsets headers are used for building U-Boot SPL/TPL, which causes potential offset mismatch if U-Boot proper has different config options from U-Boot SPL/TPL. This commit adds: spl/include/generated/(generic-)asm-offsets.h tpl/include/generated/(generic-)asm-offsets.h spl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_SPL=y, and included when building SPL. tpl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_TPL=y, and included when building TPL. They are created before Kbuild descends into SPL/TPL object directories and builds $(obj)/dts/dt-platdata.o because $(obj)/dts/dt-platdata.c includes a bunch of headers. Prepend -I$(obj)/include to $(UBOOTINCLUDE) so (generic-)asm-offsets.h is searched in {spl,tpl}/include/generated/. Requested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-17 07:21:37 +00:00
UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
kconfig: switch to single .config configuration When Kconfig for U-boot was examined, one of the biggest issues was how to support multiple images (Normal, SPL, TPL). There were actually two options, "single .config" and "multiple .config". After some discussions and thought experiments, I chose the latter, i.e. to create ".config", "spl/.config", "tpl/.config" for Normal, SPL, TPL, respectively. It is true that the "multiple .config" strategy provided us the maximum flexibility and helped to avoid duplicating CONFIGs among Normal, SPL, TPL, but I have noticed some fatal problems: [1] It is impossible to share CONFIG options across the images. If you change the configuration of Main image, you often have to adjust some SPL configurations correspondingly. Currently, we cannot handle the dependencies between them. It means one of the biggest advantages of Kconfig is lost. [2] It is too painful to change both ".config" and "spl/.config". Sunxi guys started to work around this problem by creating a new configuration target. Commit cbdd9a9737cc (sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms.) added "make *_felconfig" to enable CONFIG_SPL_FEL on both images. Changing the configuration of multiple images in one command is a generic demand. The current implementation cannot propose any good solution about this. [3] Kconfig files are getting ugly and difficult to understand. Commit b724bd7d6349 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files. [4] The build system got more complicated than it should be. To adjust Linux-originated Kconfig to U-Boot, the helper script "scripts/multiconfig.sh" was introduced. Writing a complicated text processor is a shell script sometimes caused problems. Now I believe the "single .config" will serve us better. With it, all the problems above would go away. Instead, we will have to add some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM, but we will not have much. Anyway, this is what we do now in scripts/Makefile.spl. I admit my mistake with my apology and this commit switches to the single .config configuration. It is not so difficult to do that: - Remove unnecessary processings from scripts/multiconfig.sh This file will remain for a while to support the current defconfig format. It will be removed after more cleanups are done. - Adjust some makefiles and Kconfigs - Add some entries to include/config_uncmd_spl.h and the new file scripts/Makefile.uncmd_spl. Some CONFIG options that are not supported on SPL must be disabled because one .config is shared between SPL and U-Boot proper going forward. I know this is not a beautiful solution and I think we can do better, but let's see how much we will have to describe them. - update doc/README.kconfig More cleaning up patches will follow this. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-24 13:26:20 +00:00
KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
ifeq ($(CONFIG_TPL_BUILD),y)
KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
endif
TPL : introduce the TPL based on the SPL Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can not be more than 4K. So, the SPL cannot initialize the DDR with the SPD code. This patch introduces TPL to enable a loader stub that is loaded by the code from the SPL. It initializes the DDR with the SPD or other operations. The TPL's size is sizeable, the maximum size is decided by the memory's size that TPL runs. It initializes the DDR through SPD code, and copys final uboot image to DDR. So there are three stage uboot images: * spl_boot, * tpl_boot, * final uboot image Signed-off-by: Ying Zhang <b40530@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 07:16:15 +00:00
ifeq ($(CONFIG_TPL_BUILD),y)
SPL_BIN := u-boot-tpl
Makefile: Build a separate .dtb for TPL At present both SPL and TPL use the same devicetree binary. While there is logic to run fdtgrep separately on each one, it does not actually happen. Add a new TPL rule and use that instead. Make this rule conditional on there actually being a TPL. Do the same for SPL for consistency. Note that the SPL and TPL dtbs are build by a Makefule rule used for U-Boot proper. This is the 'dtbs' target in dts/Makefile. So the check for CONFIG_TPL_BUILD in cmd_fdtgrep never actually works at present. We don't support CONFIG_OF_EMBED for TPL at present. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:13 +00:00
SPL_NAME := tpl
TPL : introduce the TPL based on the SPL Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can not be more than 4K. So, the SPL cannot initialize the DDR with the SPD code. This patch introduces TPL to enable a loader stub that is loaded by the code from the SPL. It initializes the DDR with the SPD or other operations. The TPL's size is sizeable, the maximum size is decided by the memory's size that TPL runs. It initializes the DDR through SPD code, and copys final uboot image to DDR. So there are three stage uboot images: * spl_boot, * tpl_boot, * final uboot image Signed-off-by: Ying Zhang <b40530@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 07:16:15 +00:00
else
SPL_BIN := u-boot-spl
Makefile: Build a separate .dtb for TPL At present both SPL and TPL use the same devicetree binary. While there is logic to run fdtgrep separately on each one, it does not actually happen. Add a new TPL rule and use that instead. Make this rule conditional on there actually being a TPL. Do the same for SPL for consistency. Note that the SPL and TPL dtbs are build by a Makefule rule used for U-Boot proper. This is the 'dtbs' target in dts/Makefile. So the check for CONFIG_TPL_BUILD in cmd_fdtgrep never actually works at present. We don't support CONFIG_OF_EMBED for TPL at present. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:13 +00:00
SPL_NAME := spl
TPL : introduce the TPL based on the SPL Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can not be more than 4K. So, the SPL cannot initialize the DDR with the SPD code. This patch introduces TPL to enable a loader stub that is loaded by the code from the SPL. It initializes the DDR with the SPD or other operations. The TPL's size is sizeable, the maximum size is decided by the memory's size that TPL runs. It initializes the DDR through SPD code, and copys final uboot image to DDR. So there are three stage uboot images: * spl_boot, * tpl_boot, * final uboot image Signed-off-by: Ying Zhang <b40530@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 07:16:15 +00:00
endif
Makefile: Tidy up SPL dtb production Use the SPL_NAME variable to simplify the rules. Drop the SPL targets clean-files since the SPL and TPL dts/ directories are removed by existing rules. Move the SPL rules into a new spl_dtbs to avoid the complicated $(if) construct. Also drop unused pieces from the 'targets' variable. With this, SPL and TPL have separate dtbs which respect the various u-boot,dm-spl / u-boot,dm-tpl tags. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:15 +00:00
export SPL_NAME
spl: Makefile: Define SPL_ earlier This Makefile variable can be used in the architecture's main Makefile but at present it is not set up until later. Set it just before this Makefile is included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:28 +00:00
ifdef CONFIG_SPL_BUILD
SPL_ := SPL_
Makefile: Provide an option to select SPL or TPL At present we have SPL_ which can be used in Makefiles to select between normal and SPL CONFIGs like this: obj-$(CONFIG_$(SPL_)DM) += core/ When TPL is being built, SPL_ has the value 'SPL' which is generally a good idea since they tend to follow each other. But in extreme situations we may want to distinugish between SPL and TPL. For example we may not want to enable CONFIG_DM with TPL. Add a new SPL_TPL_ variable which is set to either empty (for U-Boot proper), 'SPL' or 'TPL'. This may prove useful with TPL-specific options. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-02 15:50:30 +00:00
ifeq ($(CONFIG_TPL_BUILD),y)
SPL_TPL_ := TPL_
else
SPL_TPL_ := SPL_
endif
spl: Makefile: Define SPL_ earlier This Makefile variable can be used in the architecture's main Makefile but at present it is not set up until later. Set it just before this Makefile is included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:28 +00:00
else
SPL_ :=
Makefile: Provide an option to select SPL or TPL At present we have SPL_ which can be used in Makefiles to select between normal and SPL CONFIGs like this: obj-$(CONFIG_$(SPL_)DM) += core/ When TPL is being built, SPL_ has the value 'SPL' which is generally a good idea since they tend to follow each other. But in extreme situations we may want to distinugish between SPL and TPL. For example we may not want to enable CONFIG_DM with TPL. Add a new SPL_TPL_ variable which is set to either empty (for U-Boot proper), 'SPL' or 'TPL'. This may prove useful with TPL-specific options. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-02 15:50:30 +00:00
SPL_TPL_ :=
spl: Makefile: Define SPL_ earlier This Makefile variable can be used in the architecture's main Makefile but at present it is not set up until later. Set it just before this Makefile is included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:28 +00:00
endif
Makefile: Add a warning if SPL/TPL cannot be built At present the build fails in strange ways if CONFIG_SPL is defined by CONFIG_SUPPORT_SPL is not. Add a warning for this case as it can be very confusing to debug. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:11 +00:00
ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
$(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)
endif
ifeq ($(obj)$(CONFIG_SUPPORT_TPL),tpl)
$(error You cannot build TPL without enabling CONFIG_SUPPORT_TPL)
endif
kbuild: rename TOPDIR to stctree Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:19 +00:00
include $(srctree)/config.mk
Kbuild: introduce Makefile in arch/$ARCH/ Introduce a Makefile under arch/$ARCH/ and include it in the top Makefile (similar to Linux kernel). This allows further refactoringi like moving architecture-specific code out of global makefiles, deprecating config variables (CPU, CPUDIR, SOC) or deprecating arch/$ARCH/config.mk. In contrary to Linux kernel, U-Boot defines the ARCH variable by Kconfig, thus the arch Makefile can only included conditionally after the top config.mk. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-21 22:51:33 +00:00
include $(srctree)/arch/$(ARCH)/Makefile
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED With commit 9bd76b807636 ("spl: make CONFIG_OF_EMBED pass dts through fdtgrep"), CONFIG_SPL_MULTI_DTB_FIT has been broken because cmd_fdtgrep was now unknown in scripts/Makefile.spl after moving it to dts/Makefile. This bug has been introduced with v2018.01. This patch moves cmd_fdtgrep from dts/Makefile to scripts/Makefile.lib and includes scripts/Makefile.lib in scripts/Makefile.spl. Fixes: 9bd76b807636 ("spl: make CONFIG_OF_EMBED pass dts through fdtgrep") Reported-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-02-14 05:44:36 +00:00
