u-boot/arch/arm/dts/fsl-ls1088a-ten64.dts

378 lines
6.4 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Travese Ten64 (LS1088) board
* Based on fsl-ls1088a-rdb.dts
* Copyright 2017-2020 NXP
* Copyright 2019-2021 Traverse Technologies
*
* Author: Mathew McBride <matt@traverse.com.au>
*/
/dts-v1/;
#include "fsl-ls1088a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Traverse Ten64";
compatible = "traverse,ten64", "fsl,ls1088a";
aliases {
spi0 = &qspi;
};
chosen {
stdout-path = "serial0:115200n8";
};
buttons {
compatible = "gpio-keys";
/* Fired by system controller when
* external power off (e.g ATX Power Button)
* asserted
*/
powerdn {
label = "External Power Down";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
linux,code = <KEY_POWER>;
};
/* Rear Panel 'ADMIN' button (GPIO_H) */
admin {
label = "ADMIN button";
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
sfp1down {
label = "ten64:green:sfp1:down";
gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
};
sfp2up {
label = "ten64:green:sfp2:up";
gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
};
admin {
label = "ten64:admin";
gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
};
};
sfp_xg0: dpmac2-sfp {
compatible = "sff,sfp";
i2c-bus = <&sfplower_i2c>;
tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
};
sfp_xg1: dpmac1-sfp {
compatible = "sff,sfp";
i2c-bus = <&sfpupper_i2c>;
tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
};
};
/* XG1 - Upper SFP */
&dpmac1 {
sfp = <&sfp_xg1>;
phy-connection-type = "10gbase-r";
managed = "in-band-status";
status = "okay";
};
/* XG0 - Lower SFP */
&dpmac2 {
sfp = <&sfp_xg0>;
phy-connection-type = "10gbase-r";
managed = "in-band-status";
status = "okay";
};
/* DPMAC3..6 is GE4 to GE8 */
&dpmac3 {
phy-handle = <&mdio1_phy5>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&dpmac4 {
phy-handle = <&mdio1_phy6>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&dpmac5 {
phy-handle = <&mdio1_phy7>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&dpmac6 {
phy-handle = <&mdio1_phy8>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
/* DPMAC7..10 is GE0 to GE3 */
&dpmac7 {
phy-handle = <&mdio1_phy1>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&dpmac8 {
phy-handle = <&mdio1_phy2>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&dpmac9 {
phy-handle = <&mdio1_phy3>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&dpmac10 {
phy-handle = <&mdio1_phy4>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
status = "okay";
};
&serial0 {
status = "okay";
};
&serial1 {
status = "okay";
};
&emdio1 {
status = "okay";
mdio1_phy5: ethernet-phy@c {
reg = <0xc>;
};
mdio1_phy6: ethernet-phy@d {
reg = <0xd>;
};
mdio1_phy7: ethernet-phy@e {
reg = <0xe>;
};
mdio1_phy8: ethernet-phy@f {
reg = <0xf>;
};
mdio1_phy1: ethernet-phy@1c {
reg = <0x1c>;
};
mdio1_phy2: ethernet-phy@1d {
reg = <0x1d>;
};
mdio1_phy3: ethernet-phy@1e {
reg = <0x1e>;
};
mdio1_phy4: ethernet-phy@1f {
reg = <0x1f>;
};
};
&esdhc {
status = "okay";
};
&i2c0 {
status = "okay";
sfpgpio: gpio@76 {
compatible = "ti,tca9539";
reg = <0x76>;
#gpio-cells = <2>;
gpio-controller;
admin_led_lower {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-low;
};
};
at97sc: tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
uc: board-controller@7e {
compatible = "traverse,ten64-controller";
reg = <0x7e>;
};
};
&i2c2 {
status = "okay";
rx8035: rtc@32 {
compatible = "epson,rx8035";
reg = <0x32>;
};
};
&i2c3 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9540";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
sfpupper_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
sfplower_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
&qspi {
status = "okay";
en25s64: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bl2";
reg = <0 0x100000>;
};
partition@100000 {
label = "bl3";
reg = <0x100000 0x200000>;
};
partition@300000 {
label = "mcfirmware";
reg = <0x300000 0x200000>;
};
partition@500000 {
label = "ubootenv";
reg = <0x500000 0x80000>;
};
partition@580000 {
label = "dpl";
reg = <0x580000 0x40000>;
};
partition@5C0000 {
label = "dpc";
reg = <0x5C0000 0x40000>;
};
partition@600000 {
label = "devicetree";
reg = <0x600000 0x40000>;
};
};
};
nand: flash@1 {
compatible = "spi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <1>;
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* reserved for future boot direct from NAND flash
* (this would use the same layout as the 8MiB NOR flash)
*/
partition@0 {
label = "nand-boot-reserved";
reg = <0 0x800000>;
};
/* recovery / install environment */
partition@800000 {
label = "recovery";
reg = <0x800000 0x2000000>;
};
/* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
partition@2800000 {
label = "ubia";
reg = <0x2800000 0x6C00000>;
};
/* ubib (second OpenWrt) */
partition@9400000 {
label = "ubib";
reg = <0x9400000 0x6C00000>;
};
};
};
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};