u-boot/arch/arm/cpu/arm1136/mx31/generic.c

220 lines
4.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*/
#include <common.h>
#include <div64.h>
#include <init.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
u32 mfi = GET_PLL_MFI(reg);
s32 mfn = GET_PLL_MFN(reg);
u32 mfd = GET_PLL_MFD(reg);
u32 pd = GET_PLL_PD(reg);
mfi = mfi <= 5 ? 5 : mfi;
mfn = mfn >= 512 ? mfn - 1024 : mfn;
mfd += 1;
pd += 1;
return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
mfd * pd);
}
static u32 mx31_get_mpl_dpdgck_clk(void)
{
u32 infreq;
if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
infreq = MXC_CLK32 * 1024;
else
infreq = MXC_HCLK;
return mx31_decode_pll(readl(CCM_MPCTL), infreq);
}
static u32 mx31_get_mcu_main_clk(void)
{
/* For now we assume mpl_dpdgck_clk == mcu_main_clk
* which should be correct for most boards
*/
return mx31_get_mpl_dpdgck_clk();
}
static u32 mx31_get_ipg_clk(void)
{
u32 freq = mx31_get_mcu_main_clk();
u32 pdr0 = readl(CCM_PDR0);
freq /= GET_PDR0_MAX_PODF(pdr0) + 1;
freq /= GET_PDR0_IPG_PODF(pdr0) + 1;
return freq;
}
/* hsp is the clock for the ipu */
static u32 mx31_get_hsp_clk(void)
{
u32 freq = mx31_get_mcu_main_clk();
u32 pdr0 = readl(CCM_PDR0);
freq /= GET_PDR0_HSP_PODF(pdr0) + 1;
return freq;
}
void mx31_dump_clocks(void)
{
u32 cpufreq = mx31_get_mcu_main_clk();
printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
printf("ipg clock : %dHz\n", mx31_get_ipg_clk());
printf("hsp clock : %dHz\n", mx31_get_hsp_clk());
}
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
case MXC_ARM_CLK:
return mx31_get_mcu_main_clk();
case MXC_IPG_CLK:
case MXC_IPG_PERCLK:
case MXC_CSPI_CLK:
case MXC_UART_CLK:
case MXC_ESDHC_CLK:
case MXC_I2C_CLK:
return mx31_get_ipg_clk();
case MXC_IPU_CLK:
return mx31_get_hsp_clk();
}
return -1;
}
u32 imx_get_uartclk(void)
{
return mxc_get_clock(MXC_UART_CLK);
}
void mx31_gpio_mux(unsigned long mode)
{
unsigned long reg, shift, tmp;
reg = IOMUXC_BASE + (mode & 0x1fc);
shift = (~mode & 0x3) * 8;
tmp = readl(reg);
tmp &= ~(0xff << shift);
tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
writel(tmp, reg);
}
void mx31_set_pad(enum iomux_pins pin, u32 config)
{
u32 field, l, reg;
pin &= IOMUX_PADNUM_MASK;
reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4;
field = (pin + 2) % 3;
l = readl(reg);
l &= ~(0x1ff << (field * 10));
l |= config << (field * 10);
writel(l, reg);
}
void mx31_set_gpr(enum iomux_gp_func gp, char en)
{
u32 l;
struct iomuxc_regs *iomuxc = (struct iomuxc_regs *)IOMUXC_BASE;
l = readl(&iomuxc->gpr);
if (en)
l |= gp;
else
l &= ~gp;
writel(l, &iomuxc->gpr);
}
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs)
{
struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE;
struct mx31_weim_cscr *cscr = &weim->cscr[cs];
writel(weimcs->upper, &cscr->upper);
writel(weimcs->lower, &cscr->lower);
writel(weimcs->additional, &cscr->additional);
}
struct mx3_cpu_type mx31_cpu_type[] = {
{ .srev = 0x00, .v = 0x10 },
{ .srev = 0x10, .v = 0x11 },
{ .srev = 0x11, .v = 0x11 },
{ .srev = 0x12, .v = 0x1F },
{ .srev = 0x13, .v = 0x1F },
{ .srev = 0x14, .v = 0x12 },
{ .srev = 0x15, .v = 0x12 },
{ .srev = 0x28, .v = 0x20 },
{ .srev = 0x29, .v = 0x20 },
};
u32 get_cpu_rev(void)
{
u32 i, srev;
/* read SREV register from IIM module */
struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
srev = readl(&iim->iim_srev);
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev)
return mx31_cpu_type[i].v | (MXC_CPU_MX31 << 12);
return srev | 0x8000;
}
static char *get_reset_cause(void)
{
/* read RCSR register from CCM module */
struct clock_control_regs *ccm =
(struct clock_control_regs *)CCM_BASE;
u32 cause = readl(&ccm->rcsr) & 0x07;
switch (cause) {
case 0x0000:
return "POR";
case 0x0001:
return "RST";
case 0x0002:
return "WDOG";
case 0x0006:
return "JTAG";
case 0x0007:
return "ARM11P power gating";
default:
return "unknown reset";
}
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
u32 srev = get_cpu_rev();
printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
(srev & 0xF0) >> 4, (srev & 0x0F),
((srev & 0x8000) ? " unknown" : ""),
mx31_get_mcu_main_clk() / 1000000);
printf("Reset cause: %s\n", get_reset_cause());
return 0;
}
#endif