include $(srctree)/scripts/Makefile.lib
kbuild: improve Kbuild speed Kbuild brought about many advantages for us but a significant performance regression was reported by Simon Glass. After some discussions and analysis, it turned out its main cause is in $(call cc-option,...). Historically, U-Boot parses all config.mk (arch/*/config.mk and board/*/config.mk) every time descending into subdirectories. That means cc-options are evaluated over and over again. $(call cc-option,...) is useful but costly. So we want to evaluate them only in ./Makefile and spl/Makefile and export compiler flags. This commit changes the build system as follows: - Modify scripts/Makefile.build to not include config.mk Instead, add $(PLATFORM_CPPFLAGS) to asflags-y, ccflags-y, cppflags-y. - Export many variables Going forward, Kbuild will not parse config.mk files when it descends into subdirectories. If we want to set variables in config.mk and use them in subdirectories, they must be exported. This is the list of variables to get exported: PLATFORM_CPPFLAGS CPUDIR BOARDDIR OBJCOPYFLAGS LDFLAGS LDFLAGS_FINAL (used in nand_spl/board/*/*/Makefile) CONFIG_STANDALONE_LOAD_ADDR (used in examples/standalone/Makefile) SYM_PREFIX (used in examples/standalone/Makefile) RELFLAGS (used in examples/standalone/Makefile) - Delete CPPFLAGS This variable has been replaced with PLATFORM_CPPFLAGS - Copy gcclibdir from example/standalone/Makefile to arch/sparc/config.mk The reference in CONFIG_STANDALONE_LOAD_ADDR must be resolved before it is exported. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reported-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [on Sandbox] Tested-by: Stephen Warren <swarren@nvidia.com> [on Tegra]
2014-03-05 07:59:40 +00:00
# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
LDFLAGS_FINAL += --gc-sections
Add support for stack-protector Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-11 09:21:58 +00:00
ifeq ($(CONFIG_$(SPL_TPL_)STACKPROTECTOR),y)
KBUILD_CFLAGS += -fstack-protector-strong
else
KBUILD_CFLAGS += -fno-stack-protector
endif
kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary Before this commit, {spl,tpl}-autoconf.mk was always generated at the top Makefile even if SPL(TPL) build was not selected. This commit moves the build rule of {spl,tpl}-autoconf.mk from the top Makefile to spl/Makefile. It prevents unnecessary {spl,tpl}-autoconf.mk from being generated. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:33 +00:00
# FIX ME
kbuild: improve Kbuild speed Kbuild brought about many advantages for us but a significant performance regression was reported by Simon Glass. After some discussions and analysis, it turned out its main cause is in $(call cc-option,...). Historically, U-Boot parses all config.mk (arch/*/config.mk and board/*/config.mk) every time descending into subdirectories. That means cc-options are evaluated over and over again. $(call cc-option,...) is useful but costly. So we want to evaluate them only in ./Makefile and spl/Makefile and export compiler flags. This commit changes the build system as follows: - Modify scripts/Makefile.build to not include config.mk Instead, add $(PLATFORM_CPPFLAGS) to asflags-y, ccflags-y, cppflags-y. - Export many variables Going forward, Kbuild will not parse config.mk files when it descends into subdirectories. If we want to set variables in config.mk and use them in subdirectories, they must be exported. This is the list of variables to get exported: PLATFORM_CPPFLAGS CPUDIR BOARDDIR OBJCOPYFLAGS LDFLAGS LDFLAGS_FINAL (used in nand_spl/board/*/*/Makefile) CONFIG_STANDALONE_LOAD_ADDR (used in examples/standalone/Makefile) SYM_PREFIX (used in examples/standalone/Makefile) RELFLAGS (used in examples/standalone/Makefile) - Delete CPPFLAGS This variable has been replaced with PLATFORM_CPPFLAGS - Copy gcclibdir from example/standalone/Makefile to arch/sparc/config.mk The reference in CONFIG_STANDALONE_LOAD_ADDR must be resolved before it is exported. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reported-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [on Sandbox] Tested-by: Stephen Warren <swarren@nvidia.com> [on Tegra]
2014-03-05 07:59:40 +00:00
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
$(NOSTDINC_FLAGS)
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary Before this commit, {spl,tpl}-autoconf.mk was always generated at the top Makefile even if SPL(TPL) build was not selected. This commit moves the build rule of {spl,tpl}-autoconf.mk from the top Makefile to spl/Makefile. It prevents unnecessary {spl,tpl}-autoconf.mk from being generated. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:33 +00:00
kbuild: rename SRCTREE to srctree Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used for instead. This commit renames SRCTREE to srctree and deletes the defition of SRCTREE. Note that SRCTREE in scripts/kernel-doc, scripts/docproc.c, doc/DocBook/Makefile should be keep. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:20 +00:00
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
kbuild: allow null board for spl build Commit 33a02da0 supported "<none>" for the board field of boards.cfg. But it missed to modify spl/Makefile. This commit provides the flexibility so we can use "<none>" board in SPL too.
2014-04-25 12:54:31 +00:00
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
spl: separate SPL_FRAMEWORK config for spl and tpl Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all cases, making the TPL bigger. There may be cases where the TPL is really size constrained due to its underlying ram size. Therefore introduce a new TPL_FRAMEWORK option and make the relevant conditionals check for both. The default is set to "y if SPL_FRAMEWORK" to mimic the previous behaviour where the TPL would always get the SPL framework if it was enabled in SPL. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-16 08:12:02 +00:00
ifeq ($(CONFIG_TPL_BUILD),y)
libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
else
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
spl: separate SPL_FRAMEWORK config for spl and tpl Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all cases, making the TPL bigger. There may be cases where the TPL is really size constrained due to its underlying ram size. Therefore introduce a new TPL_FRAMEWORK option and make the relevant conditionals check for both. The default is set to "y if SPL_FRAMEWORK" to mimic the previous behaviour where the TPL would always get the SPL framework if it was enabled in SPL. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-16 08:12:02 +00:00
endif
Move board_init_f_mem() into a common location This function will be used by both SPL and U-Boot proper. So move it into a common place. Also change the #ifdef so that the early malloc() area is not set up in SPL if CONFIG_SYS_SPL_MALLOC_START is defined. In that case it would never actually be used, and just chews up stack space. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-19 12:49:56 +00:00
libs-y += common/init/
Use separate options for TPL support At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:25 +00:00
# Special handling for a few options which support SPL/TPL
ifeq ($(CONFIG_TPL_BUILD),y)
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
Use separate options for TPL support At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:25 +00:00
libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
else
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
Use separate options for TPL support At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:25 +00:00
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
blk: Rework guard around part_init call The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05 13:23:38 +00:00
ifdef CONFIG_SPL_FRAMEWORK
libs-$(CONFIG_PARTITIONS) += disk/
endif
Use separate options for TPL support At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:25 +00:00
endif
spl: move SPL driver entries to driver/Makefile Just preparing for upcoming cleaning. The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:44 +00:00
libs-y += drivers/
Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET The SPL option for USB gadget should be named after the option for u-boot (CONFIG_USB_GADGET) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 14:44:13 +00:00
libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/dwc3/
usb: Add Cadence USB3 host and gadget driver Add support for USB3 host and gadget driver. This is a direct sync of Linux kernel Cadence USB stack that from v5.4-rc1 release. Driver has been modified so that it compiles without errors against U-Boot code base. Features not required for U-Boot such as scatter-gather DMA and OTG interrupt handling has been dropped. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [jjhiblot@ti.com: Add PHY support] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-10-01 11:56:33 +00:00
libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
spl: Add support for CONFIG_OF_EMBED=y CONFIG_OF_EMBED=y is the option which is here only for testing purpose and shouldn't be enabled by default as is describe at: "dts: Add a comment about CONFIG_OF_EMBED being for local use" (sha1: 3d3f60cb7a6bb6c338e00a9769fa918a8536096c) But still enabling this option locally shouldn't end up with compilation error when you build SPL. This patch fix it. Compilation error: lib/built-in.o: In function `fdtdec_setup': /mnt/disk/u-boot/lib/fdtdec.c:1246: undefined reference to `__dtb_dt_begin' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-09 09:45:07 +00:00
libs-y += dts/
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
libs-y += fs/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
net: Rename SPL_NET_SUPPORT to SPL_NET Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:30 +00:00
libs-$(CONFIG_SPL_NET) += net/
dm: test: Build tests for SPL We want to run unit tests in SPL. Add a new Kconfig to control this and enable it for sandbox_spl Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-26 02:38:26 +00:00
libs-$(CONFIG_SPL_UNIT_TEST) += test/
spl: Add support for common libraries and drivers Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-13 05:11:08 +00:00
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
head-y := $(addprefix $(obj)/,$(head-y))
libs-y := $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
Makefile: rename all libraries to built-in.o Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-11 05:36:00 +00:00
spl: fix SPL build of private libgcc This fixes the SPL build to link with the SPL version of libgcc if USE_PRIVATE_LIBGCC is set to "yes". Previously it was linking with the libgcc from the normal u-boot build because it gets set in PLATFORM_LIBS and passed down the to the SPL build. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:14 +00:00
# Add GCC lib
kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC Before this commit, USE_PRIVATE_LIBGCC was defined in arch-specific config.mk and referenced in arch/$(ARCH)/lib/Makefile. We are not happy about parsing config.mk again and again. We have to keep the same behavior with a different way. By adding "CONFIG_" prefix, this macro appears in include/autoconf.mk, include/spl-autoconf.mk. (And treating USE_PRIVATE_LIBGCC as CONFIG macro is reasonable enough.) Tegra SoC family defined USE_PRIVATE_LIBGCC as "yes" in arch/arm/cpu/arm720t/tegra*/config.mk, whereas did not define it in arch/arm/cpu/armv7/tegra*/config.mk. It means Tegra enables PRIVATE_LIBGCC only for SPL. We can describe the same behavior by adding #ifdef CONFIG_SPL_BUILD # define CONFIG_USE_PRIVATE_LIBGCC #endif to include/configs/tegra-common.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-03-05 07:59:38 +00:00
