mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 00:49:43 +00:00
429 lines
13 KiB
C
429 lines
13 KiB
C
|
/*
|
||
|
* Copyright 2011-2012 Freescale Semiconductor, Inc.
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* BSC9131 RDB board configuration file
|
||
|
*/
|
||
|
|
||
|
#ifndef __CONFIG_H
|
||
|
#define __CONFIG_H
|
||
|
|
||
|
#ifdef CONFIG_BSC9131RDB
|
||
|
#define CONFIG_BSC9131
|
||
|
#define CONFIG_NAND_FSL_IFC
|
||
|
#endif
|
||
|
|
||
|
#ifdef CONFIG_SPIFLASH
|
||
|
#define CONFIG_RAMBOOT_SPIFLASH
|
||
|
#define CONFIG_SYS_RAMBOOT
|
||
|
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||
|
#define CONFIG_SYS_TEXT_BASE 0x11000000
|
||
|
#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
|
||
|
#endif
|
||
|
|
||
|
#ifndef CONFIG_SYS_MONITOR_BASE
|
||
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
||
|
#endif
|
||
|
|
||
|
/* High Level Configuration Options */
|
||
|
#define CONFIG_BOOKE /* BOOKE */
|
||
|
#define CONFIG_E500 /* BOOKE e500 family */
|
||
|
#define CONFIG_MPC85xx /* MPC8540/60/55/41/48/P1020/P2020/P1010,etc*/
|
||
|
#define CONFIG_FSL_IFC /* Enable IFC Support */
|
||
|
|
||
|
#define CONFIG_FSL_LAW /* Use common FSL init code */
|
||
|
#define CONFIG_TSEC_ENET
|
||
|
#define CONFIG_ENV_OVERWRITE
|
||
|
|
||
|
#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */
|
||
|
#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */
|
||
|
|
||
|
#define CONFIG_HWCONFIG
|
||
|
/*
|
||
|
* These can be toggled for performance analysis, otherwise use default.
|
||
|
*/
|
||
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||
|
#define CONFIG_BTB /* enable branch predition */
|
||
|
|
||
|
#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
|
||
|
#define CONFIG_SYS_MEMTEST_END 0x01ffffff
|
||
|
|
||
|
/* DDR Setup */
|
||
|
#define CONFIG_FSL_DDR3
|
||
|
#undef CONFIG_SYS_DDR_RAW_TIMING
|
||
|
#undef CONFIG_DDR_SPD
|
||
|
#define CONFIG_SYS_SPD_BUS_NUM 0
|
||
|
#define SPD_EEPROM_ADDRESS 0x52 /* I2C access */
|
||
|
|
||
|
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
||
|
|
||
|
#ifndef __ASSEMBLY__
|
||
|
extern unsigned long get_sdram_size(void);
|
||
|
#endif
|
||
|
#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
|
||
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
||
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
||
|
|
||
|
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
||
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
||
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
|
||
|
|
||
|
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
|
||
|
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
|
||
|
#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
|
||
|
|
||
|
#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
|
||
|
#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
|
||
|
#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
|
||
|
#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
|
||
|
|
||
|
#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
|
||
|
#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
|
||
|
#define CONFIG_SYS_DDR_RCW_1 0x00000000
|
||
|
#define CONFIG_SYS_DDR_RCW_2 0x00000000
|
||
|
#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
|
||
|
#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
|
||
|
#define CONFIG_SYS_DDR_TIMING_4 0x00000001
|
||
|
#define CONFIG_SYS_DDR_TIMING_5 0x02401400
|
||
|
|
||
|
#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
|
||
|
#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
|
||
|
#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
|
||
|
#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cf
|
||
|
#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
|
||
|
#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
|
||
|
#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000
|
||
|
#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
|
||
|
#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
|
||
|
|
||
|
/*
|
||
|
* Base addresses -- Note these are effective addresses where the
|
||
|
* actual resources get mapped (not physical addresses)
|
||
|
*/
|
||
|
/* relocated CCSRBAR */
|
||
|
#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
|
||
|
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
|
||
|
|
||
|
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */
|
||
|
/* CONFIG_SYS_IMMR */
|
||
|
|
||
|
/*
|
||
|
* Memory map
|
||
|
*
|
||
|
* 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable
|
||
|
* 0x8800_0000 0x8810_0000 IFC internal SRAM 1M
|
||
|
* 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M
|
||
|
* 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K
|
||
|
* 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K
|
||
|
* 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K
|
||
|
* 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
|
||
|
* 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* IFC Definitions
|
||
|
*/
|
||
|
#define CONFIG_SYS_NO_FLASH
|
||
|
|
||
|
/* NAND Flash on IFC */
|
||
|
#define CONFIG_SYS_NAND_BASE 0xff800000
|
||
|
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
|
||
|
|
||
|
#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
||
|
| CSPR_PORT_SIZE_8 /* Port Size = 8 bit*/ \
|
||
|
| CSPR_MSEL_NAND /* MSEL = NAND */ \
|
||
|
| CSPR_V)
|
||
|
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
|
||
|
|
||
|
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
|
||
|
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
|
||
|
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
|
||
|
| CSOR_NAND_RAL_2 /* RAL = 2Byes */ \
|
||
|
| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
