mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 12:03:39 +00:00
408 lines
11 KiB
C
408 lines
11 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Copyright (C) 2020 Marvell International Ltd.
|
||
|
*/
|
||
|
|
||
|
#include <i2c.h>
|
||
|
#include <ram.h>
|
||
|
|
||
|
#include <mach/octeon_ddr.h>
|
||
|
|
||
|
#define DEVICE_TYPE DDR4_SPD_KEY_BYTE_DEVICE_TYPE // same for DDR3 and DDR4
|
||
|
#define MODULE_TYPE DDR4_SPD_KEY_BYTE_MODULE_TYPE // same for DDR3 and DDR4
|
||
|
#define BUS_WIDTH(t) (((t) == DDR4_DRAM) ? \
|
||
|
DDR4_SPD_MODULE_MEMORY_BUS_WIDTH : \
|
||
|
DDR3_SPD_MEMORY_BUS_WIDTH)
|
||
|
|
||
|
/*
|
||
|
* Allow legacy code to encode bus number in the upper bits of the address
|
||
|
* These are only supported in read_spd()
|
||
|
*/
|
||
|
#define OCTEON_TWSI_BUS_IN_ADDR_BIT 12
|
||
|
#define OCTEON_TWSI_BUS_IN_ADDR_MASK (15 << OCTEON_TWSI_BUS_IN_ADDR_BIT)
|
||
|
#define OCTEON_TWSI_GET_BUS(addr) \
|
||
|
(((addr) >> OCTEON_TWSI_BUS_IN_ADDR_BIT) & 0xf)
|
||
|
|
||
|
const char *ddr3_dimm_types[] = {
|
||
|
/* 0000 */ "Undefined",
|
||
|
/* 0001 */ "RDIMM",
|
||
|
/* 0010 */ "UDIMM",
|
||
|
/* 0011 */ "SO-DIMM",
|
||
|
/* 0100 */ "Micro-DIMM",
|
||
|
/* 0101 */ "Mini-RDIMM",
|
||
|
/* 0110 */ "Mini-UDIMM",
|
||
|
/* 0111 */ "Mini-CDIMM",
|
||
|
/* 1000 */ "72b-SO-UDIMM",
|
||
|
/* 1001 */ "72b-SO-RDIMM",
|
||
|
/* 1010 */ "72b-SO-CDIMM"
|
||
|
/* 1011 */ "LRDIMM",
|
||
|
/* 1100 */ "16b-SO-DIMM",
|
||
|
/* 1101 */ "32b-SO-DIMM",
|
||
|
/* 1110 */ "Reserved",
|
||
|
/* 1111 */ "Reserved"
|
||
|
};
|
||
|
|
||
|
const char *ddr4_dimm_types[] = {
|
||
|
/* 0000 */ "Extended",
|
||
|
/* 0001 */ "RDIMM",
|
||
|
/* 0010 */ "UDIMM",
|
||
|
/* 0011 */ "SO-DIMM",
|
||
|
/* 0100 */ "LRDIMM",
|
||
|
/* 0101 */ "Mini-RDIMM",
|
||
|
/* 0110 */ "Mini-UDIMM",
|
||
|
/* 0111 */ "Reserved",
|
||
|
/* 1000 */ "72b-SO-RDIMM",
|
||
|
/* 1001 */ "72b-SO-UDIMM",
|
||
|
/* 1010 */ "Reserved",
|
||
|
/* 1011 */ "Reserved",
|
||
|
/* 1100 */ "16b-SO-DIMM",
|
||
|
/* 1101 */ "32b-SO-DIMM",
|
||
|
/* 1110 */ "Reserved",
|
||
|
/* 1111 */ "Reserved"
|
||
|
};
|
||
|
|
||
|
static u16 ddr3_crc16(u8 *ptr, int count)
|
||
|
{
|
||
|
/* From DDR3 SPD specification */
|
||
|
int crc, i;
|
||
|
|
||
|
crc = 0;
|
||
|
while (--count >= 0) {
|
||
|
crc = crc ^ (int)*ptr++ << 8;
|
||
|
for (i = 0; i < 8; ++i) {
|
||
|
if (crc & 0x8000)
|
||
|
crc = crc << 1 ^ 0x1021;
|
||
|
else
|
||
|
crc = crc << 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return (crc & 0xFFFF);
|
||
|
}
|
||
|
|
||
|
static int validate_spd_checksum_ddr4(struct dimm_config *dimm_config,