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
kbuild: consolidate PLATFORM_LIBS We had switched to Kbuild so now we can specify PLATFORM_LIBS/PLATFORM_LIBGCC with relative path. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-02-27 13:40:34 +00:00
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
kbuild: fix SPL link bug when USE_PRIVATE_LIBGCC is "yes" Commit 6825a95 (kbuild: use Linux Kernel build scripts) changed the behavior of linkage when USE_PRIAVATE_LIBGCC is defined as "yes". (It dropped arch/arm/lib/eabi_compat.o from the target library.) Affected boards are all Tegra boards. This commit gets back the same behavior as before Kbuild series. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
2014-02-24 11:44:14 +00:00
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
spl: fix SPL build of private libgcc This fixes the SPL build to link with the SPL version of libgcc if USE_PRIVATE_LIBGCC is set to "yes". Previously it was linking with the libgcc from the normal u-boot build because it gets set in PLATFORM_LIBS and passed down the to the SPL build. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-08-31 08:30:14 +00:00
endif
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
u-boot-spl-init := $(head-y)
u-boot-spl-main := $(libs-y)
spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL For the RK3368, we want to use OF_PLATDATA in TPL, but full OF_CONTROL in SPL: this requires the introduction of a new family of configuration options to decouple SPL_OF_CONTROL and SPL_OF_PLATDATA from TPL. Consequently, Makefile.spl needs to be adjusted to test for these configuration items through the $(SPL_TPL_) macro instead of hard-coding the SPL variant. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-29 09:11:21 +00:00
ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
Makefile: Use a variable for generated of-platdata headers There are actually two generated files but only one is currently mentioned in the Makefile as a dependency. Put them both in a Makefile variable and use that instead, to avoid inconsistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:52 +00:00
platdata-hdr := include/generated/dt-structs-gen.h include/generated/dt-decl.h
Makefile: Remove old of-platdata files before regenerating Which files we generate depends on the setting of OF_PLATDATA_INST in the build. This might change between builds, but the build directory may be reused. Leaving old files around is confusing and switching the OF_PLATDATA_INST setting does not necessarily regenerate the files, e.g. if the devicetree has not changed. Remove all the files before regenerating new ones. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:53 +00:00
platdata-inst := $(obj)/dts/dt-uclass.o $(obj)/dts/dt-device.o
platdata-noinst := $(obj)/dts/dt-plat.o
Makefile: Depend only on required of-platdata files When OF_PLATDATA_INST is enabled, we need dt-uclass.c and dt-device.c for the build to work. When OF_PLATDATA_INST is not enabled, we only need dt-plat.c Update the Makefile rules to indicate this. At present all files are generated and compiled regardless of which are actually needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:50 +00:00
ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA_INST
Makefile: Remove old of-platdata files before regenerating Which files we generate depends on the setting of OF_PLATDATA_INST in the build. This might change between builds, but the build directory may be reused. Leaving old files around is confusing and switching the OF_PLATDATA_INST setting does not necessarily regenerate the files, e.g. if the devicetree has not changed. Remove all the files before regenerating new ones. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:53 +00:00
u-boot-spl-platdata := $(platdata-inst)
u-boot-spl-old-platdata := $(platdata-noinst)
Makefile: Depend only on required of-platdata files When OF_PLATDATA_INST is enabled, we need dt-uclass.c and dt-device.c for the build to work. When OF_PLATDATA_INST is not enabled, we only need dt-plat.c Update the Makefile rules to indicate this. At present all files are generated and compiled regardless of which are actually needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:50 +00:00
else
Makefile: Remove old of-platdata files before regenerating Which files we generate depends on the setting of OF_PLATDATA_INST in the build. This might change between builds, but the build directory may be reused. Leaving old files around is confusing and switching the OF_PLATDATA_INST setting does not necessarily regenerate the files, e.g. if the devicetree has not changed. Remove all the files before regenerating new ones. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:53 +00:00
u-boot-spl-platdata := $(platdata-noinst)
u-boot-spl-old-platdata := $(platdata-inst)
Makefile: Depend only on required of-platdata files When OF_PLATDATA_INST is enabled, we need dt-uclass.c and dt-device.c for the build to work. When OF_PLATDATA_INST is not enabled, we only need dt-plat.c Update the Makefile rules to indicate this. At present all files are generated and compiled regardless of which are actually needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:50 +00:00
endif
Makefile: Remove old of-platdata files before regenerating Which files we generate depends on the setting of OF_PLATDATA_INST in the build. This might change between builds, but the build directory may be reused. Leaving old files around is confusing and switching the OF_PLATDATA_INST setting does not necessarily regenerate the files, e.g. if the devicetree has not changed. Remove all the files before regenerating new ones. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:53 +00:00
# Files we need to generate
Makefile: Invoke dtoc only once Update the Makefile to run dtoc only once, generating all required files. This saves time since there is a lot of processing in each invocation of dtoc. We already have a variable for the object files to build, so use that instead of repeating the same filenames. Add a C version of this also, for the same reason. This makes it easier to add new C files (generated by dtoc) to the build later, as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-29 03:34:53 +00:00
u-boot-spl-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-platdata))
Makefile: Remove old of-platdata files before regenerating Which files we generate depends on the setting of OF_PLATDATA_INST in the build. This might change between builds, but the build directory may be reused. Leaving old files around is confusing and switching the OF_PLATDATA_INST setting does not necessarily regenerate the files, e.g. if the devicetree has not changed. Remove all the files before regenerating new ones. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:53 +00:00
# Files we won't generate and should remove
u-boot-spl-old-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-old-platdata))
Makefile: Use a variable for generated of-platdata headers There are actually two generated files but only one is currently mentioned in the Makefile as a dependency. Put them both in a Makefile variable and use that instead, to avoid inconsistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:52 +00:00
endif # OF_PLATDATA
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
# Linker Script
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
# First test whether there's a linker-script for the specific stage defined...
ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
# need to strip off double quotes
spl: allow a separate TEXT_BASE, LDSCRIPT and MAX_SIZE for TPL For the bringup of the RK3368, we need to support TPL and SPL running from different addresses... which requires both stages to use a distinct TEXT_BASE. This commit adds support for having a separate LDSCRIPT for TPL (which is expected to make use of the TPL_MAX_SIZE define) and for having a the option of defining TPL_TEXT_BASE and having the TPL stage linked against this address. Note that the handling of the TEXT_BASE is designed to not interfere with the previous assumption that SPL_TEXT_BASE should be used for TPL as well, unless TPL_TEXT_BASE is defined. For this reason, the test in Makefile.spl uses the following (seemingly redundant checks): 1. looks for $(SPL_TPL_)TEXT_BASE 2. looks for SPL_TEXT_BASE (even when building in TPL) Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-04 12:47:46 +00:00
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
else
# ...then fall back to the generic SPL linker-script
ifneq ($(CONFIG_SPL_LDSCRIPT),)
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
endif
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
endif
ifeq ($(wildcard $(LDSCRIPT)),)
kbuild: rename TOPDIR to stctree Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:19 +00:00
LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
endif
ifeq ($(wildcard $(LDSCRIPT)),)
kbuild: rename TOPDIR to stctree Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:19 +00:00
LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
endif
Allow arch directory to contain .lds without requiring Makefile The Makefile for a CPU is in arch/($ARCH)/cpu/$(CPU). We want to support having an .lds file in arch/$(ARCH)/cpu without requiring an additional Makefile there. This change makes it clear that we expect a Makefile in the same directory as the link script except in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-11-21 10:49:37 +00:00
ifeq ($(wildcard $(LDSCRIPT)),)
kbuild: rename TOPDIR to stctree Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:19 +00:00
LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
Allow arch directory to contain .lds without requiring Makefile The Makefile for a CPU is in arch/($ARCH)/cpu/$(CPU). We want to support having an .lds file in arch/$(ARCH)/cpu without requiring an additional Makefile there. This change makes it clear that we expect a Makefile in the same directory as the link script except in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-11-21 10:49:37 +00:00
endif
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif
# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
kbuild: rename TOPDIR to stctree Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:19 +00:00
-include $(srctree)/include/u-boot/u-boot.lds.h \
kbuild: rename OBJTREE to objtree Prior to Kbuild, $(OBJTREE) was used for pointing to the top of build directory with absolute path. In Kbuild style, $(objtree) is used instead. This commit renames OBJTREE to objtree and delete the defition of OBJTREE. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:21 +00:00
-include $(objtree)/include/config.h \
Define CPUDIR for the .lds link script Most link scripts differ only in the directory containing the start.o file. Make this a #define to remove this last difference. (Note that if start.o were disallowed outside the CPU start directory then we wouldn't even need this. But that is a separate discussion.) Signed-off-by: Simon Glass <sjg@chromium.org>
2011-11-21 10:49:40 +00:00
-DCPUDIR=$(CPUDIR) \
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
linker: Modify linker scripts to be more generic Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE. This lets us re-use the same script for both SPL and TPL. Add logic to scripts/Makefile.spl to pass in the right value when preprocessing the script. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-22 22:09:26 +00:00
