2015-03-21 02:28:23 +00:00
|
|
|
Overview
|
|
|
|
--------
|
|
|
|
The LS2085A Development System (QDS) is a high-performance computing,
|
|
|
|
evaluation, and development platform that supports the QorIQ LS2085A
|
|
|
|
Layerscape Architecture processor. The LS2085AQDS provides validation and
|
|
|
|
SW development platform for the Freescale LS2085A processor series, with
|
|
|
|
a complete debugging environment.
|
|
|
|
|
|
|
|
LS2085A SoC Overview
|
|
|
|
------------------
|
|
|
|
The LS2085A integrated multicore processor combines eight ARM Cortex-A57
|
|
|
|
processor cores with high-performance data path acceleration logic and network
|
|
|
|
and peripheral bus interfaces required for networking, telecom/datacom,
|
|
|
|
wireless infrastructure, and mil/aerospace applications.
|
|
|
|
|
|
|
|
The LS2085A SoC includes the following function and features:
|
|
|
|
|
|
|
|
- Eight 64-bit ARM Cortex-A57 CPUs
|
|
|
|
- 1 MB platform cache with ECC
|
|
|
|
- Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
|
|
|
|
- One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
|
|
|
|
the AIOP
|
|
|
|
- Data path acceleration architecture (DPAA2) incorporating acceleration for
|
|
|
|
the following functions:
|
|
|
|
- Packet parsing, classification, and distribution (WRIOP)
|
|
|
|
- Queue and Hardware buffer management for scheduling, packet sequencing, and
|
|
|
|
congestion management, buffer allocation and de-allocation (QBMan)
|
|
|
|
- Cryptography acceleration (SEC) at up to 10 Gbps
|
|
|
|
- RegEx pattern matching acceleration (PME) at up to 10 Gbps
|
|
|
|
- Decompression/compression acceleration (DCE) at up to 20 Gbps
|
|
|
|
- Accelerated I/O processing (AIOP) at up to 20 Gbps
|
|
|
|
- QDMA engine
|
|
|
|
- 16 SerDes lanes at up to 10.3125 GHz
|
|
|
|
- Ethernet interfaces
|
|
|
|
- Up to eight 10 Gbps Ethernet MACs
|
|
|
|
- Up to eight 1 / 2.5 Gbps Ethernet MACs
|
|
|
|
- High-speed peripheral interfaces
|
|
|
|
- Four PCIe 3.0 controllers, one supporting SR-IOV
|
|
|
|
- Additional peripheral interfaces
|
|
|
|
- Two serial ATA (SATA 3.0) controllers
|
|
|
|
- Two high-speed USB 3.0 controllers with integrated PHY
|
|
|
|
- Enhanced secure digital host controller (eSDXC/eMMC)
|
|
|
|
- Serial peripheral interface (SPI) controller
|
|
|
|
- Quad Serial Peripheral Interface (QSPI) Controller
|
|
|
|
- Four I2C controllers
|
|
|
|
- Two DUARTs
|
|
|
|
- Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
|
|
|
|
- Support for hardware virtualization and partitioning enforcement
|
|
|
|
- QorIQ platform's trust architecture 3.0
|
|
|
|
- Service processor (SP) provides pre-boot initialization and secure-boot
|
|
|
|
capabilities
|
|
|
|
|
|
|
|
LS2085AQDS board Overview
|
|
|
|
-----------------------
|
|
|
|
- SERDES Connections, 16 lanes supporting:
|
|
|
|
- PCI Express - 3.0
|
|
|
|
- SGMII, SGMII 2.5
|
|
|
|
- QSGMII
|
|
|
|
- SATA 3.0
|
|
|
|
- XAUI
|
|
|
|
- XFI
|
|
|
|
- DDR Controller
|
|
|
|
- Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
|
|
|
|
chip-selects and two DIMM connectors. Support is up to 2133MT/s.
|
|
|
|
- One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
|
|
|
|
and two DIMM connectors. Support is up to 1600MT/s.
