Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 10:48:51 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/mx23evk/spl_boot.c

136 lines
4.9 KiB
C
Raw Normal View History

mx23evk: Add initial board support The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-23 10:30:34 +00:00
/*
* Freescale MX23EVK Boot setup
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-08 07:37:19 +00:00
* SPDX-License-Identifier: GPL-2.0+
mx23evk: Add initial board support The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-23 10:30:34 +00:00
*/
#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx23.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
mx23evk: Do not set voltage selection bit for SSP pads mx23 SSP pad registers do not contain voltage selection bit, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-05 15:52:55 +00:00
#define MUX_CONFIG_SSP1 (MXS_PAD_8MA | MXS_PAD_PULLUP)
mx23evk: Fix DDR pin iomux settings Change MUX_CONFIG_EMI to use the same drive strength as the bootlets code from Freescale, which results in much better stability. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-03 04:37:08 +00:00
#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
mx23evk: Add splash screen support Enable display support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-10 09:14:10 +00:00
#define MUX_CONFIG_LCD (MXS_PAD_4MA | MXS_PAD_NOPULL)
mx23evk: Add initial board support The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-23 10:30:34 +00:00
const iomux_cfg_t iomux_setup[] = {
/* DUART */
MX23_PAD_PWM0__DUART_RX,
MX23_PAD_PWM1__DUART_TX,
/* EMI */
MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI,
MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI,
MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
/* MMC 0 */
MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP1,
MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP1,
MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP1,
MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP1,
MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP1,
MX23_PAD_SSP1_DETECT__SSP1_DETECT | MUX_CONFIG_SSP1,
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX23_PAD_SSP1_SCK__SSP1_SCK |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* Write Protect Pin */
MX23_PAD_PWM4__GPIO_1_30 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* Slot Power Enable */
MX23_PAD_PWM3__GPIO_1_29 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
mx23evk: Add splash screen support Enable display support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-10 09:14:10 +00:00
/* LCD */
MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
MX23_PAD_GPMI_D08__LCD_D18 | MUX_CONFIG_LCD,
MX23_PAD_GPMI_D09__LCD_D19 | MUX_CONFIG_LCD,
MX23_PAD_GPMI_D10__LCD_D20 | MUX_CONFIG_LCD,
MX23_PAD_GPMI_D11__LCD_D21 | MUX_CONFIG_LCD,
MX23_PAD_GPMI_D12__LCD_D22 | MUX_CONFIG_LCD,
MX23_PAD_GPMI_D13__LCD_D23 | MUX_CONFIG_LCD,
MX23_PAD_LCD_DOTCK__LCD_DOTCK | MUX_CONFIG_LCD,
MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
MX23_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
MX23_PAD_LCD_RESET__GPIO_1_18 | MUX_CONFIG_LCD, /* LCD power */
MX23_PAD_PWM2__GPIO_1_28 | MUX_CONFIG_LCD, /* LCD contrast */
mx23evk: Add initial board support The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-23 10:30:34 +00:00
};
mx23evk: Adjust DRAM control register to use full 128MB of RAM Adjust HW_DRAM_CTL14 to enable the chip selects to allow usage of full 128MB of RAM. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-02-23 02:43:06 +00:00
#define HW_DRAM_CTL14 (0x38 >> 2)
#define CS_MAP 0x3
#define INTAREF 0x2
#define HW_DRAM_CTL14_CONFIG (INTAREF << 8 | CS_MAP)
void mxs_adjust_memory_params(uint32_t *dram_vals)
{
dram_vals[HW_DRAM_CTL14] = HW_DRAM_CTL14_CONFIG;
}
ARM: mxs: Receive r0 and r1 passed from BootROM Make sure value in register r0 and r1 is preserved and passed to the board_init_ll() and mxs_common_spl_init() where it can be processed further. The value in r0 can be configured during the BootStream generation to arbitary value, r1 contains pointer to return value from CALL'd function. This patch also clears the value in r0 before returning to BootROM to make sure the BootROM is not confused by this value. Finally, this patch cleans up some comments in the start.S file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-08-31 13:53:44 +00:00
void board_init_ll(const uint32_t arg, const uint32_t *resptr)
mx23evk: Add initial board support The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-23 10:30:34 +00:00
{
ARM: mxs: Receive r0 and r1 passed from BootROM Make sure value in register r0 and r1 is preserved and passed to the board_init_ll() and mxs_common_spl_init() where it can be processed further. The value in r0 can be configured during the BootStream generation to arbitary value, r1 contains pointer to return value from CALL'd function. This patch also clears the value in r0 before returning to BootROM to make sure the BootROM is not confused by this value. Finally, this patch cleans up some comments in the start.S file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2013-08-31 13:53:44 +00:00
mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
mx23evk: Add initial board support The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-23 10:30:34 +00:00
}
Reference in a new issue Copy permalink