u-boot/board/work-microwave/work_92105/Kconfig

if TARGET_WORK_92105

config SYS_BOARD
	default "work_92105"

config SYS_VENDOR
	default "work-microwave"

config SYS_SOC
	default "lpc32xx"

config SYS_CONFIG_NAME
	default "work_92105"

config CMD_HD44760
	bool "Enable 'hd44780' LCD-control comand"
	help
	  This controls the LCD driver.

endif
$Albert ARIBAUD \(3ADEV\)$ lpc32xx: add support for board work_92105 Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:51 +00:00			`if TARGET_WORK_92105`

			`config SYS_BOARD`
			`default "work_92105"`

			`config SYS_VENDOR`
			`default "work-microwave"`

			`config SYS_SOC`
			`default "lpc32xx"`

			`config SYS_CONFIG_NAME`
			`default "work_92105"`

Convert CONFIG_CMD_HD44760 to Kconfig This converts the following to Kconfig: CONFIG_CMD_HD44760 Also drop CONFIG_CMD_HD44780 which appears to be a typo. Signed-off-by: Simon Glass <sjg@chromium.org> 2017-05-17 09:25:27 +00:00			`config CMD_HD44760`
			`bool "Enable 'hd44780' LCD-control comand"`
			`help`
			`This controls the LCD driver.`

$Albert ARIBAUD \(3ADEV\)$ lpc32xx: add support for board work_92105 Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:51 +00:00			`endif`