|
||
|
| CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
|
||
|
| CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
|
||
|
|
||
|
/* NAND Flash Timing Params */
|
||
|
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x08) \
|
||
|
| FTIM0_NAND_TWP(0x06) \
|
||
|
| FTIM0_NAND_TWCHT(0x03) \
|
||
|
| FTIM0_NAND_TWH(0x04))
|
||
|
#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x18) \
|
||
|
| FTIM1_NAND_TWBE(0x23) \
|
||
|
| FTIM1_NAND_TRR(0x08) \
|
||
|
| FTIM1_NAND_TRP(0x05))
|
||
|
#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \
|
||
|
| FTIM2_NAND_TREH(0x04) \
|
||
|
| FTIM2_NAND_TWHRE(0x3f))
|
||
|
#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x22)
|
||
|
|
||
|
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
||
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||
|
#define CONFIG_MTD_NAND_VERIFY_WRITE
|
||
|
#define CONFIG_CMD_NAND
|
||
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
||
|
|
||
|
#define CONFIG_SYS_NAND_DDR_LAW 11
|
||
|
|
||
|
/* Set up IFC registers for boot location NAND */
|
||
|
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
|
||
|
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
|
||
|
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
|
||
|
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||
|
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||
|
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||
|
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||
|
|
||
|
#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
|
||
|
|
||
|
#define CONFIG_SYS_INIT_RAM_LOCK
|
||
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
|
||
|
#define CONFIG_SYS_INIT_RAM_END 0x00004000/* End of used area in RAM */
|
||
|
|
||
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
|
||
|
- GENERATED_GBL_DATA_SIZE)
|
||
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||
|
|
||
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/
|
||
|
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
|
||
|
|
||
|
/* Serial Port */
|
||
|
#define CONFIG_CONS_INDEX 1
|
||
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||
|
#define CONFIG_SYS_NS16550
|
||
|
#define CONFIG_SYS_NS16550_SERIAL
|
||
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||
|
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
||
|
|
||
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
|
||
|
|
||
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||
|
|
||
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
|
||
|
|
||
|
/* Use the HUSH parser */
|
||
|
#define CONFIG_SYS_HUSH_PARSER
|
||
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
||
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||
|
#endif
|
||
|
|
||
|
/*
|
||
|
* Pass open firmware flat tree
|
||
|
*/
|
||
|
#define CONFIG_OF_LIBFDT
|
||
|
#define CONFIG_OF_BOARD_SETUP
|
||
|
#define CONFIG_OF_STDOUT_VIA_ALIAS
|
||
|
|
||
|
/* new uImage format support */
|
||
|
#define CONFIG_FIT
|
||
|
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
|
||
|
|
||
|
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
|
||
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
||
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||
|
#define CONFIG_I2C_MULTI_BUS
|
||
|
#define CONFIG_I2C_CMD_TREE
|
||
|
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
|
||
|
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||
|
|
||
|
/* I2C EEPROM */
|
||
|
#define CONFIG_CMD_EEPROM
|
||
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS
|
||
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
||
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
||
|
|
||
|
#define CONFIG_CMD_I2C
|
||
|
|
||
|
|
||
|
#define CONFIG_FSL_ESPI
|
||
|
/* eSPI - Enhanced SPI */
|
||
|
#ifdef CONFIG_FSL_ESPI
|
||
|
#define CONFIG_SPI_FLASH
|
||
|
#define CONFIG_SPI_FLASH_SPANSION
|
||
|
#define CONFIG_CMD_SF
|
||
|
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
||
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||
|
#endif
|
||
|
|
||
|
#if defined(CONFIG_TSEC_ENET)
|
||
|
|
||
|
#define CONFIG_MII /* MII PHY management */
|
||
|
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
|
||
|
#define CONFIG_TSEC1 1
|
||
|
#define CONFIG_TSEC1_NAME "eTSEC1"
|
||
|
#define CONFIG_TSEC2 1
|
||
|
#define CONFIG_TSEC2_NAME "eTSEC2"
|
||
|
|
||
|
#define TSEC1_PHY_ADDR 0
|
||
|
#define TSEC2_PHY_ADDR 3
|
||
|
|
||
|
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
||
|
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
||
|
|
||
|
#define TSEC1_PHYIDX 0
|
||
|
|
||
|
#define TSEC2_PHYIDX 0
|
||
|
|
||
|
#define CONFIG_ETHPRIME "eTSEC1"
|
||
|
|
||
|
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
|
||
|
|
||
|
#endif /* CONFIG_TSEC_ENET */
|
||
|
|
||
|
/*
|
||
|
* Environment
|
||
|
*/
|
||
|
#if defined(CONFIG_SYS_RAMBOOT)
|
||
|
#if defined(CONFIG_RAMBOOT_SPIFLASH)
|
||
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||
|
#define CONFIG_ENV_SPI_BUS 0
|
||
|
#define CONFIG_ENV_SPI_CS 0
|
||
|
#define CONFIG_ENV_SPI_MAX_HZ 10000000
|
||
|
#define CONFIG_ENV_SPI_MODE 0
|
||
|
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
|
||
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
#else
|
||
|
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
|
||
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
#endif
|
||
|
#else
|
||
|
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||
|
#define CONFIG_ENV_SIZE 0x400
|
||
|
#endif
|
||
|
|
||
|
#define CONFIG_LOADS_ECHO /* echo on for serial download */
|
||
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
|
||
|
|
||
|
/*
|
||
|
* Command line configuration.