|
|
|
|
-IFC/Local Bus
|
|
|
|
- IFC rev. 2.0 implementation supporting Little Endian connection scheme.
|
|
|
|
- One in-socket 128 MB NOR flash 16-bit data bus
|
|
|
|
- One 512 MB NAND flash with ECC support
|
|
|
|
- IFC Test Port
|
|
|
|
- PromJet Port
|
|
|
|
- FPGA connection
|
|
|
|
- USB 3.0
|
|
|
|
- Two high speed USB 3.0 ports
|
|
|
|
- First USB 3.0 port configured as Host with Type-A connector
|
|
|
|
- Second USB 3.0 port configured as OTG with micro-AB connector
|
|
|
|
- SDHC: PCIe x1 Right Angle connector for supporting following cards
|
|
|
|
- 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only
|
|
|
|
- 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only
|
|
|
|
- 4-bit eMMC Card Rev 4.4 (1.8V only)
|
|
|
|
- 8-bit eMMC Card Rev 4.5 (1.8V only)
|
|
|
|
- SD Card Rev 2.0 and Rev 3.0
|
|
|
|
- DSPI: 3 high-speed flash Memory for storage
|
|
|
|
- 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
|
|
|
|
- 8 MB high-speed flash Memory (up to 104 MHz)
|
|
|
|
- 512 MB low-speed flash Memory (up to 40 MHz)
|
|
|
|
- QSPI: via NAND/QSPI Card
|
|
|
|
- 4 I2C controllers
|
|
|
|
- Two SATA onboard connectors
|
|
|
|
- UART
|
|
|
|
- Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to 115.2 Kbit/s
|
|
|
|
- Two DB9 D-Type connectors supporting one Serial port each
|
|
|
|
- ARM JTAG support
|
|
|
|
|
|
|
|
Memory map from core's view
|
|
|
|
----------------------------
|
|
|
|
0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
|
|
|
|
0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
|
|
|
|
0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
|
|
|
|
0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
|
|
|
|
0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
|
|
|
|
0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
|
|
|
|
0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
|
|
|
|
|
|
|
|
Other addresses are either reserved, or not used directly by u-boot.
|
|
|
|
This list should be updated when more addresses are used.
|
|
|
|
|
|
|
|
IFC region map from core's view
|
|
|
|
-------------------------------
|
|
|
|
During boot i.e. IFC Region #1:-
|
|
|
|
0x30000000 - 0x37ffffff : 128MB : NOR flash
|
|
|
|
0x38000000 - 0x3BFFFFFF : 64MB : Promjet
|
|
|
|
0x3C000000 - 0x40000000 : 64MB : FPGA etc
|
|
|
|
|
|
|
|
After relocate to DDR i.e. IFC Region #2:-
|
|
|
|
0x5_1000_0000..0x5_1fff_ffff Memory Hole
|
|
|
|
0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
|
|
|
|
0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
|
|
|
|
0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
|
|
|
|
0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
|
|
|
|
|
|
|
|
Booting Options
|
|
|
|
---------------
|
|
|
|
a) Promjet Boot
|
|
|
|
b) NOR boot
|
|
|
|
c) NAND boot
|
|
|
|
d) SD boot
|
|
|
|
e) QSPI boot
|
2015-05-28 09:24:10 +00:00
|
|
|
|
|
|
|
Environment Variables
|
|
|
|
---------------------
|
|
|
|
- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
|
|
|
|
the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
|
|
|
|
|
|
|
|
- mcmemsize: MC DRAM block size. If this variable is not defined
|
|
|
|
the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
|
|
|
|
|
|
|
|
Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
|
|
|
|
-------------------------------------------------------------------
|
|
|
|
One needs to use appropriate bootargs to boot Linux flavors which do
|
|
|
|
not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
|
|
|
|
below:
|
|
|
|
|
|
|
|
=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
|
|
|
|
earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
|
|
|
|
hugepages=16 mem=2048M'
|
|
|
|
|