Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/bcm968580xref_ram_defconfig

54 lines
1.2 KiB
Text
Raw Normal View History

bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
CONFIG_ARM=y
CONFIG_ARCH_BCM6858=y
CONFIG_SYS_TEXT_BASE=0x10000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=1
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
CONFIG_TARGET_BCM968580XREF=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
configs: Rename CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_LEGACY_IMAGE_FORMAT The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of cmd/ switch to using CONFIG_IS_ENABLED() to test what is set. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-23 11:14:07 +00:00
CONFIG_LEGACY_IMAGE_FORMAT=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
bcm968580xref: enable gpio support Enable the gpio support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-03-07 10:36:39 +00:00
CONFIG_CMD_GPIO=y
bcm968580xref: add nand support Enable the nand support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-03-15 14:14:44 +00:00
CONFIG_CMD_MTD=y
CONFIG_CMD_NAND=y
CONFIG_CMD_PART=y
bcm968580xref: enable spi-nor support This commit enable the support of the spi-nor for the broadcom reference board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-08-14 13:18:41 +00:00
CONFIG_CMD_SPI=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
CONFIG_DOS_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_DEFAULT_DEVICE_TREE="bcm968580xref"
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
# CONFIG_NET is not set
CONFIG_BLK=y
CONFIG_CLK=y
bcm968580xref: enable gpio support Enable the gpio support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-03-07 10:36:39 +00:00
CONFIG_DM_GPIO=y
CONFIG_BCM6345_GPIO=y
bcm968580xref: enable led support Enable the led support in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-03-22 16:02:04 +00:00
CONFIG_LED=y
CONFIG_LED_BCM6858=y
CONFIG_LED_BLINK=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
# CONFIG_MMC is not set
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
CONFIG_DM_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:03 +00:00
CONFIG_MTD_RAW_NAND=y
bcm968580xref: add nand support Enable the nand support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-03-15 14:14:44 +00:00
CONFIG_NAND_BRCMNAND=y
CONFIG_NAND_BRCMNAND_6858=y
bcm968580xref: enable spi-nor support This commit enable the support of the spi-nor for the broadcom reference board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-08-14 13:18:41 +00:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_MACRONIX=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_CONS_INDEX=0
CONFIG_DM_SERIAL=y
CONFIG_SERIAL_SEARCH_ALL=y
serial: bcm6858: remove driver and switch to bcm6345 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-01 17:42:09 +00:00
CONFIG_BCM6345_SERIAL=y
bcm968580xref: enable spi-nor support This commit enable the support of the spi-nor for the broadcom reference board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-08-14 13:18:41 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_BCM63XX_HSSPI=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
CONFIG_SYSRESET=y
bcm968580: enable watchdog and reboot with watchdog Enable watchdog and reboot with watchdog in the configuration. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-01-28 14:37:32 +00:00
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_WDT_BCM6345=y
bcm968580xref: add initial support This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-10-11 16:31:59 +00:00
# CONFIG_GENERATE_SMBIOS_TABLE is not set
Reference in a new issue Copy permalink