mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 00:49:43 +00:00
49 lines
1.6 KiB
Text
49 lines
1.6 KiB
Text
|
This file contains information for VSC9953, a Vitesse L2 Switch IP
|
||
|
|
which is integrated in the T1040/T1020 Freescale SoCs.
|
||
|
|
|
||
|
|
About Device:
|
||
|
|
=============
|
||
|
|
VSC9953 is an 8-port Gigabit Ethernet switch supports the following features:
|
||
|
|
- 8192 MAC addresses
|
||
|
|
- Static Address provisioning
|
||
|
|
- Dynamic learning of MAC addresses and aging
|
||
|
|
- 4096 VLANs
|
||
|
|
- Independent and shared VLAN learning (IVL, SVL)
|
||
|
|
- Policing with storm control and MC/BC protection
|
||
|
|
- IPv4 and IPv6 multicast
|
||
|
|
- Jumbo frames (9.6 KB)
|
||
|
|
- Access Control List
|
||
|
|
- VLAN editing, translation and remarking
|
||
|
|
- RMON counters per port
|
||
|
|
|
||
|
|
Switch interfaces:
|
||
|
|
- 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs
|
||
|
|
- 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links)
|
||
|
|
to FMan ports (FM1@DTSEC1 and FM1@DTSEC2)
|
||
|
|
|
||
|
|
Commands Overview:
|
||
|
|
=============
|
||
|
|
Commands supported
|
||
|
|
- enable/disable a port
|
||
|
|
- check a port's link speed, duplexity and status.
|
||
|
|
|
||
|
|
Commands syntax
|
||
|
|
ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
|
||
|
|
ethsw port <port_nr> show - show an l2 switch port's configuration
|
||
|
|
|
||
|
|
port_nr=0..9; use "all" for all ports
|
||
|
|
|
||
|
|
=> ethsw port all show
|
||
|
|
Port Status Link Speed Duplex
|
||
|
|
0 enabled down 10 half
|
||
|
|
1 enabled down 10 half
|
||
|
|
2 enabled down 10 half
|
||
|
|
3 enabled up 1000 full
|
||
|
|
4 disabled down - half
|
||
|
|
5 disabled down - half
|
||
|
|
6 disabled down - half
|
||
|
|
7 disabled down - half
|
||
|
|
8 enabled up 2500 full
|
||
|
|
9 enabled up 2500 full
|
||
|
|
=>
|