u-boot/board/xilinx/bootscripts/sdboot.cmd

# This is an example file to generate boot.scr - a boot script for U-Boot
# This example only target for qspi boot, sameway it can be created for boot
# devices like nand.
# Generate boot.scr:
# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr
#
# It requires a list of environment variables used below to be defined
# before load
#
mmc dev $devnum && mmcinfo && run uenvboot || run sdroot$devnum;load mmc $devnum:$partid $fdt_addr system.dtb && load mmc $devnum:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr
xilinx: Add sd boot command script for reference This patch adds sdboot command script for reference. This can be converetd into uboot script using mkimage and use for booting. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2019-03-27 05:18:33 +00:00			`# This is an example file to generate boot.scr - a boot script for U-Boot`
			`# This example only target for qspi boot, sameway it can be created for boot`
			`# devices like nand.`
			`# Generate boot.scr:`
			`# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr`
			`#`
			`# It requires a list of environment variables used below to be defined`
			`# before load`
			`#`
			`mmc dev $devnum && mmcinfo && run uenvboot \|\| run sdroot$devnum;load mmc $devnum:$partid $fdt_addr system.dtb && load mmc $devnum:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr`