u-boot/board/Marvell/openrd/openrd.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2009
 * Net Insight <www.netinsight.net>
 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
 *
 * Based on sheevaplug.h:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 */

#ifndef __OPENRD_BASE_H
#define __OPENRD_BASE_H

#define OPENRD_OE_LOW		(~(1<<28))        /* RS232 / RS485 */
#define OPENRD_OE_HIGH		(~(1<<2))         /* SD / UART1 */
#define OPENRD_OE_VAL_LOW		(0)       /* Sel RS232 */
#define OPENRD_OE_VAL_HIGH		(1 << 2)  /* Sel SD */

/* PHY related */
#define MV88E1116_LED_FCTRL_REG		10
#define MV88E1116_CPRSP_CR3_REG		21
#define MV88E1116_MAC_CTRL_REG		21
#define MV88E1116_PGADR_REG		22
#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)

#endif /* __OPENRD_BASE_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
Revive OpenRD targets Revert commit 7a2c1b13 which dropped OpenRD boards. Assume maintainership of OpenRD. Remove OpenRD from scrapyard. Switch OpenRD to generic board. Switch to Thumb build. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> 2015-10-23 16:06:43 +00:00			`/*`
			`* (C) Copyright 2009`
			`* Net Insight <www.netinsight.net>`
			`* Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>`
			`*`
			`* Based on sheevaplug.h:`
			`* (C) Copyright 2009`
			`* Marvell Semiconductor <www.marvell.com>`
			`* Written-by: Prafulla Wadaskar <prafulla@marvell.com>`
			`*/`

			`#ifndef __OPENRD_BASE_H`
			`#define __OPENRD_BASE_H`

			`#define OPENRD_OE_LOW (~(1<<28)) /* RS232 / RS485 */`
			`#define OPENRD_OE_HIGH (~(1<<2)) /* SD / UART1 */`
			`#define OPENRD_OE_VAL_LOW (0) /* Sel RS232 */`
			`#define OPENRD_OE_VAL_HIGH (1 << 2) /* Sel SD */`

			`/* PHY related */`
			`#define MV88E1116_LED_FCTRL_REG 10`
			`#define MV88E1116_CPRSP_CR3_REG 21`
			`#define MV88E1116_MAC_CTRL_REG 21`
			`#define MV88E1116_PGADR_REG 22`
			`#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)`
			`#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)`

			`#endif /* __OPENRD_BASE_H */`