u-boot/include/acpi/acpi_device.h

499 lines
16 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Generation of tables for particular device types
*
* Copyright 2019 Google LLC
* Mostly taken from coreboot file of the same name
*/
#ifndef __ACPI_DEVICE_H
#define __ACPI_DEVICE_H
#include <i2c.h>
#include <irq.h>
#include <spi.h>
#include <asm-generic/gpio.h>
#include <linux/bitops.h>
struct acpi_ctx;
struct gpio_desc;
struct irq;
struct udevice;
/* ACPI descriptor values for common descriptors: SERIAL_BUS means I2C */
#define ACPI_DESCRIPTOR_LARGE BIT(7)
#define ACPI_DESCRIPTOR_REGISTER (ACPI_DESCRIPTOR_LARGE | 2)
#define ACPI_DESCRIPTOR_INTERRUPT (ACPI_DESCRIPTOR_LARGE | 9)
#define ACPI_DESCRIPTOR_GPIO (ACPI_DESCRIPTOR_LARGE | 12)
#define ACPI_DESCRIPTOR_SERIAL_BUS (ACPI_DESCRIPTOR_LARGE | 14)
/* Length of a full path to an ACPI device */
#define ACPI_PATH_MAX 30
/* UUID for an I2C _DSM method */
#define ACPI_DSM_I2C_HID_UUID "3cdff6f7-4267-4555-ad05-b30a3d8938de"
/* Values that can be returned for ACPI device _STA method */
enum acpi_dev_status {
ACPI_DSTATUS_PRESENT = BIT(0),
ACPI_DSTATUS_ENABLED = BIT(1),
ACPI_DSTATUS_SHOW_IN_UI = BIT(2),
ACPI_DSTATUS_OK = BIT(3),
ACPI_DSTATUS_HAS_BATTERY = BIT(4),
ACPI_DSTATUS_ALL_OFF = 0,
ACPI_DSTATUS_HIDDEN_ON = ACPI_DSTATUS_PRESENT | ACPI_DSTATUS_ENABLED |
ACPI_DSTATUS_OK,
ACPI_DSTATUS_ALL_ON = ACPI_DSTATUS_HIDDEN_ON |
ACPI_DSTATUS_SHOW_IN_UI,
};
/** enum acpi_irq_mode - edge/level trigger mode */
enum acpi_irq_mode {
ACPI_IRQ_EDGE_TRIGGERED,
ACPI_IRQ_LEVEL_TRIGGERED,
};
/**
* enum acpi_irq_polarity - polarity of interrupt
*
* @ACPI_IRQ_ACTIVE_LOW - for ACPI_IRQ_EDGE_TRIGGERED this means falling edge
* @ACPI_IRQ_ACTIVE_HIGH - for ACPI_IRQ_EDGE_TRIGGERED this means rising edge
* @ACPI_IRQ_ACTIVE_BOTH - not meaningful for ACPI_IRQ_EDGE_TRIGGERED
*/
enum acpi_irq_polarity {
ACPI_IRQ_ACTIVE_LOW,
ACPI_IRQ_ACTIVE_HIGH,
ACPI_IRQ_ACTIVE_BOTH,
};
/**
* enum acpi_irq_shared - whether interrupt is shared or not
*
* @ACPI_IRQ_EXCLUSIVE: only this device uses the interrupt
* @ACPI_IRQ_SHARED: other devices may use this interrupt
*/
enum acpi_irq_shared {
ACPI_IRQ_EXCLUSIVE,
ACPI_IRQ_SHARED,
};
/** enum acpi_irq_wake - indicates whether this interrupt can wake the device */
enum acpi_irq_wake {
ACPI_IRQ_NO_WAKE,
ACPI_IRQ_WAKE,
};
/**
* struct acpi_irq - representation of an ACPI interrupt
*
* @pin: ACPI pin that is monitored for the interrupt
* @mode: Edge/level triggering
* @polarity: Interrupt polarity
* @shared: Whether interrupt is shared or not
* @wake: Whether interrupt can wake the device from sleep
*/
struct acpi_irq {
unsigned int pin;
enum acpi_irq_mode mode;
enum acpi_irq_polarity polarity;
enum acpi_irq_shared shared;
enum acpi_irq_wake wake;
};
/**
* enum acpi_gpio_type - type of the descriptor
*
* @ACPI_GPIO_TYPE_INTERRUPT: GpioInterrupt
* @ACPI_GPIO_TYPE_IO: GpioIo
*/
enum acpi_gpio_type {
ACPI_GPIO_TYPE_INTERRUPT,
ACPI_GPIO_TYPE_IO,
};
/**
* enum acpi_gpio_pull - pull direction
*
* @ACPI_GPIO_PULL_DEFAULT: Use default value for pin
* @ACPI_GPIO_PULL_UP: Pull up
* @ACPI_GPIO_PULL_DOWN: Pull down
* @ACPI_GPIO_PULL_NONE: No pullup/pulldown
*/
enum acpi_gpio_pull {
ACPI_GPIO_PULL_DEFAULT,
ACPI_GPIO_PULL_UP,
ACPI_GPIO_PULL_DOWN,
ACPI_GPIO_PULL_NONE,
};
/**
* enum acpi_gpio_io_restrict - controls input/output of pin
*
* @ACPI_GPIO_IO_RESTRICT_NONE: no restrictions
* @ACPI_GPIO_IO_RESTRICT_INPUT: input only (no output)
* @ACPI_GPIO_IO_RESTRICT_OUTPUT: output only (no input)
* @ACPI_GPIO_IO_RESTRICT_PRESERVE: preserve settings when driver not active
*/
enum acpi_gpio_io_restrict {
ACPI_GPIO_IO_RESTRICT_NONE,
ACPI_GPIO_IO_RESTRICT_INPUT,
ACPI_GPIO_IO_RESTRICT_OUTPUT,
ACPI_GPIO_IO_RESTRICT_PRESERVE,
};
