Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/libretech-ac_defconfig

76 lines
1.8 KiB
Text
Raw Normal View History

boards: Amlogic: Add support for Libretech-AC LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 10:20:35 +00:00
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="libretech-ac"
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXL=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFF0000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=1
boards: Amlogic: Add support for Libretech-AC LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 10:20:35 +00:00
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SECT_SIZE=0x10000
boards: Amlogic: Add support for Libretech-AC LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 10:20:35 +00:00
CONFIG_IDENT_STRING=" libretech-ac"
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_SETUP=y
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 02:51:14 +00:00
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="usb start"
boards: Amlogic: Add support for Libretech-AC LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 10:20:35 +00:00
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_ADC=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s805x-libretech-ac"
CONFIG_ENV_IS_IN_SPI_FLASH=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
boards: Amlogic: Add support for Libretech-AC LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 10:20:35 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SARADC_MESON=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=8
CONFIG_PHY_MESON_GXL=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_POWER_DOMAIN=y
CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
CONFIG_DEBUG_UART_MESON=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MESON_SPIFC=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3=y
CONFIG_USB_KEYBOARD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink