u-boot/include/configs/zipitz2.h

227 lines
5.9 KiB
C
Raw Normal View History

/*
* Aeronix Zipit Z2 configuration file
*
* Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_SYS_TEXT_BASE 0x0
#undef CONFIG_BOARD_LATE_INIT
#undef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_PREBOOT
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0x40000
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
"if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
"then " \
"source 0xa0000000; " \
"else " \
"bootm 0x50000; " \
"fi; "
#define CONFIG_BOOTARGS \
"console=tty0 console=ttyS2,115200 fbcon=rotate:3"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_TEXT_BASE 0x0
#define CONFIG_LZMA /* LZMA compression support */
#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
* STUART - the lower serial port on Colibri board
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_STUART 1
#define CONFIG_CONS_INDEX 2
#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
*/
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MMC
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
#define CONFIG_CMD_CACHE
/*
* MMC Card Configuration
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#endif
/*
* SPI and LCD
*/
#ifdef CONFIG_CMD_SPI
#define CONFIG_SOFT_SPI
#define CONFIG_LCD
#define CONFIG_LCD_ROTATION
#define CONFIG_PXA_LCD
#define CONFIG_LMS283GF05
#define SPI_DELAY udelay(10)
#define SPI_SDA(val) zipitz2_spi_sda(val)
#define SPI_SCL(val) zipitz2_spi_scl(val)
#define SPI_READ zipitz2_spi_read()
#ifndef __ASSEMBLY__
void zipitz2_spi_sda(int);
void zipitz2_spi_scl(int);
unsigned char zipitz2_spi_read(void);
#endif
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_DEVICE_NULLDEV 1
/*
* Clock Configuration
*/
#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
/*
* SRAM Map
*/
#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */
#define PHYS_SRAM_SIZE 0x00040000 /* 256k */
/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
/*
* NOR FLASH
*/
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
#define CONFIG_SYS_FLASH_PROTECTION
/*
* GPIO settings
*/
#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR1_VAL 0x00000020
#define CONFIG_SYS_GPCR2_VAL 0x00000000
#define CONFIG_SYS_GPCR3_VAL 0x00000000
#define CONFIG_SYS_GPDR0_VAL 0xdafcee00
#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab
#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff
#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a
#define CONFIG_SYS_GPSR0_VAL 0x06080400
#define CONFIG_SYS_GPSR1_VAL 0x007f0000
#define CONFIG_SYS_GPSR2_VAL 0x032a0000
#define CONFIG_SYS_GPSR3_VAL 0x00000180
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0x00511220
#define CONFIG_SYS_CCCR 0x00000190
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8
#define CONFIG_SYS_MSC1_VAL 0x0000ccd1
#define CONFIG_SYS_MSC2_VAL 0x0000b884
#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9
#define CONFIG_SYS_MDREFR_VAL 0x2011a01e
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000001
#define CONFIG_SYS_MCMEM0_VAL 0x00014307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
#define CONFIG_SYS_MCATT0_VAL 0x0001c787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
#define CONFIG_SYS_MCIO0_VAL 0x0001430f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
#include "pxa-common.h"
#endif /* __CONFIG_H */