u-boot/arch/arm/mach-imx/imx8m/Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# Copyright 2017 NXP

obj-y += lowlevel_init.o
obj-y += clock_slice.o soc.o
obj-$(CONFIG_ARMV8_PSCI) += psci.o
obj-$(CONFIG_IMX8MQ) += clock_imx8mq.o
obj-$(CONFIG_IMX8MM)$(CONFIG_IMX8MN)$(CONFIG_IMX8MP) += clock_imx8mm.o
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
imx: mx8m: add clock driver Add clock driver to support i.MX8M. There are two kind PLLs, FRAC pll and SSCG pll. ROM already configured SYS PLL1/2, we only need to configure the output. ocotp/i2c/pll decoding and configuration/usdhc/lcdif/dram pll/ enet clock are configured in the code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> 2018-01-10 05:20:22 +00:00			`#`
			`# Copyright 2017 NXP`

imx: mx8m: add soc related settings and files Add SoC level initialization code - arch_cpu_init - mmu table - detect cpu revision - reset cpu and wdog settings - timer init - wdog settings - lowlevel init to save/restore registers - a few dummy header file to avoid build failure - ft_system_setup Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> 2018-01-10 05:20:37 +00:00			`obj-y += lowlevel_init.o`
imx8m: rename clock to clock_imx8mq i.MX8MQ and i.MX8MM has totally different pll design, so rename clock to clock_imx8mq. Signed-off-by: Peng Fan <peng.fan@nxp.com> 2019-08-27 06:25:44 +00:00			`obj-y += clock_slice.o soc.o`
arm: imx: imx8m: Add basic PSCI provider implementation Implement basic PSCI provider to let OS turn CPU cores off and on, power off and restart the system and determine PSCI version. This is sufficient to remove the need for the ATF BL31 blob altogether. To make use of this functionality, active the following Kconfig options: # CONFIG_PSCI_RESET is not set CONFIG_ARMV8_MULTIENTRY=y CONFIG_ARMV8_SET_SMPEN=y CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y CONFIG_ARMV8_EA_EL3_FIRST=y CONFIG_ARMV8_PSCI=y CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER=4 CONFIG_ARMV8_SECURE_BASE=0x970000 CONFIG_ARM_SMCCC=y CONFIG_SYS_HAS_ARMV8_SECURE_BASE=y Signed-off-by: Marek Vasut <marex@denx.de> 2022-12-22 00:46:43 +00:00			`obj-$(CONFIG_ARMV8_PSCI) += psci.o`
imx8m: rename clock to clock_imx8mq i.MX8MQ and i.MX8MM has totally different pll design, so rename clock to clock_imx8mq. Signed-off-by: Peng Fan <peng.fan@nxp.com> 2019-08-27 06:25:44 +00:00			`obj-$(CONFIG_IMX8MQ) += clock_imx8mq.o`
imx: imx8mp: add basic clock i.MX8MP has similar architecture as i.MX8MN, but it has different clk root and index, so add that to make i.MX8MP could use the non-dm clock driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> 2019-12-27 03:39:15 +00:00			`obj-$(CONFIG_IMX8MM)$(CONFIG_IMX8MN)$(CONFIG_IMX8MP) += clock_imx8mm.o`