# Turn various CONFIG symbols into IMAGE symbols for easy reuse of
# the scripts between SPL and TPL.
ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),)
LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE)
endif
ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE)
endif
Makefile: preserve output for images that can contain HAB Blocks To being able to sign created binaries, we need to know the HAB Blocks for that image. Especially for the imximage type the HAB Blocks are only available during creation of the image. We want to preserve the information until we get to sign the files. In the verbose case we still get them printed out instead of writing to log files. Cc: sbabic@denx.de v2-Changes: - No usage of MKIMAGEOUTPUT_$(@F) macro. - Predefine default value /dev/null in every involved Makefile. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
2016-11-06 15:37:58 +00:00
MKIMAGEOUTPUT ?= /dev/null
kbuild: Rename UIMAGE to MKIMAGE U-Boot uses the 'mkimage' tool to produce various image types, not only uImage image type. Rename the invocation name from UIMAGE to MKIMAGE. The following command was used to do the replacement: git grep 'quiet_cmd_mkimage.* = UIMAGE' | cut -d : -f 1 | \ xargs -i sed -i "s@\(quiet_cmd_mkimage\)\(.*\) = UIMAGE @\1\2 = MKIMAGE@" {} Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-14 04:00:14 +00:00
quiet_cmd_mkimage = MKIMAGE $@
kbuild: use shorten logs for mkimage rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:15 +00:00
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
Makefile: always preserve output for images that can contain HAB Blocks The current makefile logic disables creation of the SPL.log/u-boot-ivt.img.log etc. files when V=1 is given on the command line, the rationale presumably being that the user wants and gets the information on the console. However, from general principles, I don't think a higher V= level should affect which build artifacts get generated (and certainly shouldn't produce fewer). Concretely, it's also a problem that when doing a V=1 build in a terminal, the relevant HAB blocks lines easily drown in all the other V=1 output. Moreover, build systems such as Yocto by default pass V=1, so in that case the information gets hidden away in the do_compile log file, making it nigh impossible to create a recipe for creating signed U-boot images - I don't want to disable V=1, because having verbose output in the log file is valuable when things go wrong, but OTOH trying to go digging in the do_compile log file (and getting exactly the right lines) is not pleasant to even think about. So change the logic so that for V=0, the mkimage output is redirected to MKIMAGEOUTPUT (which is also the current behaviour), while for any other value of V, we _additionally_ write the information to make's stdout, whatever that might be. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Tested-by: Breno Lima <breno.lima@nxp.com>
2018-03-23 11:08:02 +00:00
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
omapimage: Add support for byteswapped SPI images Add MLO.byteswap as a target to spl/Makefile and un-guard the first MLO rule so we don't have to duplicate it. Signed-off-by: Tom Rini <trini@ti.com>
2012-10-16 13:06:06 +00:00
armv8: K3: am654: Add support for generating build targets Update Makefile to generate - tispl.bin: First stage bootloader on ARMv8 core - u-boot.img: Second stage bootloader on ARMv8 core. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:27:15 +00:00
quiet_cmd_mkfitimage = MKIMAGE $@
cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(SPL_ITS) -E $@ \
$(if $(KBUILD_VERBOSE:1=), MKIMAGEOUTPUT)
kbuild: use shorten logs for mkimage rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:15 +00:00
MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
kbuild: add missing FORCE where $(call if_changed, ) is used FORCE is needed for $(call if_changed,...) to be evaluated every time. Otherwise, the command is not executed when the command line has changed but any prerequisite has not been updated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05 08:55:13 +00:00
MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
kbuild: use shorten logs for mkimage rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:15 +00:00
$(call if_changed,mkimage)
mkimage: Add OMAP boot image support - Add mkimage support for OMAP boot image - Add support for OMAP boot image(MLO) generation in the new SPL framework Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-07-21 13:10:30 +00:00
ARM: zynq: Add target for building bootable SPL image for Zynq Add a build target to generate 'boot.bin' which includes SPL. This is used by the platforms BootROM to load SPL directly. This change also conditionally changes what the 'boot.bin' target generates depending on the SoC. Leaving the behaviour unchanged for the AT91 targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-17 12:56:57 +00:00
ifeq ($(CONFIG_SYS_SOC),"at91")
arm:at91: enable ROM loadable atmel image For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Bo Shen <voice.shen@atmel.com>
2014-05-19 12:23:40 +00:00
MKIMAGEFLAGS_boot.bin = -T atmelimage
ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
Makefile.spl: Move generated AT91SAM NAND image boot.bin to spl directory This patch moves the AT91SAM NAND booting SPL image "boot.bin" which includes the ECC values from the root directory into the spl directory, where all SPL related images are located. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de> Tested on the taurus board: Tested-by: Heiko Schocher <hs@denx.de>
2019-04-02 08:57:23 +00:00
$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
arm:at91: enable ROM loadable atmel image For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Bo Shen <voice.shen@atmel.com>
2014-05-19 12:23:40 +00:00
endif
Makefile.spl: Move generated AT91SAM NAND image boot.bin to spl directory This patch moves the AT91SAM NAND booting SPL image "boot.bin" which includes the ECC values from the root directory into the spl directory, where all SPL related images are located. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de> Tested on the taurus board: Tested-by: Heiko Schocher <hs@denx.de>
2019-04-02 08:57:23 +00:00
$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
arm:at91: enable ROM loadable atmel image For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Bo Shen <voice.shen@atmel.com>
2014-05-19 12:23:40 +00:00
$(call if_changed,mkimage)
ARM: zynq: Add target for building bootable SPL image for Zynq Add a build target to generate 'boot.bin' which includes SPL. This is used by the platforms BootROM to load SPL directly. This change also conditionally changes what the 'boot.bin' target generates depending on the SoC. Leaving the behaviour unchanged for the AT91 targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-17 12:56:57 +00:00
else
tools: zynqmpimage: Add Xilinx ZynqMP boot header generation Add support for the zynqmpimage to mkimage. Only basic functionality is supported without encryption and register initialization with one partition which is filled by U-Boot SPL. For more detail information look at Xilinx ZynqMP TRM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-27 12:03:29 +00:00
ifdef CONFIG_ARCH_ZYNQ
tools: mkimage: Add support for initialization table for Zynq and ZynqMP The Zynq/ZynqMP boot.bin file contains a region for register initialization data. Filling in proper values in this table can reduce boot time (e.g. about 50ms faster on QSPI boot) and also reduce the size of the SPL binary. The table is a simple text file with register+data on each line. Other lines are simply skipped. The file can be passed to mkimage using the "-R" parameter. It is recommended to add reg init file to board folder. For example: CONFIG_BOOT_INIT_FILE="board/xilinx/zynqmp/xilinx_zynqmp_zcu102/reg.int Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-20 09:37:24 +00:00
MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
tools: zynqmpimage: Add Xilinx ZynqMP boot header generation Add support for the zynqmpimage to mkimage. Only basic functionality is supported without encryption and register initialization with one partition which is filled by U-Boot SPL. For more detail information look at Xilinx ZynqMP TRM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-27 12:03:29 +00:00
endif
ifdef CONFIG_ARCH_ZYNQMP
arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE The value of PMUFW_INIT_FILE is prefixed with "$(srctree)/", thus forcing it to be a relative path inside the U-Boot source tree. Since the PMUFW is a binary file generated outside of U-Boot, the PMUFW binary must be copied inside the U-Boot source tree before the build. This generates a few problems: * if the source tree is shared among different out-of-tree builds, they will pollute (and potentially corrupt) each other * the source tree cannot be read-only * any buildsystem must add a command to copy the PMUFW binary * putting an externally-generated binary in the source tree is ugly as hell Avoid these problems by accepting an absolute path for PMUFW_INIT_FILE. This would be as simple as removing the "$(srctree)/" prefix, but in order to keep backward compatibility we rather use the shell and readlink to get the absolute path even when starting from a relative path. Since 'readlink -f' produces an empty string if the file does not exist, we also add a check to ensure the file configured in PMUFW_INIT_FILE exists. Otherwise the build would exit successfully, but produce a boot.bin without PMUFW as if PMUFW_INIT_FILE were empty. Tested in the 12 possible combinations of: - PMUFW_INIT_FILE empty, relative, absolute, non-existing - building in-tree, in subdir, in other directory Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Cc: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-04 10:21:01 +00:00
ifneq ($(CONFIG_PMUFW_INIT_FILE),"")
spl/boot.bin: zynqmp-check-pmufw
zynqmp-check-pmufw: FORCE
( cd $(srctree) && test -r $(CONFIG_PMUFW_INIT_FILE) ) \
|| ( echo "Cannot read $(CONFIG_PMUFW_INIT_FILE)" && false )
endif
tools: mkimage: Extend mkimage to also include pmufw The patch is adding external pmufw "Platform Management Unit firmware" to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable to read and boot the system. pmufw is copied to the header data section follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze) and SPL runs on a53-0. This is generated command line when PMUFW_INIT_FILE is setup. ./tools/mkimage -T zynqmpimage -R ./"" -n ./"board/xilinx/zynqmp/pmufw.bin" -d spl/u-boot-spl.bin spl/boot.bin Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-21 10:58:17 +00:00
MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \
arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE The value of PMUFW_INIT_FILE is prefixed with "$(srctree)/", thus forcing it to be a relative path inside the U-Boot source tree. Since the PMUFW is a binary file generated outside of U-Boot, the PMUFW binary must be copied inside the U-Boot source tree before the build. This generates a few problems: * if the source tree is shared among different out-of-tree builds, they will pollute (and potentially corrupt) each other * the source tree cannot be read-only * any buildsystem must add a command to copy the PMUFW binary * putting an externally-generated binary in the source tree is ugly as hell Avoid these problems by accepting an absolute path for PMUFW_INIT_FILE. This would be as simple as removing the "$(srctree)/" prefix, but in order to keep backward compatibility we rather use the shell and readlink to get the absolute path even when starting from a relative path. Since 'readlink -f' produces an empty string if the file does not exist, we also add a check to ensure the file configured in PMUFW_INIT_FILE exists. Otherwise the build would exit successfully, but produce a boot.bin without PMUFW as if PMUFW_INIT_FILE were empty. Tested in the 12 possible combinations of: - PMUFW_INIT_FILE empty, relative, absolute, non-existing - building in-tree, in subdir, in other directory Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Cc: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-04 10:21:01 +00:00
-n "$(shell cd $(srctree); readlink -f $(CONFIG_PMUFW_INIT_FILE))"
tools: zynqmpimage: Add Xilinx ZynqMP boot header generation Add support for the zynqmpimage to mkimage. Only basic functionality is supported without encryption and register initialization with one partition which is filled by U-Boot SPL. For more detail information look at Xilinx ZynqMP TRM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-27 12:03:29 +00:00
endif
ARM: zynq: Add target for building bootable SPL image for Zynq Add a build target to generate 'boot.bin' which includes SPL. This is used by the platforms BootROM to load SPL directly. This change also conditionally changes what the 'boot.bin' target generates depending on the SoC. Leaving the behaviour unchanged for the AT91 targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-17 12:56:57 +00:00