|
||
|
int dimm_index, int twsi_addr, int silent)
|
||
|
{
|
||
|
u8 *spd_data = dimm_config->spd_data[dimm_index];
|
||
|
int crc_bytes = 126;
|
||
|
u16 crc_comp;
|
||
|
|
||
|
/* Check byte 0 to see how many bytes checksum is over */
|
||
|
if (spd_data[0] & 0x80)
|
||
|
crc_bytes = 117;
|
||
|
|
||
|
crc_comp = ddr3_crc16(spd_data, crc_bytes);
|
||
|
|
||
|
if (spd_data[126] == (crc_comp & 0xff) &&
|
||
|
spd_data[127] == (crc_comp >> 8))
|
||
|
return 1;
|
||
|
|
||
|
if (!silent) {
|
||
|
printf("DDR4 SPD CRC error, spd addr: 0x%x, calculated crc: 0x%04x, read crc: 0x%02x%02x\n",
|
||
|
twsi_addr, crc_comp, spd_data[127], spd_data[126]);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int validate_spd_checksum(struct ddr_priv *priv,
|
||
|
struct dimm_config *dimm_config,
|
||
|
int dimm_index, int twsi_addr,
|
||
|
int silent, u8 rv)
|
||
|
{
|
||
|
if (ddr_verbose(priv))
|
||
|
debug("Validating DIMM at address 0x%x\n", twsi_addr);
|
||
|
|
||
|
if (rv >= 0x8 && rv <= 0xA)
|
||
|
printf("%s: Error: DDR2 support disabled\n", __func__);
|
||
|
|
||
|
if (rv == 0xB)
|
||
|
printf("%s: Error: DDR3 support disabled\n", __func__);
|
||
|
|
||
|
if (rv == 0xC) {
|
||
|
return validate_spd_checksum_ddr4(dimm_config, dimm_index,
|
||
|
twsi_addr, silent);
|
||
|
}
|
||
|
|
||
|
if (!silent) {
|
||
|
printf("Unrecognized DIMM type: 0x%x at spd address: 0x%x\n",
|
||
|
rv, twsi_addr);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read an DIMM SPD value, either using TWSI to read it from the DIMM, or
|
||
|
* from a provided array.
|
||
|
*/
|
||
|
int read_spd(struct dimm_config *dimm_config, int dimm_index, int spd_field)
|
||
|
{
|
||
|
dimm_index = !!dimm_index;
|
||
|
|
||
|
if (spd_field >= SPD_EEPROM_SIZE) {
|
||
|
printf("ERROR: Trying to read unsupported SPD EEPROM value %d\n",
|
||
|
spd_field);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* If pointer to data is provided, use it, otherwise read from SPD
|
||
|
* over twsi
|
||
|
*/
|
||
|
if (dimm_config->spd_ptrs[dimm_index])
|
||
|
return dimm_config->spd_ptrs[dimm_index][spd_field];
|
||
|
else if (dimm_config->spd_addrs[dimm_index])
|
||
|
return dimm_config->spd_data[dimm_index][spd_field];
|
||
|
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
int read_spd_init(struct dimm_config *dimm_config, int dimm_index)
|
||
|
{
|
||
|
u8 busno = OCTEON_TWSI_GET_BUS(dimm_config->spd_addrs[dimm_index]);
|
||
|
u8 cmdno = dimm_config->spd_addrs[dimm_index];
|
||
|
struct udevice *dev_i2c;
|
||
|
u8 *spd_data;
|
||
|
int ret;
|
||
|
|
||
|