/** enum acpi_gpio_polarity - controls the GPIO polarity */
enum acpi_gpio_polarity {
ACPI_GPIO_ACTIVE_HIGH = 0,
ACPI_GPIO_ACTIVE_LOW = 1,
};
#define ACPI_GPIO_REVISION_ID 1
#define ACPI_GPIO_MAX_PINS 2
/**
* struct acpi_gpio - representation of an ACPI GPIO
*
* @pin_count: Number of pins represented
* @pins: List of pins
* @pin0_addr: Address in memory of the control registers for pin 0. This is
* used when generating ACPI tables
* @type: GPIO type
* @pull: Pullup/pulldown setting
* @resource: Resource name for this GPIO controller
* For GpioInt:
* @interrupt_debounce_timeout: Debounce timeout in units of 10us
* @irq: Interrupt
*
* For GpioIo:
* @output_drive_strength: Drive strength in units of 10uA
* @io_shared; true if GPIO is shared
* @io_restrict: I/O restriction setting
* @polarity: GPIO polarity
*
* Note that GpioIo() doesn't have any means of Active Low / High setting, so a
* _DSD must be provided to mitigate this. This parameter does not make sense
* for GpioInt() since it has its own means to define it.
*
* GpioIo() doesn't properly communicate the initial state of the output pin,
* thus Linux assumes the simple rule:
*
* Pull Bias Polarity Requested...
*
* Implicit x AS IS (assumed firmware configured for us)
* Explicit x (no _DSD) as Pull Bias (Up == High, Down == Low),
* assuming non-active (Polarity = !Pull Bias)
*
* Down Low as low, assuming active
* Down High as low, assuming non-active
* Up Low as high, assuming non-active
* Up High as high, assuming active
*
* GpioIo() can be used as interrupt and in this case the IoRestriction mustn't
* be OutputOnly. It also requires active_low flag from _DSD in cases where it's
* needed (better to always provide than rely on above assumption made on OS
* level).
*/
struct acpi_gpio {
int pin_count;
u16 pins[ACPI_GPIO_MAX_PINS];
ulong pin0_addr;
enum acpi_gpio_type type;
enum acpi_gpio_pull pull;
char resource[ACPI_PATH_MAX];
/* GpioInt */
u16 interrupt_debounce_timeout;
struct acpi_irq irq;
/* GpioIo */
u16 output_drive_strength;
bool io_shared;
enum acpi_gpio_io_restrict io_restrict;
enum acpi_gpio_polarity polarity;
};
/* ACPI Descriptors for Serial Bus interfaces */
#define ACPI_SERIAL_BUS_TYPE_I2C 1
#define ACPI_SERIAL_BUS_TYPE_SPI 2
#define ACPI_I2C_SERIAL_BUS_REVISION_ID 1 /* TODO: upgrade to 2 */
#define ACPI_I2C_TYPE_SPECIFIC_REVISION_ID 1
#define ACPI_SPI_SERIAL_BUS_REVISION_ID 1
#define ACPI_SPI_TYPE_SPECIFIC_REVISION_ID 1
/**
* struct acpi_i2c - representation of an ACPI I2C device
*
* @address: 7-bit or 10-bit I2C address
* @mode_10bit: Which address size is used
* @speed: Bus speed in Hz
* @resource: Resource name for the I2C controller
*/
struct acpi_i2c {
u16 address;
enum i2c_address_mode mode_10bit;
enum i2c_speed_rate speed;
const char *resource;
};
/**
* struct acpi_spi - representation of an ACPI SPI device
*
* @device_select: Chip select used by this device (typically 0)
* @device_select_polarity: Polarity for the device
* @wire_mode: Number of wires used for SPI
* @speed: Bus speed in Hz
* @data_bit_length: Word length for SPI (typically 8)
* @clock_phase: Clock phase to capture data
* @clock_polarity: Bus polarity
* @resource: Resource name for the SPI controller
*/
struct acpi_spi {
u16 device_select;
enum spi_polarity device_select_polarity;
enum spi_wire_mode wire_mode;
unsigned int speed;
u8 data_bit_length;
enum spi_clock_phase clock_phase;
enum spi_polarity clock_polarity;
const char *resource;
};
/**
* struct acpi_i2c_priv - Information read from device tree
*
* This is used by devices which want to specify various pieces of ACPI
* information, including power control. It allows a generic function to
* generate the information for ACPI, based on device-tree properties.
