u-boot/include/configs/efi-x86_payload.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <configs/x86-common.h>

#define CONFIG_SYS_MONITOR_LEN		(1 << 20)

#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd,usbkbd\0" \
					"stdout=serial,vidconsole\0" \
					"stderr=serial,vidconsole\0"

/* ATA/IDE support */
#define CONFIG_SYS_IDE_MAXBUS		2
#define CONFIG_SYS_IDE_MAXDEVICE	4
#define CONFIG_SYS_ATA_BASE_ADDR	0
#define CONFIG_SYS_ATA_DATA_OFFSET	0
#define CONFIG_SYS_ATA_REG_OFFSET	0
#define CONFIG_SYS_ATA_ALT_OFFSET	0
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
#define CONFIG_ATAPI

#endif	/* __CONFIG_H */
x86: Add generic EFI payload support It is possible to create a generic EFI payload for all x86 boards. The payload is configured to include as many generic drivers as possible. All stuff that touches low-level initialization are not allowed as such is the EFI BIOS's responsibility. Platform specific drivers (like gpio, spi, etc) are not included. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-06-12 15:36:18 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
			`/*`
			`* Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>`
			`*/`

			`/*`
			`* board/config.h - configuration options, board specific`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`#include <configs/x86-common.h>`

			`#define CONFIG_SYS_MONITOR_LEN (1 << 20)`

x86: efi-x86_payload: Enable usb keyboard during boot For boards that don't route serial port pins out, it's quite common to attach a USB keyboard as the input device, along with a monitor. However USB is not automatically started in the generic efi payload codes. This uses a payload specific last_stage_init() to start the USB bus, so that a USB keyboard can be used on the U-Boot shell. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-06-17 12:57:53 +00:00			`#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \`
x86: Add generic EFI payload support It is possible to create a generic EFI payload for all x86 boards. The payload is configured to include as many generic drivers as possible. All stuff that touches low-level initialization are not allowed as such is the EFI BIOS's responsibility. Platform specific drivers (like gpio, spi, etc) are not included. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-06-12 15:36:18 +00:00			`"stdout=serial,vidconsole\0" \`
			`"stderr=serial,vidconsole\0"`

			`/* ATA/IDE support */`
			`#define CONFIG_SYS_IDE_MAXBUS 2`
			`#define CONFIG_SYS_IDE_MAXDEVICE 4`
			`#define CONFIG_SYS_ATA_BASE_ADDR 0`
			`#define CONFIG_SYS_ATA_DATA_OFFSET 0`
			`#define CONFIG_SYS_ATA_REG_OFFSET 0`
			`#define CONFIG_SYS_ATA_ALT_OFFSET 0`
			`#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0`
			`#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170`
			`#define CONFIG_ATAPI`

			`#endif /* __CONFIG_H */`