if (dimm_config->spd_cached[dimm_index])
|
||
|
return 0;
|
||
|
|
||
|
dimm_config->spd_cached[dimm_index] = 1;
|
||
|
spd_data = dimm_config->spd_data[dimm_index];
|
||
|
|
||
|
ret = i2c_get_chip_for_busnum(busno, cmdno, 2, &dev_i2c);
|
||
|
if (ret) {
|
||
|
debug("Cannot find SPL EEPROM: %d\n", ret);
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
ret = dm_i2c_read(dev_i2c, 0, spd_data, SPD_EEPROM_SIZE);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
int validate_dimm(struct ddr_priv *priv, struct dimm_config *dimm_config,
|
||
|
int dimm_index)
|
||
|
{
|
||
|
int spd_addr;
|
||
|
|
||
|
dimm_index = !!dimm_index; /* Normalize to 0/1 */
|
||
|
spd_addr = dimm_config->spd_addrs[dimm_index];
|
||
|
|
||
|
debug("Validating dimm %d, spd addr: 0x%02x spd ptr: %p\n",
|
||
|
dimm_index,
|
||
|
dimm_config->spd_addrs[dimm_index],
|
||
|
dimm_config->spd_ptrs[dimm_index]);
|
||
|
|
||
|
/* Only validate 'real' dimms, assume compiled in values are OK */
|
||
|
if (!dimm_config->spd_ptrs[dimm_index]) {
|
||
|
int val0, val1;
|
||
|
int dimm_type;
|
||
|
int ret;
|
||
|
|
||
|
ret = read_spd_init(dimm_config, dimm_index);
|
||
|
if (ret)
|
||
|
return 0;
|
||
|
|
||
|
dimm_type = read_spd(dimm_config, dimm_index,
|
||
|
DDR2_SPD_MEM_TYPE) & 0xff;
|
||
|
switch (dimm_type) {
|
||
|
case 0x0B: /* DDR3 */
|
||
|
if (ddr_verbose(priv))
|
||
|
printf("Validating DDR3 DIMM %d\n", dimm_index);
|
||
|
val0 = read_spd(dimm_config, dimm_index,
|
||
|
DDR3_SPD_DENSITY_BANKS);
|
||
|
val1 = read_spd(dimm_config, dimm_index,
|
||
|
DDR3_SPD_ADDRESSING_ROW_COL_BITS);
|
||
|
if (val0 < 0 && val1 < 0) {
|
||
|
if (ddr_verbose(priv))
|
||
|
printf("Error reading SPD for DIMM %d\n",
|
||
|
dimm_index);
|
||
|
return 0; /* Failed to read dimm */
|
||
|
}
|
||
|
if (val0 == 0xff && val1 == 0xff) {
|
||
|
if (ddr_verbose(priv))
|
||
|
printf("Blank or unreadable SPD for DIMM %d\n",
|
||
|
dimm_index);
|
||
|
/* Blank SPD or otherwise unreadable device */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Don't treat bad checksums as fatal */
|
||
|
validate_spd_checksum(priv, dimm_config, dimm_index,
|
||
|
spd_addr, 0, dimm_type);
|
||
|
break;
|
||
|
|
||
|
case 0x0C: /* DDR4 */
|
||
|
if (ddr_verbose(priv))
|
||
|
printf("Validating DDR4 DIMM %d\n", dimm_index);
|
||
|
val0 = read_spd(dimm_config, dimm_index,
|
||
|
DDR4_SPD_DENSITY_BANKS);
|
||
|
val1 = read_spd(dimm_config, dimm_index,
|
||
|
DDR4_SPD_ADDRESSING_ROW_COL_BITS);
|
||
|
if (val0 < 0 && val1 < 0) {
|
||
|
if (ddr_verbose(priv))
|
||
|
printf("Error reading SPD for DIMM %d\n",
|
||
|
dimm_index);
