u-boot/board/ti/sdp3430/config.mk

#
# (C) Copyright 2006-2009
# Texas Instruments Incorporated, <www.ti.com>
#
# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu
# see http://www.ti.com/ for more information on Texas Instruments
#
# SPDX-License-Identifier:	GPL-2.0+
#
# Physical Address:
# 8000'0000 (bank0)
# A000/0000 (bank1)
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)

# For use with external or internal boots.
CONFIG_SYS_TEXT_BASE = 0x80008000
TI OMAP3 SDP3430: Initial Support Start of support of Texas Instruments Software Development Platform(SDP) for OMAP3430 - SDP3430 Highlights of this platform are: Flash Memory devices: Sibley NOR, Micron 8bit NAND and OneNAND Connectivity: 3 UARTs and expanded 4 UART ports + IrDA Ethernet, USB Other peripherals: TWL5030 PMIC+Audio+Keypad VGA display Expansion ports: Memory devices plugin boards (PISMO) Connectivity board for GPS,WLAN etc. Completely configurable boot sequence and device mapping etc. Support default jumpering and: - UART1/ttyS0 console(legacy sdp3430 u-boot) - UART3/ttyS2 console (matching other boards, and SDP HW docs) - Ethernet - mmc0 - NOR boot Currently the UART1 is enabled by default. for compatibility with other OMAP3 u-boot platforms, enable the #define of CONSOLE_J9. Conflicts: Makefile Fixed the conflict with smdkc100_config by moving omap_sdp3430_config to it is alphabetically sorted location above zoom1. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com> 2009-10-17 17:41:06 +00:00			`#`
			`# (C) Copyright 2006-2009`
			`# Texas Instruments Incorporated, <www.ti.com>`
			`#`
			`# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu`
			`# see http://www.ti.com/ for more information on Texas Instruments`
			`#`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
TI OMAP3 SDP3430: Initial Support Start of support of Texas Instruments Software Development Platform(SDP) for OMAP3430 - SDP3430 Highlights of this platform are: Flash Memory devices: Sibley NOR, Micron 8bit NAND and OneNAND Connectivity: 3 UARTs and expanded 4 UART ports + IrDA Ethernet, USB Other peripherals: TWL5030 PMIC+Audio+Keypad VGA display Expansion ports: Memory devices plugin boards (PISMO) Connectivity board for GPS,WLAN etc. Completely configurable boot sequence and device mapping etc. Support default jumpering and: - UART1/ttyS0 console(legacy sdp3430 u-boot) - UART3/ttyS2 console (matching other boards, and SDP HW docs) - Ethernet - mmc0 - NOR boot Currently the UART1 is enabled by default. for compatibility with other OMAP3 u-boot platforms, enable the #define of CONSOLE_J9. Conflicts: Makefile Fixed the conflict with smdkc100_config by moving omap_sdp3430_config to it is alphabetically sorted location above zoom1. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com> 2009-10-17 17:41:06 +00:00			`#`
			`# Physical Address:`
			`# 8000'0000 (bank0)`
			`# A000/0000 (bank1)`
			`# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000`
			`# (mem base + reserved)`

			`# For use with external or internal boots.`
OMAP3: SDP3430: Fix ARM relocation support Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 2010-11-30 16:10:40 +00:00			`CONFIG_SYS_TEXT_BASE = 0x80008000`