u-boot/include/configs/o2i.h

67 lines
2 KiB
C
Raw Normal View History

/*
* (C) Copyright 2012
* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Valid values for CONFIG_SYS_TEXT_BASE are:
* 0xFF000000 boot low boot high (standard configuration)
* 0x00100000 boot from RAM (for testing only)
*/
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */
#endif
/* Board specific flash config */
#define CONFIG_SYS_FLASH_BASE 0xff000000
#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 128
/*
* Include common defines for all ifm boards
*/
#include "o2dnt-common.h"
/* GPIO configuration */
#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002006 /* no CAN */
/* Other board specific configs */
#define CONFIG_SYS_BOOTCS_CFG 0x00087801
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
#define CONFIG_BOARD_NAME "o2i"
#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
#define CONFIG_BOARD_MEM_LIMIT xstr(62)
#define BOARD_POST_CRC32_END xstr(0x01000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_OLD \
CONFIG_IFM_DEFAULT_ENV_NEW \
"linbot=ff060000\0" \
"lintop=ff15ffff\0" \
"rambot=ff160000\0" \
"ramtop=ff55ffff\0" \
"jffbot=ff560000\0" \
"jfftop=ffebffff\0" \
"kernel_addr=0xff060000\0" \
"ramdisk_addr=0xff160000\0" \
"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=ff03ffff\0" \
"autoload=no\0" \
"dhcp_boot=run dhcpcmd; run flash_mtd\0" \
"hostname=IFM_SENSOR\0" \
"flash_mtd=run mtd_args addip addmem;bootm ${kernel_addr}\0" \
"mtd_args=setenv bootargs root=/dev/mtdblock3 " \
"rw rootfstype=cramfs\0" \
"sensorType=O2I100AA\0" \
"netretry=once\0" \
"master=mw f0000b00 0x00052006;mw f0000b0c ${IOpin};" \
"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"