arm64: zynqmp: Align u-boot-spl.bin for boot.bin creation Bootrom is not capable to work with non align bootloader partition that's why it is necessary to align it before boot.bin creation. The patch is creating new spl/u-boot-spl-align.bin which is used only for boot.bin. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16 11:14:00 +00:00
$(obj)/$(SPL_BIN)-align.bin: $(obj)/$(SPL_BIN).bin
@dd if=$< of=$@ conv=block,sync bs=4 2>/dev/null;
spl/boot.bin: $(obj)/$(SPL_BIN)-align.bin FORCE
ARM: zynq: Add target for building bootable SPL image for Zynq Add a build target to generate 'boot.bin' which includes SPL. This is used by the platforms BootROM to load SPL directly. This change also conditionally changes what the 'boot.bin' target generates depending on the SoC. Leaving the behaviour unchanged for the AT91 targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-17 12:56:57 +00:00
$(call if_changed,mkimage)
endif
arm:at91: enable ROM loadable atmel image For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Bo Shen <voice.shen@atmel.com>
2014-05-19 12:23:40 +00:00
Makefile: Generate a symbol file for u-boot-spl Add a rule to generate u-boot-spl.sym so that pytest can discover the available unit tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-26 02:38:30 +00:00
INPUTS-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).sym
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
ORIGEN: Add MMC SPL support Adds mmc boot support. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-08-18 22:37:20 +00:00
ifdef CONFIG_SAMSUNG
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-y += $(obj)/$(BOARD)-spl.bin
ORIGEN: Add MMC SPL support Adds mmc boot support. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-08-18 22:37:20 +00:00
endif
ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices The sfp file is only valid for Gen5 (Cyclone5 & Arria5) and Arria10 devices. The file should only be built for these devices. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
2019-03-20 20:15:21 +00:00
ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-y += $(obj)/$(SPL_BIN).sfp
Makefile: Add target for building bootable SPL image for SoCFPGA Add build target for generating boot partition images recognised by the SoCFPGA BootROM. The SoCFPGA BootROM expects four copies of the u-boot-spl-dtb.sfp at the beginning of boot partition. Those are u-boot-spl-dtb.bin augmented by a header with which the BootROM can work. The u-boot-dtb.img uImage is appended to this to produce a full boot partition image, the u-boot-with-spl-dtb.sfp . This is the name of the final target. Signed-off-by: Marek Vasut <marex@denx.de>
2015-07-15 00:53:45 +00:00
endif
Makefile: socfpga: Add target to generate hex output for combined spl and dtb Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream for Intel SOCFPGA SOC64 devices. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-01 12:04:16 +00:00
INPUTS-$(CONFIG_TARGET_SOCFPGA_SOC64) += $(obj)/u-boot-spl-dtb.hex
sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXI CONFIG_SUNXI -> CONFIG_ARCH_SUNXI and removed CONFIG_SUNIX from config_whitelist.txt Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-13 08:49:35 +00:00
ifdef CONFIG_ARCH_SUNXI
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-y += $(obj)/sunxi-spl.bin
scripts: sunxi: Build an raw SPL image Introduce a new sunxi-spl-with-ecc.bin image with already the right header, ECC, randomizer and padding for the BROM to be able to read it. It needs to be flashed using a raw access to the NAND so that the controller doesn't change a thing to it, since we already have all the right parameters. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-02-27 17:22:13 +00:00
ifdef CONFIG_NAND_SUNXI
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-y += $(obj)/sunxi-spl-with-ecc.bin
scripts: sunxi: Build an raw SPL image Introduce a new sunxi-spl-with-ecc.bin image with already the right header, ECC, randomizer and padding for the BROM to be able to read it. It needs to be flashed using a raw access to the NAND so that the controller doesn't change a thing to it, since we already have all the right parameters. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-02-27 17:22:13 +00:00
endif
sunxi: non-FEL SPL boot support for sun7i Add support for booting from an MMC card. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
2014-05-05 10:52:30 +00:00
endif
arm, at91: generate boot.bin file for all atmel SoC generate the boot.bin file for all atmel SoC (arm920, arm926, armv7) Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [fix subject] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-30 08:59:59 +00:00
ifeq ($(CONFIG_SYS_SOC),"at91")
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-y += $(obj)/boot.bin
arm, at91: generate boot.bin file for all atmel SoC generate the boot.bin file for all atmel SoC (arm920, arm926, armv7) Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [fix subject] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-30 08:59:59 +00:00
endif
x86: Allow 16-bit init to be in TPL At present we support having 16-bit init be in SPL or U-Boot proper, but not TPL. Add support for this so that TPL can boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:53 +00:00
ifdef CONFIG_TPL_BUILD
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
binman: x86: Separate out 16-bit reset and init code At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-24 13:22:49 +00:00
$(obj)/u-boot-x86-reset16-tpl.bin
x86: Allow 16-bit init to be in TPL At present we support having 16-bit init be in SPL or U-Boot proper, but not TPL. Add support for this so that TPL can boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:53 +00:00
else
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
binman: x86: Separate out 16-bit reset and init code At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-24 13:22:49 +00:00
$(obj)/u-boot-x86-reset16-spl.bin
x86: Allow 16-bit init to be in TPL At present we support having 16-bit init be in SPL or U-Boot proper, but not TPL. Add support for this so that TPL can boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:53 +00:00
endif
x86: Add SPL build rules for start-up code When SPL is used we need to build the 16-bit start-up code. Add Makefile rules to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:04:03 +00:00
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin
INPUTS-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
tools: zynqmpimage: Add Xilinx ZynqMP boot header generation Add support for the zynqmpimage to mkimage. Only basic functionality is supported without encryption and register initialization with one partition which is filled by U-Boot SPL. For more detail information look at Xilinx ZynqMP TRM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-27 12:03:29 +00:00
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
INPUTS-$(CONFIG_ARCH_MEDIATEK) += $(obj)/u-boot-spl-mtk.bin
tools: MediaTek: add MTK boot header generation to mkimage This patch adds support for MTK boot image generation. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:49 +00:00
Makefile: Rename ALL-y to INPUTS-y When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-19 19:56:01 +00:00
all: $(INPUTS-y)
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
dm: Reduce SPL device tree size The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:29 +00:00
quiet_cmd_cat = CAT $@
cmd_cat = cat $(filter-out $(PHONY), $^) > $@
fdt: Build an SPL binary without device tree At present u-boot-spl.bin holds the plain SPL binary without the device tree. This is somewhat annoying since you need either u-boot-spl.bin or u-boot-spl-dtb.bin depending on whether device tree is used. Adjust the build such that u-boot-spl.bin includes a device tree (if enabled), and the plain binary is in u-boot-spl-nodtb.bin. For now u-boot-spl-dtb.bin remains the same. Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 01:10:51 +00:00
quiet_cmd_copy = COPY $@
cmd_copy = cp $< $@
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
ifneq ($(CONFIG_SPL_MULTI_DTB_FIT),y)
FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).dtb
else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_LZO),y)
FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.lzo
else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_GZIP),y)
FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.gz
else
FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit
endif
spl: Allow sandbox to build a device-tree file At present only OF_SEPARATE is considered valid for building a device-tree file in SPL. However sandbox uses OF_HOSTFILE instead. Update the logic to handle this and make it easier to understand. Note that the new logic is not quite the same as the old logic. It was previously assumed that checking for: $(CONFIG_$(SPL_TPL_)OF_CONTROL) $(CONFIG_OF_SEPARATE) $(CONFIG_$(SPL_TPL_)OF_PLATDATA) producing 'yy' meant that the first two were 'y' and the last was empty. Strictly speaking it would be possible for any two of the three to be 'y' and still yield the same result. However, that was not the intention of the new logic, since OF_PLATDATA always ensures that no device-tree file is included. So in effect the new logic is the same, with the addition of OF_HOSTFILE as an option for OP_SEPARATE. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:38 +00:00
# Build the .dtb file if:
# - we are not using OF_PLATDATA
# - we are using OF_CONTROL
# - we have either OF_SEPARATE or OF_HOSTFILE
build_dtb :=
ifeq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA),)
ifneq ($(CONFIG_$(SPL_TPL_)OF_CONTROL),)
ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
build_dtb := y
endif
endif
endif
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
spl: Allow sandbox to build a device-tree file At present only OF_SEPARATE is considered valid for building a device-tree file in SPL. However sandbox uses OF_HOSTFILE instead. Update the logic to handle this and make it easier to understand. Note that the new logic is not quite the same as the old logic. It was previously assumed that checking for: $(CONFIG_$(SPL_TPL_)OF_CONTROL) $(CONFIG_OF_SEPARATE) $(CONFIG_$(SPL_TPL_)OF_PLATDATA) producing 'yy' meant that the first two were 'y' and the last was empty. Strictly speaking it would be possible for any two of the three to be 'y' and still yield the same result. However, that was not the intention of the new logic, since OF_PLATDATA always ensures that no device-tree file is included. So in effect the new logic is the same, with the addition of OF_HOSTFILE as an option for OP_SEPARATE. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:38 +00:00
ifneq ($(build_dtb),)
spl: Don't create a BSS padding when it is separate When BSS does not immediate follow the SPL image we don't need padding before the device tree. Remove it in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:34 +00:00
$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
$(FINAL_DTB_CONTAINER) FORCE
dm: Reduce SPL device tree size The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:29 +00:00
$(call if_changed,cat)
fdt: Build an SPL binary without device tree At present u-boot-spl.bin holds the plain SPL binary without the device tree. This is somewhat annoying since you need either u-boot-spl.bin or u-boot-spl-dtb.bin depending on whether device tree is used. Adjust the build such that u-boot-spl.bin includes a device tree (if enabled), and the plain binary is in u-boot-spl-nodtb.bin. For now u-boot-spl-dtb.bin remains the same. Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 01:10:51 +00:00
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
$(call if_changed,copy)
else
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
$(call if_changed,copy)
endif
# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
dm: Reduce SPL device tree size The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:29 +00:00
$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
Makefile: Build SPL dtbs in the spl/ directory Rather than putting these in the top-level dts/ directory (which is intended for U-Boot proper), put them in the correct subdirectory for SPL (either spl/ or tpl/). This is where other SPL targets are kept, so this is more consistent. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:14 +00:00
$(obj)/$(SPL_BIN).dtb: $(obj)/dts/dt-$(SPL_NAME).dtb FORCE
spl: make CONFIG_OF_EMBED pass dts through fdtgrep Building spl with CONFIG_OF_EMBED enabled results in an error message on my board: "SPL image too big". This is because the fdtgrep build step is only executed for CONFIG_OF_SEPARATE. Fix this by moving the fdtgrep build step ('cmd_fdtgreo') from scripts/Makefile.spl to dts/Makefile so that the reduced dtb is available for all kinds of spl builds. The resulting variable name for the embedded device tree blob changes, too, which is why common.h and fdtdec.c have tiny changes. Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-21 12:29:56 +00:00
$(call if_changed,copy)
dm: Reduce SPL device tree size The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:29 +00:00
pylibfdt: move pylibfdt to scripts/dtc/pylibfdt and refactor makefile The pylibfdt is used by dtoc (and, indirectly by binman), but there is no reason why it must be generated in the tools/ directory. Recently, U-Boot switched over to the bundled DTC, and the directory structure under scripts/dtc/ now mirrors the upstream DTC project. So, scripts/dtc/pylibfdt is the best location. I also rewrote the Makefile in a cleaner Kbuild style. The scripts from the upstream have been moved as follows: lib/libfdt/pylibfdt/setup.py -> scripts/dtc/pylibfdt/setup.py lib/libfdt/pylibfdt/libfdt.i -> scripts/dtc/pylibfdt/libfdt.i_shipped The .i_shipped is coped to .i during building because the .i must be located in the objtree when we build it out of tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-17 04:42:43 +00:00
pythonpath = PYTHONPATH=scripts/dtc/pylibfdt
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
Makefile: Use common args for dtoc At present the dtoc commmand line is repeated twice in the Makefile. Use a variable to avoid this, so it is easier to add more conditional arguments. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:16 +00:00
DTOC_ARGS := $(pythonpath) $(srctree)/tools/dtoc/dtoc \
Makefile: Pass the U-Boot phase to dtoc Pass the U-Boot phase as a parameter so dtoc can use it. At present it is ether "spl" or "tpl". Signed-off-by: Simon Glass <sjg@chromium.org>
2021-02-03 13:01:03 +00:00
-d $(obj)/$(SPL_BIN).dtb -p $(SPL_NAME)
Makefile: Use common args for dtoc At present the dtoc commmand line is repeated twice in the Makefile. Use a variable to avoid this, so it is easier to add more conditional arguments. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:16 +00:00
dm: of-platadata: Add option for device instantiation Add Kconfig options to support build-time device instantiation. When fully implemented, this will allow dtoc to create U-Boot devices (i.e. struct udevice records) at build time, thus reducing code space in SPL. For now this defaults to off, but will be enabled when the rest of the implementation is in place. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-02-03 13:01:13 +00:00
ifneq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA_INST),)
DTOC_ARGS += -i
endif
Makefile: Invoke dtoc only once Update the Makefile to run dtoc only once, generating all required files. This saves time since there is a lot of processing in each invocation of dtoc. We already have a variable for the object files to build, so use that instead of repeating the same filenames. Add a C version of this also, for the same reason. This makes it easier to add new C files (generated by dtoc) to the build later, as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-29 03:34:53 +00:00
quiet_cmd_dtoc = DTOC $@
cmd_dtoc = $(DTOC_ARGS) -c $(obj)/dts -C include/generated all
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
quiet_cmd_plat = PLAT $@
kbuild: add FORCE to dependency of $(obj)/dts/dt-platdata.o if_changed must have FORCE as a prerequisite. Add $(obj)/dts/dt-platdata.o to 'targets' so that the corresponding .cmd file is included. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-17 07:21:35 +00:00
cmd_plat = $(CC) $(c_flags) -c $< -o $(filter-out $(PHONY),$@)
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
Makefile: Use a variable for generated of-platdata headers There are actually two generated files but only one is currently mentioned in the Makefile as a dependency. Put them both in a Makefile variable and use that instead, to avoid inconsistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:52 +00:00
$(obj)/dts/dt-%.o: $(obj)/dts/dt-%.c $(platdata-hdr)
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
$(call if_changed,plat)
Makefile: Avoid running dtoc every time Since the dst_dir rule always runs, it causes a rebuild of the of-platdata files even if not needed. Create the directory inside the rule instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:49 +00:00
# Don't use dts_dir here, since it forces running this expensive rule every time
Makefile: Use a variable for generated of-platdata headers There are actually two generated files but only one is currently mentioned in the Makefile as a dependency. Put them both in a Makefile variable and use that instead, to avoid inconsistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:52 +00:00
$(platdata-hdr) $(u-boot-spl-platdata_c) &: $(obj)/$(SPL_BIN).dtb
Makefile: Avoid running dtoc every time Since the dst_dir rule always runs, it causes a rebuild of the of-platdata files even if not needed. Create the directory inside the rule instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:49 +00:00
@[ -d $(obj)/dts ] || mkdir -p $(obj)/dts
Makefile: Remove old of-platdata files before regenerating Which files we generate depends on the setting of OF_PLATDATA_INST in the build. This might change between builds, but the build directory may be reused. Leaving old files around is confusing and switching the OF_PLATDATA_INST setting does not necessarily regenerate the files, e.g. if the devicetree has not changed. Remove all the files before regenerating new ones. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:53 +00:00
@# Remove old files since which ones we generate depends on the setting
@# of OF_PLATDATA_INST and this might change between builds. Leaving old
@# ones around is confusing and it is possible that switching the
@# setting again will use the old one instead of regenerating it.
@rm -f $(u-boot-spl-all-platdata_c) $(u-boot-spl-all-platdata)
Makefile: Invoke dtoc only once Update the Makefile to run dtoc only once, generating all required files. This saves time since there is a lot of processing in each invocation of dtoc. We already have a variable for the object files to build, so use that instead of repeating the same filenames. Add a C version of this also, for the same reason. This makes it easier to add new C files (generated by dtoc) to the build later, as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-29 03:34:53 +00:00
$(call if_changed,dtoc)
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
ORIGEN: Add MMC SPL support Adds mmc boot support. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-08-18 22:37:20 +00:00
ifdef CONFIG_SAMSUNG
SPL: EXYNOS: Prepare for variable size SPL support When variable size SPL is used, the BL1 expects the SPL to be encapsulated differently: instead of putting the checksum at a fixed offset in the SPL blob, prepend the blob with a header including the size and the checksum. The enhancements include - adding a command line option, '--vs' to indicate the need for the variable size encapsulation - padding the fixed size encapsulated blob with 0xff instead of random memory contents - do not silently truncate the input file, report error instead - no need to explicitly closing files/freeing memory, this all happens on exit; removing cleanups it makes code clearer - profuse commenting - modify Makefile to allow enabling the new feature per board Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-26 04:14:27 +00:00
ifdef CONFIG_VAR_SIZE_SPL
VAR_SIZE_PARAM = --vs
else
VAR_SIZE_PARAM =
endif
kbuild: change out-of-tree build This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-04 08:24:24 +00:00
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
kbuild: rename OBJTREE to objtree Prior to Kbuild, $(OBJTREE) was used for pointing to the top of build directory with absolute path. In Kbuild style, $(objtree) is used instead. This commit renames OBJTREE to objtree and delete the defition of OBJTREE. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-11 02:05:21 +00:00
$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
ORIGEN: Add MMC SPL support Adds mmc boot support. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-08-18 22:37:20 +00:00
endif
kbuild: use shorten logs objcopy rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:14 +00:00
quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
x86: Add SPL build rules for start-up code When SPL is used we need to build the 16-bit start-up code. Add Makefile rules to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:04:03 +00:00
OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
x86: Allow 16-bit init to be in TPL At present we support having 16-bit init be in SPL or U-Boot proper, but not TPL. Add support for this so that TPL can boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:53 +00:00
$(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
kbuild: use shorten logs objcopy rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:14 +00:00
fdt: Build an SPL binary without device tree At present u-boot-spl.bin holds the plain SPL binary without the device tree. This is somewhat annoying since you need either u-boot-spl.bin or u-boot-spl-dtb.bin depending on whether device tree is used. Adjust the build such that u-boot-spl.bin includes a device tree (if enabled), and the plain binary is in u-boot-spl-nodtb.bin. For now u-boot-spl-dtb.bin remains the same. Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 01:10:51 +00:00
$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
kbuild: use shorten logs objcopy rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:14 +00:00
$(call if_changed,objcopy)
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
binman: x86: Separate out 16-bit reset and init code At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-24 13:22:49 +00:00
OBJCOPYFLAGS_u-boot-x86-start16-spl.bin := -O binary -j .start16
$(obj)/u-boot-x86-start16-spl.bin: $(obj)/u-boot-spl FORCE
x86: Add SPL build rules for start-up code When SPL is used we need to build the 16-bit start-up code. Add Makefile rules to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:04:03 +00:00
$(call if_changed,objcopy)
binman: x86: Separate out 16-bit reset and init code At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-24 13:22:49 +00:00
OBJCOPYFLAGS_u-boot-x86-start16-tpl.bin := -O binary -j .start16
$(obj)/u-boot-x86-start16-tpl.bin: $(obj)/u-boot-tpl FORCE
$(call if_changed,objcopy)
OBJCOPYFLAGS_u-boot-x86-reset16-spl.bin := -O binary -j .resetvec
$(obj)/u-boot-x86-reset16-spl.bin: $(obj)/u-boot-spl FORCE
$(call if_changed,objcopy)
OBJCOPYFLAGS_u-boot-x86-reset16-tpl.bin := -O binary -j .resetvec
$(obj)/u-boot-x86-reset16-tpl.bin: $(obj)/u-boot-tpl FORCE
x86: Allow 16-bit init to be in TPL At present we support having 16-bit init be in SPL or U-Boot proper, but not TPL. Add support for this so that TPL can boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-26 03:58:53 +00:00
$(call if_changed,objcopy)
kbuild: change out-of-tree build This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-04 08:24:24 +00:00
LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
Makefile: Fix linking with modern binutils Since Binutils 1a9ccd70f9a7[1] u-boot will not link targets that set CONFIG_SYS_TEXT_BASE=0 with the following error: LD u-boot arm-linux-gnueabi-ld.bfd: u-boot: Not enough room for program headers, try linking with -N arm-linux-gnueabi-ld.bfd: final link failed: Bad value The issue can be reproduced with the bad binutils and the rock2_defconfig target. This issue was also encountered by the powerpc kernel[2], with the fix being to pass --no-dynamic-linker for linkers newer than 2.26 when this flag was introduced. The option tells ld that the PIE or shared lib does not need loaded program headers. Ubuntu Zesty's Binutils 2.27.51.20161202 hits this error. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=1a9ccd70f9a7 [2] https://git.kernel.org/cgit/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=ff45000fcb56b5b0f1a14a865d3541746d838a0a Signed-off-by: Joel Stanley <joel@jms.id.au> [AF: Apply to LDFLAGS_$(SPL_BIN) as well, suggested by Tom Rini] Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-04-09 18:33:58 +00:00
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
build: link with --build-id=none Some toolchains are compiled so that they pass a --build-id=something parameter to the linker implicitly. This causes U-Boot LTO linking to fail with something like: ld: section .note.gnu.build-id LMA ... overlaps section .text LMA ... because U-Boot's link scripts do not currently handle .note.gnu.build-id section. Fix this by explicitly disabling build-id. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:04 +00:00
LDFLAGS_$(SPL_BIN) += --build-id=none
