mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
218 lines
6.4 KiB
Text
218 lines
6.4 KiB
Text
|
/*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
|
* published by the Free Software Foundation.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
cpus {
|
||
|
|
cpu@0 {
|
||
|
|
cpu0-supply = <&vcc>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@80000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x80000000 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
user0 {
|
||
|
|
label = "user0";
|
||
|
|
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
|
||
|
|
linux,default-trigger = "none";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
wl12xx_vmmc: wl12xx_vmmc {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vwl1271";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
gpio = <&gpio5 29 0>; /* gpio157 */
|
||
|
|
startup-delay-us = <70000>;
|
||
|
|
enable-active-high;
|
||
|
|
vin-supply = <&vmmc2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpmc {
|
||
|
|
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
|
||
|
|
|
||
|
|
nand@0,0 {
|
||
|
|
compatible = "ti,omap2-nand";
|
||
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||
|
|
interrupt-parent = <&gpmc>;
|
||
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
||
|
|
linux,mtd-name = "micron,mt29f4g16abbda3w";
|
||
|
|
nand-bus-width = <16>;
|
||
|
|
ti,nand-ecc-opt = "bch8";
|
||
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
||
|
|
gpmc,sync-clk-ps = <0>;
|
||
|
|
gpmc,cs-on-ns = <0>;
|
||
|
|
gpmc,cs-rd-off-ns = <44>;
|
||
|
|
gpmc,cs-wr-off-ns = <44>;
|
||
|
|
gpmc,adv-on-ns = <6>;
|
||
|
|
gpmc,adv-rd-off-ns = <34>;
|
||
|
|
gpmc,adv-wr-off-ns = <44>;
|
||
|
|
gpmc,we-off-ns = <40>;
|
||
|
|
gpmc,oe-off-ns = <54>;
|
||
|
|
gpmc,access-ns = <64>;
|
||
|
|
gpmc,rd-cycle-ns = <82>;
|
||
|
|
gpmc,wr-cycle-ns = <82>;
|
||
|
|
gpmc,wr-access-ns = <40>;
|
||
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
||
|
|
gpmc,device-width = <2>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
twl: twl@48 {
|
||
|
|
reg = <0x48>;
|
||
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||
|
|
interrupt-parent = <&intc>;
|
||
|
|
twl_audio: audio {
|
||
|
|
compatible = "ti,twl4030-audio";
|
||
|
|
codec {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
at24@50 {
|
||
|
|
compatible = "at24,24c02";
|
||
|
|
readonly;
|
||
|
|
reg = <0x50>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Only found on the wireless SOM. For the SOM without wireless, the pins for
|
||
|
|
* MMC3 can be routed with jumpers to the second MMC slot on the devkit and
|
||
|
|
* gpio157 is not connected. So this should be OK to keep common for now,
|
||
|
|
* probably device tree overlays is the way to go with the various SOM and
|
||
|
|
* jumpering combinations for the long run.
|
||
|
|
*/
|
||
|
|
&mmc3 {
|
||
|
|
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
|
||
|
|
pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
vmmc-supply = <&wl12xx_vmmc>;
|
||
|
|
non-removable;
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-power-off-card;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
wlcore: wlcore@2 {
|
||
|
|
compatible = "ti,wl1283";
|
||
|
|
reg = <2>;
|
||
|
|
interrupt-parent = <&gpio5>;
|
||
|
|
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
|
||
|
|
ref-clock-frequency = <26000000>;
|
||
|
|
tcxo-clock-frequency = <26000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&omap3_pmx_core {
|
||
|
|
mmc3_pins: pinmux_mm3_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
mcbsp2_pins: pinmux_mcbsp2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
|
||
|
|
OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
uart2_pins: pinmux_uart2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
|
||
|
|
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
||
|
|
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
|
||
|
|
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
mcspi1_pins: pinmux_mcspi1_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
hsusb_otg_pins: pinmux_hsusb_otg_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
|
||
|
|
|
||
|
|
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart2_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mcspi1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&mcspi1_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&omap3_pmx_core2 {
|
||
|
|
mmc3_core2_pins: pinmux_mmc3_core2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "twl4030.dtsi"
|
||
|
|
#include "twl4030_omap3.dtsi"
|
||
|
|
|
||
|
|
&twl {
|
||
|
|
twl_power: power {
|
||
|
|
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
|
||
|
|
ti,use_poweroff;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&twl_gpio {
|
||
|
|
ti,use-leds;
|
||
|
|
};
|