*
* @disable_gpio_export_in_crs: Don't export GPIOs in the CRS
* @reset_gpio: GPIO used to assert reset to the device
* @enable_gpio: GPIO used to enable the device
* @stop_gpio: GPIO used to stop the device
* @irq_gpio: GPIO used for interrupt (if @irq is not used)
* @irq: IRQ used for interrupt (if @irq_gpio is not used)
* @hid: _HID value for device (required)
* @uid: _UID value for device
* @desc: _DDN value for device
* @wake: Wake event, e.g. GPE0_DW1_15; 0 if none
* @property_count: Number of other DSD properties (currently always 0)
* @probed: true set set 'linux,probed' property
* @compat_string: Device tree compatible string to report through ACPI
* @has_power_resource: true if this device has a power resource
* @reset_delay_ms: Delay after de-asserting reset, in ms
* @reset_off_delay_ms: Delay after asserting reset (during power off)
* @enable_delay_ms: Delay after asserting enable
* @enable_off_delay_ms: Delay after de-asserting enable (during power off)
* @stop_delay_ms: Delay after de-aserting stop
* @stop_off_delay_ms: Delay after asserting stop (during power off)
* @hid_desc_reg_offset: HID register offset (for Human Interface Devices)
*/
struct acpi_i2c_priv {
bool disable_gpio_export_in_crs;
struct gpio_desc reset_gpio;
struct gpio_desc enable_gpio;
struct gpio_desc irq_gpio;
struct gpio_desc stop_gpio;
struct irq irq;
const char *hid;
u32 uid;
const char *desc;
u32 wake;
u32 property_count;
bool probed;
const char *compat_string;
bool has_power_resource;
u32 reset_delay_ms;
u32 reset_off_delay_ms;
u32 enable_delay_ms;
u32 enable_off_delay_ms;
u32 stop_delay_ms;
u32 stop_off_delay_ms;
u32 hid_desc_reg_offset;
};
/**
* acpi_device_path() - Get the full path to an ACPI device
*
* This gets the full path in the form XXXX.YYYY.ZZZZ where XXXX is the root
* and ZZZZ is the device. All parent devices are added to the path.
*
* @dev: Device to check
* @buf: Buffer to place the path in (should be ACPI_PATH_MAX long)
* @maxlen: Size of buffer (typically ACPI_PATH_MAX)
* Return: 0 if OK, -ve on error
*/
int acpi_device_path(const struct udevice *dev, char *buf, int maxlen);
/**
* acpi_device_scope() - Get the scope of an ACPI device
*
* This gets the scope which is the full path of the parent device, as per
* acpi_device_path().
*
* @dev: Device to check
* @buf: Buffer to place the path in (should be ACPI_PATH_MAX long)
* @maxlen: Size of buffer (typically ACPI_PATH_MAX)
* Return: 0 if OK, -EINVAL if the device has no parent, other -ve on other
* error
*/
int acpi_device_scope(const struct udevice *dev, char *scope, int maxlen);
/**
* acpi_device_status() - Get the status of a device
*
* This currently just returns ACPI_DSTATUS_ALL_ON. It does not support
* inactive or hidden devices.
*
* @dev: Device to check
* Return: device status, as ACPI_DSTATUS_...
*/
enum acpi_dev_status acpi_device_status(const struct udevice *dev);
/**
* acpi_device_write_interrupt_irq() - Write an interrupt descriptor
*
* This writes an ACPI interrupt descriptor for the given interrupt, converting
* fields as needed.
*
* @ctx: ACPI context pointer
* @req_irq: Interrupt to output
* Return: IRQ pin number if OK, -ve on error
*/
int acpi_device_write_interrupt_irq(struct acpi_ctx *ctx,
const struct irq *req_irq);
/**
* acpi_device_write_gpio() - Write GpioIo() or GpioInt() descriptor
*
* @gpio: GPIO information to write
* Return: GPIO pin number of first GPIO if OK, -ve on error
*/
int acpi_device_write_gpio(struct acpi_ctx *ctx, const struct acpi_gpio *gpio);
/**
* acpi_device_write_gpio_desc() - Write a GPIO to ACPI
*
* This creates a GPIO descriptor for a GPIO, including information ACPI needs
* to use it.