PowerPC: Stop re-using CONFIG_SPL_TEXT_BASE for TPL Rather than checking for CONFIG_TPL_BUILD and then re-defining CONFIG_SPL_TEXT_BASE make use of CONFIG_TPL_TEXT_BASE directly. Cc: York Sun <york.sun@nxp.com> Cc: Po Liu <po.liu@nxp.com> Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Timur Tabi <timur@tabi.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-22 22:09:24 +00:00
# Pick the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
spl: allow a separate TEXT_BASE, LDSCRIPT and MAX_SIZE for TPL For the bringup of the RK3368, we need to support TPL and SPL running from different addresses... which requires both stages to use a distinct TEXT_BASE. This commit adds support for having a separate LDSCRIPT for TPL (which is expected to make use of the TPL_MAX_SIZE define) and for having a the option of defining TPL_TEXT_BASE and having the TPL stage linked against this address. Note that the handling of the TEXT_BASE is designed to not interfere with the previous assumption that SPL_TEXT_BASE should be used for TPL as well, unless TPL_TEXT_BASE is defined. For this reason, the test in Makefile.spl uses the following (seemingly redundant checks): 1. looks for $(SPL_TPL_)TEXT_BASE 2. looks for SPL_TEXT_BASE (even when building in TPL) Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-04 12:47:46 +00:00
ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
endif
Makefile: move some flags to spl/Makefile Some flags are used for SPL (and TPL) build only. This commit moves them from config.mk to spl/Makefile. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:22 +00:00
spl: socfpga: Generate Arria10 SFP header V1 Generate SoCFPGA boot header version 1 instead of version 0 for Arria10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Chin Liang See <chin.liang.see@intel.com>
2018-04-15 13:21:09 +00:00
ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage_v1
else
socfpga: Simplify Makefile filenames We don't need the -dtb suffix anymore, so drop it. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 01:10:53 +00:00
MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
spl: socfpga: Generate Arria10 SFP header V1 Generate SoCFPGA boot header version 1 instead of version 0 for Arria10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Chin Liang See <chin.liang.see@intel.com>
2018-04-15 13:21:09 +00:00
endif
socfpga: Simplify Makefile filenames We don't need the -dtb suffix anymore, so drop it. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 01:10:53 +00:00
$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
Makefile: Add target for building bootable SPL image for SoCFPGA Add build target for generating boot partition images recognised by the SoCFPGA BootROM. The SoCFPGA BootROM expects four copies of the u-boot-spl-dtb.sfp at the beginning of boot partition. Those are u-boot-spl-dtb.bin augmented by a header with which the BootROM can work. The u-boot-dtb.img uImage is appended to this to produce a full boot partition image, the u-boot-with-spl-dtb.sfp . This is the name of the final target. Signed-off-by: Marek Vasut <marex@denx.de>
2015-07-15 00:53:45 +00:00
$(call if_changed,mkimage)
sunxi: Use mkimage for SPL boot image generation Switch the SPL boot image generation from using mksunxiboot to the new sunxi_egon format of mkimage. Verified to create identical results for all 152 Allwinner boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Samuel Holland <samuel@sholland.org>
2018-12-20 15:41:34 +00:00
MKIMAGEFLAGS_sunxi-spl.bin = -T sunxi_egon \
-n $(CONFIG_DEFAULT_DEVICE_TREE)
Makefile: socfpga: Add target to generate hex output for combined spl and dtb Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream for Intel SOCFPGA SOC64 devices. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-01 12:04:16 +00:00
OBJCOPYFLAGS_u-boot-spl-dtb.hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE)
$(obj)/u-boot-spl-dtb.hex: $(obj)/u-boot-spl-dtb.bin FORCE
$(call if_changed,objcopy)
kbuild: add missing FORCE where $(call if_changed, ) is used FORCE is needed for $(call if_changed,...) to be evaluated every time. Otherwise, the command is not executed when the command line has changed but any prerequisite has not been updated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05 08:55:13 +00:00
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
sunxi: Use mkimage for SPL boot image generation Switch the SPL boot image generation from using mksunxiboot to the new sunxi_egon format of mkimage. Verified to create identical results for all 152 Allwinner boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Samuel Holland <samuel@sholland.org>
2018-12-20 15:41:34 +00:00
$(call if_changed,mkimage)
sunxi: non-FEL SPL boot support for sun7i Add support for booting from an MMC card. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
2014-05-05 10:52:30 +00:00
scripts: sunxi: Build an raw SPL image Introduce a new sunxi-spl-with-ecc.bin image with already the right header, ECC, randomizer and padding for the BROM to be able to read it. It needs to be flashed using a raw access to the NAND so that the controller doesn't change a thing to it, since we already have all the right parameters. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-02-27 17:22:13 +00:00
quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
-c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
-p $(CONFIG_SYS_NAND_PAGE_SIZE) \
-o $(CONFIG_SYS_NAND_OOBSIZE) \
-u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
-e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
-s -b $< $@
$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
$(call if_changed,sunxi_spl_image_builder)
tools: MediaTek: add MTK boot header generation to mkimage This patch adds support for MTK boot image generation. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:49 +00:00
# MediaTek's specific SPL build
MKIMAGEFLAGS_u-boot-spl-mtk.bin = -T mtk_image \
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
$(obj)/u-boot-spl-mtk.bin: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
Makefile: Generate a symbol file for u-boot-spl Add a rule to generate u-boot-spl.sym so that pytest can discover the available unit tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-26 02:38:30 +00:00
quiet_cmd_sym ?= SYM $@
cmd_sym ?= $(OBJDUMP) -t $< > $@
$(obj)/$(SPL_BIN).sym: $(obj)/$(SPL_BIN) FORCE
$(call if_changed,sym)
build: support building with Link Time Optimizations Add plumbing for building U-Boot with Link Time Optimizations. When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive / --no-whole-archive group, otherwise some functions declared in assembly may not be resolved and linking may fail. Note: clang may throw away linker list symbols it thinks are unused when compiling with LTO. To force these symbols to be included, we refer to them via the __ADDRESSABLE macro in a C file generated from compiled built-in.o files before linking. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:03 +00:00
# Generate linker list symbols references to force compiler to not optimize
# them away when compiling with LTO
ifdef CONFIG_LTO
u-boot-spl-keep-syms-lto := $(obj)/keep-syms-lto.o
u-boot-spl-keep-syms-lto_c := \
$(patsubst $(obj)/%.o,$(obj)/%.c,$(u-boot-spl-keep-syms-lto))
quiet_cmd_keep_syms_lto = KSL $@
cmd_keep_syms_lto = \
build: remove the variable NM in gen_ll_addressable_symbols.sh With LTO activated, the buildman tools failed with an error on my configuration (Ubuntu 20.04, stm32mp15_trusted_defconfig) with the error: ../arm-linux-gnueabi/bin/nm: scripts/gen_ll_addressable_symbols.sh: file format not recognized It seems the shell variable initialization NM=$(NM) is not correctly interpreted when shell is started in the Makefile, but I have not this issue when I compile the same target without buildman. I don't found the root reason of the problem but I solve it by providing $(NM) as script parameter instead using a shell variable. The command executed is identical: cmd_keep-syms-lto.c := NM=arm-none-linux-gnueabihf-gcc-nm \ u-boot/scripts/gen_ll_addressable_symbols.sh arch/arm/cpu/built-in.o \ .... net/built-in.o >keep-syms-lto.c cmd_keep-syms-lto.c := u-boot/scripts/gen_ll_addressable_symbols.sh \ arm-none-linux-gnueabihf-gcc-nm arch/arm/cpu/built-in.o \ ... net/built-in.o > keep-syms-lto.c Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-21 07:56:07 +00:00
$(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
build: support building with Link Time Optimizations Add plumbing for building U-Boot with Link Time Optimizations. When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive / --no-whole-archive group, otherwise some functions declared in assembly may not be resolved and linking may fail. Note: clang may throw away linker list symbols it thinks are unused when compiling with LTO. To force these symbols to be included, we refer to them via the __ADDRESSABLE macro in a C file generated from compiled built-in.o files before linking. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:03 +00:00
quiet_cmd_keep_syms_lto_cc = KSLCC $@
cmd_keep_syms_lto_cc = \
$(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
$(u-boot-spl-keep-syms-lto_c): $(u-boot-spl-main) $(u-boot-spl-platdata)
$(call if_changed,keep_syms_lto)
$(u-boot-spl-keep-syms-lto): $(u-boot-spl-keep-syms-lto_c)
$(call if_changed,keep_syms_lto_cc)
else
u-boot-spl-keep-syms-lto :=
endif
Makefile: Allow the SPL final link rule to be overridden Overriding the final link rule is possible with U-Boot proper. It us used to create a sandbox image links with host libraries. To build a sandbox SPL image we need the same feature for SPL. To support this, update the SPL link rule so sandbox can override it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:57:44 +00:00
# Rule to link u-boot-spl
# May be overridden by arch/$(ARCH)/config.mk
build: support building with Link Time Optimizations Add plumbing for building U-Boot with Link Time Optimizations. When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive / --no-whole-archive group, otherwise some functions declared in assembly may not be resolved and linking may fail. Note: clang may throw away linker list symbols it thinks are unused when compiling with LTO. To force these symbols to be included, we refer to them via the __ADDRESSABLE macro in a C file generated from compiled built-in.o files before linking. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:03 +00:00
ifdef CONFIG_LTO
quiet_cmd_u-boot-spl ?= LTO $@
cmd_u-boot-spl ?= \
( \
cd $(obj) && \
$(CC) -nostdlib -nostartfiles $(LTO_FINAL_LDFLAGS) $(c_flags) \
$(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_$(@F):%=-Wl,%) \
$(patsubst $(obj)/%,%,$(u-boot-spl-init)) \
-Wl,--whole-archive \
$(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
$(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
$(patsubst $(obj)/%,%,$(u-boot-spl-keep-syms-lto)) \
$(PLATFORM_LIBS) \
-Wl,--no-whole-archive \
-Wl,-Map,$(SPL_BIN).map -o $(SPL_BIN) \
)
else
Makefile: Allow the SPL final link rule to be overridden Overriding the final link rule is possible with U-Boot proper. It us used to create a sandbox image links with host libraries. To build a sandbox SPL image we need the same feature for SPL. To support this, update the SPL link rule so sandbox can override it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:57:44 +00:00
quiet_cmd_u-boot-spl ?= LD $@
Makefile, Makefile.spl: cosmetic change Indent the linking commands so that they look cosmetically better. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-20 11:24:01 +00:00
cmd_u-boot-spl ?= \
( \
cd $(obj) && \
$(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_$(@F)) \
$(patsubst $(obj)/%,%,$(u-boot-spl-init)) \
build: use thin archives instead of incremental linking Currently we use incremental linking (ld -r) to link several object files from one directory into one built-in.o object file containing the linked code from that directory (and its subdirectories). Linux has, some time ago, moved to thin archives instead. Thin archives are archives (.a) that do not really contain the object files, only references to them. Using thin archives instead of incremental linking - saves disk space - apparently works better with dead code elimination - makes things easier for LTO The third point is the important one for us. With incremental linking there are several options how to do LTO, and that would unnecessarily complicate things. We have to use the --whole-archive/--no-whole-archive linking option instead of --start-group/--end-group, otherwise linking may fail because of unresolved symbols, or the resulting binary will be unusable. We also need to use the P flag for ar, otherwise final linking may fail. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:02 +00:00
--whole-archive \
Makefile, Makefile.spl: cosmetic change Indent the linking commands so that they look cosmetically better. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-20 11:24:01 +00:00
