Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 02:08:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/qemu_arm_defconfig

42 lines
856 B
Text
Raw Normal View History

ARM: Add a new arch + board for QEMU's 'virt' machine This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-19 20:18:07 +00:00
CONFIG_ARM=y
CONFIG_ARM_SMCCC=y
CONFIG_ARCH_QEMU=y
ARM: qemu-arm: Add support for AArch64 This adds support for '-machine virt' on AArch64. This is rather simple: we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig symbols, provide the ARMv8 memory map from the board file and add a new defconfig based on the 32-bit defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-11 14:11:23 +00:00
CONFIG_TARGET_QEMU_ARM_32BIT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=1
ARM: Add a new arch + board for QEMU's 'virt' machine This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-19 20:18:07 +00:00
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 02:51:14 +00:00
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="pci enum"
ARM: Add a new arch + board for QEMU's 'virt' machine This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-19 20:18:07 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
efi_selftest: test qemu-arm(64)_defconfig We should run the EFI selftest on both a 32bit and a 64bit ARM platform on Travis to catch possible errors. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 02:25:12 +00:00
CONFIG_CMD_BOOTEFI_SELFTEST=y
efi_loader: enable CONFIG_CMD_NVEDIT_EFI on QEMU To reduce the default image size CONFIG_CMD_NVEDIT_EFI was disabled by default. Re-enable it on the QEMU platforms supporting the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-13 09:54:20 +00:00
CONFIG_CMD_NVEDIT_EFI=y
ARM: Add a new arch + board for QEMU's 'virt' machine This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-19 20:18:07 +00:00
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_OF_BOARD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-07 22:46:19 +00:00
CONFIG_ENV_IS_IN_FLASH=y
ata: Migrate CONFIG_SCSI_AHCI to Kconfig And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-08 13:36:19 +00:00
CONFIG_SCSI_AHCI=y
ARM: Add a new arch + board for QEMU's 'virt' machine This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-19 20:18:07 +00:00
CONFIG_AHCI_PCI=y
CONFIG_BLK=y
# CONFIG_MMC is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-07 22:46:19 +00:00
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CFI_FLASH=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
ARM: Add a new arch + board for QEMU's 'virt' machine This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-19 20:18:07 +00:00
CONFIG_DM_ETH=y
CONFIG_E1000=y
CONFIG_NVME=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PCIE_ECAM_GENERIC=y
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_PCI=y
Reference in a new issue Copy permalink