|
||
|
return 0; /* Failed to read dimm */
|
||
|
}
|
||
|
if (val0 == 0xff && val1 == 0xff) {
|
||
|
if (ddr_verbose(priv)) {
|
||
|
printf("Blank or unreadable SPD for DIMM %d\n",
|
||
|
dimm_index);
|
||
|
}
|
||
|
/* Blank SPD or otherwise unreadable device */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Don't treat bad checksums as fatal */
|
||
|
validate_spd_checksum(priv, dimm_config, dimm_index,
|
||
|
spd_addr, 0, dimm_type);
|
||
|
break;
|
||
|
|
||
|
case 0x00:
|
||
|
/* Terminator detected. Fail silently. */
|
||
|
return 0;
|
||
|
|
||
|
default:
|
||
|
debug("Unknown DIMM type 0x%x for DIMM %d @ 0x%x\n",
|
||
|
dimm_type, dimm_index,
|
||
|
dimm_config->spd_addrs[dimm_index]);
|
||
|
return 0; /* Failed to read dimm */
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
int get_ddr_type(struct dimm_config *dimm_config, int upper_dimm)
|
||
|
{
|
||
|
int spd_ddr_type;
|
||
|
|
||
|
spd_ddr_type = read_spd(dimm_config, upper_dimm, DEVICE_TYPE);
|
||
|
|
||
|
debug("%s:%d spd_ddr_type=0x%02x\n", __func__, __LINE__,
|
||
|
spd_ddr_type);
|
||
|
|
||
|
/* we return only DDR4 or DDR3 */
|
||
|
return (spd_ddr_type == 0x0C) ? DDR4_DRAM : DDR3_DRAM;
|
||
|
}
|
||
|
|
||
|
static int get_dimm_ecc(struct dimm_config *dimm_config, int upper_dimm,
|
||
|
int ddr_type)
|
||
|
{
|
||
|
return !!(read_spd(dimm_config, upper_dimm, BUS_WIDTH(ddr_type)) & 8);
|
||
|
}
|
||
|
|
||
|
int get_dimm_module_type(struct dimm_config *dimm_config, int upper_dimm,
|
||
|
int ddr_type)
|
||
|
{
|
||
|
return read_spd(dimm_config, upper_dimm, MODULE_TYPE) & 0x0f;
|
||
|
}
|
||
|
|
||
|
char *printable_rank_spec(char *buffer, int num_ranks, int dram_width,
|
||
|
int spd_package)
|
||
|
{
|
||
|
int die_count = ((spd_package >> 4) & 7) + 1;
|
||
|
|
||
|
if (spd_package & 0x80) { // non-monolithic
|
||
|
if ((spd_package & 3) == 2) { // 3DS
|
||
|
sprintf(buffer, "%dS%dRx%d", num_ranks, die_count,
|
||
|
dram_width);
|
||
|
} else { // MLS
|
||
|
char hchar = (die_count == 2) ? 'D' : 'Q';
|
||
|
|
||
|
sprintf(buffer, "%d%cRx%d", num_ranks, hchar,
|
||
|
dram_width);
|
||
|
}
|
||
|
} else {
|
||
|
sprintf(buffer, "%dRx%d", num_ranks, dram_width);
|
||
|
}
|
||
|
|
||
|
return buffer;
|
||
|
}
|
||
|
|
||
|
static void report_common_dimm(struct dimm_config *dimm_config, int upper_dimm,
|
||
|
int dimm, const char **dimm_types, int ddr_type,
|
||
|
char *volt_str, int if_num,
|
||
|
int num_ranks, int dram_width, int spd_package)
|
||
|
{
|
||
|
unsigned int spd_module_type;
|
||
|
char rank_spec[8];
|
||
|
int spd_ecc;
|
||
|
|
||
|