|
||
|
*/
|
||
|
#include <config_cmd_default.h>
|
||
|
|
||
|
#define CONFIG_CMD_DHCP
|
||
|
#define CONFIG_CMD_ERRATA
|
||
|
#define CONFIG_CMD_ELF
|
||
|
#define CONFIG_CMD_EXT2
|
||
|
#define CONFIG_CMD_FAT
|
||
|
#define CONFIG_CMD_IRQ
|
||
|
#define CONFIG_CMD_MII
|
||
|
#define CONFIG_DOS_PARTITION
|
||
|
#define CONFIG_CMD_PING
|
||
|
#define CONFIG_CMD_REGINFO
|
||
|
#define CONFIG_CMD_SETEXPR
|
||
|
|
||
|
/*
|
||
|
* Miscellaneous configurable options
|
||
|
*/
|
||
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||
|
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
|
||
|
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
|
||
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||
|
|
||
|
#if defined(CONFIG_CMD_KGDB)
|
||
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||
|
#else
|
||
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||
|
#endif
|
||
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||
|
/* Print Buffer Size */
|
||
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
|
||
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||
|
|
||
|
/*
|
||
|
* For booting Linux, the board info and command line data
|
||
|
* have to be in the first 64 MB of memory, since this is
|
||
|
* the maximum mapped by the Linux kernel during initialization.
|
||
|
*/
|
||
|
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
|
||
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
||
|
|
||
|
#if defined(CONFIG_CMD_KGDB)
|
||
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||
|
#endif
|
||
|
|
||
|
#define CONFIG_USB_EHCI
|
||
|
|
||
|
#ifdef CONFIG_USB_EHCI
|
||
|
#define CONFIG_CMD_USB
|
||
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||
|
#define CONFIG_USB_EHCI_FSL
|
||
|
#define CONFIG_USB_STORAGE
|
||
|
#define CONFIG_HAS_FSL_DR_USB
|
||
|
#endif
|
||
|
|
||
|
/*
|
||
|
* Environment Configuration
|
||
|
*/
|
||
|
|
||
|
#if defined(CONFIG_TSEC_ENET)
|
||
|
#define CONFIG_HAS_ETH0
|
||
|
#endif
|
||
|
|
||
|
#define CONFIG_HOSTNAME BSC9131rdb
|
||
|
#define CONFIG_ROOTPATH "/opt/nfsroot"
|
||
|
#define CONFIG_BOOTFILE "uImage"
|
||
|
#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
|
||
|
|
||
|
#define CONFIG_BAUDRATE 115200
|
||
|
|
||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||
|
"netdev=eth0\0" \
|
||
|
"uboot=" CONFIG_UBOOTPATH "\0" \
|
||
|
"loadaddr=1000000\0" \
|
||
|
"bootfile=uImage\0" \
|
||
|
"consoledev=ttyS0\0" \
|
||
|
"ramdiskaddr=2000000\0" \
|
||
|
"ramdiskfile=rootfs.ext2.gz.uboot\0" \
|
||
|
"fdtaddr=c00000\0" \
|
||
|
"fdtfile=bsc9131rdb.dtb\0" \
|
||
|
"bdev=sda1\0" \
|
||
|
"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
|
||
|
"othbootargs=ramdisk_size=600000 \0" \
|
||
|
"usbext2boot=setenv bootargs root=/dev/ram rw " \
|
||
|
"console=$consoledev,$baudrate $othbootargs; " \
|
||
|
"usb start;" \
|
||
|
"ext2load usb 0:4 $loadaddr $bootfile;" \
|
||
|
"ext2load usb 0:4 $fdtaddr $fdtfile;" \
|
||
|
"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
|
||
|
"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
|
||
|
|
||
|
#define CONFIG_RAMBOOTCOMMAND \
|
||
|
"setenv bootargs root=/dev/ram rw " \
|
||
|
"console=$consoledev,$baudrate $othbootargs; " \
|
||
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
||
|
"tftp $loadaddr $bootfile;" \
|
||
|
"tftp $fdtaddr $fdtfile;" \
|
||
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||
|
|
||
|
#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
|
||
|
|
||
|
#endif /* __CONFIG_H */
|