*
* @ctx: ACPI context pointer
* @desc: GPIO to write
* Return: 0 if OK, -ve on error
*/
int acpi_device_write_gpio_desc(struct acpi_ctx *ctx,
const struct gpio_desc *desc);
/**
* acpi_device_write_interrupt_or_gpio() - Write interrupt or GPIO to ACPI
*
* This reads an interrupt from the device tree "interrupts-extended" property,
* if available. If not it reads the first GPIO with the name @prop.
*
* If an interrupt is found, an ACPI interrupt descriptor is written to the ACPI
* output. If not, but if a GPIO is found, a GPIO descriptor is written.
*
* Return: irq or GPIO pin number if OK, -ve if neither an interrupt nor a GPIO
* could be found, or some other error occurred
*/
int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx,
struct udevice *dev, const char *prop);
/**
* acpi_device_write_dsm_i2c_hid() - Write a device-specific method for HID
*
* This writes a DSM for an I2C Human-Interface Device based on the config
* provided
*
* @hid_desc_reg_offset: HID register offset
*/
int acpi_device_write_dsm_i2c_hid(struct acpi_ctx *ctx,
int hid_desc_reg_offset);
/**
* acpi_device_write_i2c_dev() - Write an I2C device to ACPI
*
* This creates a I2cSerialBusV2 descriptor for an I2C device, including
* information ACPI needs to use it.
*
* @ctx: ACPI context pointer
* @dev: I2C device to write
* Return: I2C address of device if OK, -ve on error
*/
int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev);
/**
* acpi_device_write_spi_dev() - Write a SPI device to ACPI
*
* This writes a serial bus descriptor for the SPI device so that ACPI can use
* it
*
* @ctx: ACPI context pointer
* @dev: SPI device to write
* Return: 0 if OK, -ve on error
*/
int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev);
/**
* acpi_device_add_power_res() - Add a basic PowerResource block for a device
*
* This includes GPIOs to control enable, reset and stop operation of the
* device. Each GPIO is optional, but at least one must be provided.
* This can be applied to any device that has power control, so is fairly
* generic.
*
* Reset - Put the device into / take the device out of reset.
* Enable - Enable / disable power to device.
* Stop - Stop / start operation of device.
*
* @ctx: ACPI context pointer
* @tx_state_val: Mask to use to toggle the TX state on the GPIO pin, e,g.
* PAD_CFG0_TX_STATE
* @dw0_read: Name to use to read dw0, e.g. "\\_SB.GPC0"
* @dw0_write: Name to use to read dw0, e.g. "\\_SB.SPC0"
* @reset_gpio: GPIO used to take device out of reset or to put it into reset
* @reset_delay_ms: Delay to be inserted after device is taken out of reset
* (_ON method delay)
* @reset_off_delay_ms: Delay to be inserted after device is put into reset
* (_OFF method delay)
* @enable_gpio: GPIO used to enable device
* @enable_delay_ms: Delay to be inserted after device is enabled
* @enable_off_delay_ms: Delay to be inserted after device is disabled
* (_OFF method delay)
* @stop_gpio: GPIO used to stop operation of device
* @stop_delay_ms: Delay to be inserted after disabling stop (_ON method delay)
* @stop_off_delay_ms: Delay to be inserted after enabling stop.
* (_OFF method delay)
*
* Return: 0 if OK, -ve if at least one GPIO is not provided
*/
int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val,
const char *dw0_read, const char *dw0_write,
const struct gpio_desc *reset_gpio,
uint reset_delay_ms, uint reset_off_delay_ms,
const struct gpio_desc *enable_gpio,
uint enable_delay_ms, uint enable_off_delay_ms,
const struct gpio_desc *stop_gpio,
uint stop_delay_ms, uint stop_off_delay_ms);
/**
* acpi_device_infer_name() - Infer the name from its uclass or parent
*
* Many ACPI devices have a standard name that can be inferred from the uclass
* they are in, or the uclass of their parent. These rules are implemented in
* this function. It attempts to produce a name for a device based on these
* rules.
*
* NOTE: This currently supports only x86 devices. Feel free to enhance it for
* other architectures as needed.
*
* @dev: Device to check
* @out_name: Place to put the name (must hold ACPI_NAME_MAX bytes)
* Return: 0 if a name was found, -ENOENT if not found, -ENXIO if the device
* sequence number could not be determined
*/
int acpi_device_infer_name(const struct udevice *dev, char *out_name);
#endif