$(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
$(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
build: use thin archives instead of incremental linking Currently we use incremental linking (ld -r) to link several object files from one directory into one built-in.o object file containing the linked code from that directory (and its subdirectories). Linux has, some time ago, moved to thin archives instead. Thin archives are archives (.a) that do not really contain the object files, only references to them. Using thin archives instead of incremental linking - saves disk space - apparently works better with dead code elimination - makes things easier for LTO The third point is the important one for us. With incremental linking there are several options how to do LTO, and that would unnecessarily complicate things. We have to use the --whole-archive/--no-whole-archive linking option instead of --start-group/--end-group, otherwise linking may fail because of unresolved symbols, or the resulting binary will be unusable. We also need to use the P flag for ar, otherwise final linking may fail. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:02 +00:00
--no-whole-archive \
Makefile, Makefile.spl: cosmetic change Indent the linking commands so that they look cosmetically better. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-20 11:24:01 +00:00
$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN) \
)
build: support building with Link Time Optimizations Add plumbing for building U-Boot with Link Time Optimizations. When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive / --no-whole-archive group, otherwise some functions declared in assembly may not be resolved and linking may fail. Note: clang may throw away linker list symbols it thinks are unused when compiling with LTO. To force these symbols to be included, we refer to them via the __ADDRESSABLE macro in a C file generated from compiled built-in.o files before linking. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:03 +00:00
endif
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
dm: Makefile: Build of-platdata files when the feature is enabled Update the Makefile to call dtoc to create the C header and source files, then build these into the image. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:10 +00:00
$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
build: support building with Link Time Optimizations Add plumbing for building U-Boot with Link Time Optimizations. When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive / --no-whole-archive group, otherwise some functions declared in assembly may not be resolved and linking may fail. Note: clang may throw away linker list symbols it thinks are unused when compiling with LTO. To force these symbols to be included, we refer to them via the __ADDRESSABLE macro in a C file generated from compiled built-in.o files before linking. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:24:03 +00:00
$(u-boot-spl-main) $(u-boot-spl-keep-syms-lto) \
$(obj)/u-boot-spl.lds FORCE
kbuild: fix a bug of the u-boot-spl link rule cmd_u-boot-spl includes $(PLATFORM_LIBS) which changes when CONFIG_USE_PRIVATE_GCC is updated. The u-boot-spl image should be re-linked if any prerequisite is newer than it or the command line has changed. $(call, if_changed,...) should be used instead of $(call cmd,...). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-23 16:30:44 +00:00
$(call if_changed,u-boot-spl)
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
PHONY += $(u-boot-spl-dirs)
kbuild: SPL/TPL: generate separate asm-offsets.h for SPL and TPL Currently generic-asm-offsets.h and asm-offsets.h are generated based on U-Boot proper config options. The same asm-offsets headers are used for building U-Boot SPL/TPL, which causes potential offset mismatch if U-Boot proper has different config options from U-Boot SPL/TPL. This commit adds: spl/include/generated/(generic-)asm-offsets.h tpl/include/generated/(generic-)asm-offsets.h spl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_SPL=y, and included when building SPL. tpl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_TPL=y, and included when building TPL. They are created before Kbuild descends into SPL/TPL object directories and builds $(obj)/dts/dt-platdata.o because $(obj)/dts/dt-platdata.c includes a bunch of headers. Prepend -I$(obj)/include to $(UBOOTINCLUDE) so (generic-)asm-offsets.h is searched in {spl,tpl}/include/generated/. Requested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-17 07:21:37 +00:00
$(u-boot-spl-dirs): $(u-boot-spl-platdata) prepare
kbuild: refactor Makefile and spl/Makefile more This commit refactors rules of directory descending and defines u-boot-dirs and u-boot-all-dirs. (We will need u-boot-all-dirs when using scripts/Makefile.clean) Additionally, rename LIBS-y to libs-y. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-04 08:24:37 +00:00
$(Q)$(MAKE) $(build)=$@
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
kbuild: SPL/TPL: generate separate asm-offsets.h for SPL and TPL Currently generic-asm-offsets.h and asm-offsets.h are generated based on U-Boot proper config options. The same asm-offsets headers are used for building U-Boot SPL/TPL, which causes potential offset mismatch if U-Boot proper has different config options from U-Boot SPL/TPL. This commit adds: spl/include/generated/(generic-)asm-offsets.h tpl/include/generated/(generic-)asm-offsets.h spl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_SPL=y, and included when building SPL. tpl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_TPL=y, and included when building TPL. They are created before Kbuild descends into SPL/TPL object directories and builds $(obj)/dts/dt-platdata.o because $(obj)/dts/dt-platdata.c includes a bunch of headers. Prepend -I$(obj)/include to $(UBOOTINCLUDE) so (generic-)asm-offsets.h is searched in {spl,tpl}/include/generated/. Requested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-17 07:21:37 +00:00
PHONY += prepare
prepare:
$(Q)$(MAKE) $(build)=$(obj)/.
kbuild: use shorten logs for misc targets Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:19 +00:00
quiet_cmd_cpp_lds = LDS $@
kbuild: fix a bug in regeneration of linker scripts In some use cases, SPL linker script was not updated even when it should be. For instance, $ make tricoder_config all [ build complete ] ... modify include/configs/tricoder.h $ make spl/u-boot-spl.lds should be updated in this case, but it wasn't. To fix this problem, linker scripts generation should be handled by $(call if_changed_dep,...) rather than by $(call if_changed,...). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reported-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-04-09 11:10:43 +00:00
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
fdt: Allow C++ comments in link scripts and DT files At present // in a device-tree file or link script causes a warning. But this is used in the standard license header. Update the compiler flags to use C99, which permits this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:43 +00:00
-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
kbuild: use shorten logs for misc targets Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:19 +00:00
kbuild: use Linux Kernel build scripts Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-04 08:24:28 +00:00
$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
kbuild: fix a bug in regeneration of linker scripts In some use cases, SPL linker script was not updated even when it should be. For instance, $ make tricoder_config all [ build complete ] ... modify include/configs/tricoder.h $ make spl/u-boot-spl.lds should be updated in this case, but it wasn't. To fix this problem, linker scripts generation should be handled by $(call if_changed_dep,...) rather than by $(call if_changed,...). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reported-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-04-09 11:10:43 +00:00
$(call if_changed_dep,cpp_lds)
spl: add initial support for a generic SPL framework Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-18 07:48:07 +00:00
kbuild: use shorten logs objcopy rules Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-24 02:12:14 +00:00
# read all saved command lines
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
$(cmd_files): ; # Do not try to update included dependency files
include $(cmd_files)
endif
kbuild: use Linux Kernel build scripts Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-04 08:24:28 +00:00
PHONY += FORCE
FORCE:
Makefile: Tidy up SPL dtb production Use the SPL_NAME variable to simplify the rules. Drop the SPL targets clean-files since the SPL and TPL dts/ directories are removed by existing rules. Move the SPL rules into a new spl_dtbs to avoid the complicated $(if) construct. Also drop unused pieces from the 'targets' variable. With this, SPL and TPL have separate dtbs which respect the various u-boot,dm-spl / u-boot,dm-tpl tags. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-23 02:30:15 +00:00
$(obj)/dts/dt-$(SPL_NAME).dtb: dts/dt.dtb
$(Q)$(MAKE) $(build)=$(obj)/dts spl_dtbs
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
Makefile: Avoid running dtoc every time Since the dst_dir rule always runs, it causes a rebuild of the of-platdata files even if not needed. Create the directory inside the rule instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-24 17:40:49 +00:00
PHONY += dts_dir
dts_dir:
$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
kbuild: use Linux Kernel build scripts Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-04 08:24:28 +00:00
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
kbuild: spl: Add shrunk arch-dtbs to targets list This avoids needless rebuilding. Fixes: 2f57c95100f2 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT") CC: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-04 12:38:31 +00:00
SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
.SECONDEXPANSION:
kbuild: spl: Fix parallel build The dts dir must exists when running this rule. That missing dependency broke e.g. "make -j" for the am65x targets. Fixes: 2f57c95100f2 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT") CC: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-04 12:38:30 +00:00
$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) dts_dir
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
$(call if_changed,fdtgrep)
kbuild: spl: Add shrunk arch-dtbs to targets list This avoids needless rebuilding. Fixes: 2f57c95100f2 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT") CC: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-04 12:38:31 +00:00
targets += $(SPL_OF_LIST_TARGETS)
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
MKIMAGEFLAGS_$(SPL_BIN).multidtb.fit = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-n "Multi DTB fit image for $(SPL_BIN)" -E \
$(patsubst %,-b %,$(SHRUNK_ARCH_DTB))
$(obj)/$(SPL_BIN).multidtb.fit: /dev/null $(SHRUNK_ARCH_DTB) FORCE
$(call if_changed,mkimage)
Set time and umask on multi-dtb fit images to ensure reproducibile builds. When building compressed (lzop, gzip) multi-dtb fit images, the compression tool may embed the time or umask in the image. Work around this by manually setting the time of the source file using SOURCE_DATE_EPOCH and a hard-coded 0600 umask. With gzip, this could be accomplished by using -n/--no-name, but lzop has no current workaround: https://bugs.debian.org/896520 Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
2018-06-03 19:26:57 +00:00
ifneq ($(SOURCE_DATE_EPOCH),)
touch -d @$(SOURCE_DATE_EPOCH) $(obj)/$(SPL_BIN).multidtb.fit
chmod 0600 $(obj)/$(SPL_BIN).multidtb.fit
endif
spl: dm: Make it possible for the SPL to pick its own DTB from a FIT u-boot can be embedded within a FIT image with multiple DTBs. It then selects at run-time which one is best suited for the platform. Use the same principle here for the SPL: put the DTBs in a FIT image, compress it (LZO, GZIP, or no compression) and append it at the end of the SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c it's unused.] Signed-off-by Tom Rini <trini@konsulko.com>
2017-09-15 10:57:32 +00:00
$(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit
@gzip -kf9 $< > $@
$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
@lzop -f9 $< > $@
armv8: K3: am654: Add support for generating build targets Update Makefile to generate - tispl.bin: First stage bootloader on ARMv8 core - u-boot.img: Second stage bootloader on ARMv8 core. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:27:15 +00:00
ifdef CONFIG_ARCH_K3
tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
$(call if_changed,mkfitimage)
endif
Reference in a new issue Copy permalink