u-boot/arch/arm/mach-uniphier/clk/Makefile

# SPDX-License-Identifier: GPL-2.0+

ifdef CONFIG_SPL_BUILD

obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= clk-early-ld4.o clk-dram-ld4.o dpll-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= clk-early-ld4.o clk-dram-ld4.o dpll-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= clk-early-ld4.o clk-dram-ld4.o dpll-sld8.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= clk-early-ld4.o clk-dram-pro5.o dpll-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o

else

obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= clk-ld4.o pll-ld4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= clk-pro4.o pll-pro4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= clk-ld4.o pll-ld4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= clk-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= clk-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= clk-ld11.o pll-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= clk-ld20.o pll-ld20.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= clk-pxs3.o pll-pxs3.o

endif

obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= pll-base-ld20.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= pll-base-ld20.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= pll-base-ld20.o
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com> 2015-11-10 01:06:16 +00:00
ARM: uniphier: collect clock/PLL init code into a single directory Now PLLs for DRAM controller are initialized in SPL, and the others in U-Boot proper. Setting up all of them in a single directory will be helpful when we want to share code between SPL and U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-16 18:33:10 +00:00			`ifdef CONFIG_SPL_BUILD`

ARM: uniphier: remove sLD3 SoC support This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2017-08-13 00:01:13 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-early-ld4.o clk-dram-ld4.o dpll-ld4.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-early-ld4.o clk-dram-ld4.o dpll-pro4.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-early-ld4.o clk-dram-ld4.o dpll-sld8.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-early-ld4.o clk-dram-pro5.o dpll-pro5.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o`
ARM: uniphier: collect clock/PLL init code into a single directory Now PLLs for DRAM controller are initialized in SPL, and the others in U-Boot proper. Setting up all of them in a single directory will be helpful when we want to share code between SPL and U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-16 18:33:10 +00:00
			`else`

ARM: uniphier: move PLL init code to U-Boot proper where possible The PLL for the DRAM interface must be initialized in SPL, but the others can be delayed until U-Boot proper. Move them from SPL to U-Boot proper to save the precious SPL memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-16 18:33:09 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o pll-ld4.o dpll-tail.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o pll-pro4.o dpll-tail.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o pll-ld4.o dpll-tail.o`
ARM: uniphier: drop PH1- prefix from CONFIG options and file names The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-03-18 07:41:43 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o`
			`obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o`
ARM: uniphier: add PLL init code for LD11 SoC - Initialize PLLs (SPL initializes only DPLL to save the precious SPL memory footprint) - Adjust CPLL/MPLL to the final tape-out frequency - Set the Cortex-A53 clock to the maximum frequency since it is running at 500MHz (SPLL/4) on startup Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-21 22:42:19 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-ld11.o pll-ld11.o`
ARM: uniphier: deassert RST_n of eMMC device for LD11/LD20 For LD11 and LD20 SoCs, the RST_n pin is asserted by default. If the EXT_CSD[162], bit[1:0] (RST_n_ENABLE) is fused, the eMMC device would stay in the reset state until its RST_n pin is deasserted by software. Currently, this is cared by an ad-hoc way because the eMMC hardware reset provider is not supported in U-Boot for now. This code should be re-written once the "mmc-pwrseq-emmc" binding is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2017-02-17 07:17:22 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-ld20.o pll-ld20.o`
ARM: uniphier: add more init code for PXs3 Add the boot device table and reset deassertion for eMMC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2017-05-15 05:26:33 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += clk-pxs3.o pll-pxs3.o`
ARM: uniphier: collect clock/PLL init code into a single directory Now PLLs for DRAM controller are initialized in SPL, and the others in U-Boot proper. Setting up all of them in a single directory will be helpful when we want to share code between SPL and U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-16 18:33:10 +00:00
			`endif`
ARM: uniphier: add PLL init code for LD20 SoC Initialize the DPLL (PLL for DRAM) in SPL, and others in U-Boot proper. Split the common code into pll-base-ld20.c for easier re-use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-16 18:33:11 +00:00
ARM: uniphier: add PLL init code for LD11 SoC - Initialize PLLs (SPL initializes only DPLL to save the precious SPL memory footprint) - Adjust CPLL/MPLL to the final tape-out frequency - Set the Cortex-A53 clock to the maximum frequency since it is running at 500MHz (SPLL/4) on startup Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-21 22:42:19 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_LD11) += pll-base-ld20.o`
ARM: uniphier: add PLL init code for LD20 SoC Initialize the DPLL (PLL for DRAM) in SPL, and others in U-Boot proper. Split the common code into pll-base-ld20.c for easier re-use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-09-16 18:33:11 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_LD20) += pll-base-ld20.o`
ARM: uniphier: compile pll-base-ld20.c for PXs3 Fix the link error for the combination of CONFIG_ARCH_UNIPHIER_LD11=n CONFIG_ARCH_UNIPHIER_LD20=n CONFIG_ARCH_UNIPHIER_PXS3=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2017-12-06 04:16:45 +00:00			`obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += pll-base-ld20.o`