spd_module_type = get_dimm_module_type(dimm_config, upper_dimm,
|
||
|
ddr_type);
|
||
|
spd_ecc = get_dimm_ecc(dimm_config, upper_dimm, ddr_type);
|
||
|
|
||
|
printable_rank_spec(rank_spec, num_ranks, dram_width, spd_package);
|
||
|
printf("LMC%d.DIMM%d: DDR%d %s %s %s, %s\n",
|
||
|
if_num, dimm, ddr_type, dimm_types[spd_module_type],
|
||
|
rank_spec, spd_ecc ? "ECC" : "non-ECC", volt_str);
|
||
|
}
|
||
|
|
||
|
static void report_ddr3_dimm(struct dimm_config *dimm_config, int upper_dimm,
|
||
|
int dimm, int if_num)
|
||
|
{
|
||
|
int spd_voltage;
|
||
|
char *volt_str;
|
||
|
int spd_org = read_spd(dimm_config, upper_dimm,
|
||
|
DDR3_SPD_MODULE_ORGANIZATION);
|
||
|
int num_ranks = 1 + ((spd_org >> 3) & 0x7);
|
||
|
int dram_width = 4 << ((spd_org >> 0) & 0x7);
|
||
|
|
||
|
spd_voltage = read_spd(dimm_config, upper_dimm,
|
||
|
DDR3_SPD_NOMINAL_VOLTAGE);
|
||
|
if (spd_voltage == 0 || spd_voltage & 3)
|
||
|
volt_str = "1.5V";
|
||
|
if (spd_voltage & 2)
|
||
|
volt_str = "1.35V";
|
||
|
if (spd_voltage & 4)
|
||
|
volt_str = "1.2xV";
|
||
|
|
||
|
report_common_dimm(dimm_config, upper_dimm, dimm, ddr3_dimm_types,
|
||
|
DDR3_DRAM, volt_str, if_num,
|
||
|
num_ranks, dram_width, /*spd_package*/0);
|
||
|
}
|
||
|
|
||
|
static void report_ddr4_dimm(struct dimm_config *dimm_config, int upper_dimm,
|
||
|
int dimm, int if_num)
|
||
|
{
|
||
|
int spd_voltage;
|
||
|
char *volt_str;
|
||
|
int spd_package = 0xff & read_spd(dimm_config, upper_dimm,
|
||
|
DDR4_SPD_PACKAGE_TYPE);
|
||
|
int spd_org = 0xff & read_spd(dimm_config, upper_dimm,
|
||
|
DDR4_SPD_MODULE_ORGANIZATION);
|
||
|
int num_ranks = 1 + ((spd_org >> 3) & 0x7);
|
||
|
int dram_width = 4 << ((spd_org >> 0) & 0x7);
|
||
|
|
||
|
spd_voltage = read_spd(dimm_config, upper_dimm,
|
||
|
DDR4_SPD_MODULE_NOMINAL_VOLTAGE);
|
||
|
if (spd_voltage == 0x01 || spd_voltage & 0x02)
|
||
|
volt_str = "1.2V";
|
||
|
if (spd_voltage == 0x04 || spd_voltage & 0x08)
|
||
|
volt_str = "TBD1 V";
|
||
|
if (spd_voltage == 0x10 || spd_voltage & 0x20)
|
||
|
volt_str = "TBD2 V";
|
||
|
|
||
|
report_common_dimm(dimm_config, upper_dimm, dimm, ddr4_dimm_types,
|
||
|
DDR4_DRAM, volt_str, if_num,
|
||
|
num_ranks, dram_width, spd_package);
|
||
|
}
|
||
|
|
||
|
void report_dimm(struct dimm_config *dimm_config, int upper_dimm,
|
||
|
int dimm, int if_num)
|
||
|
{
|
||
|
int ddr_type;
|
||
|
|
||
|
/* ddr_type only indicates DDR4 or DDR3 */
|
||
|
ddr_type = get_ddr_type(dimm_config, upper_dimm);
|
||
|
|
||
|
if (ddr_type == DDR4_DRAM)
|
||
|
report_ddr4_dimm(dimm_config, 0, dimm, if_num);
|
||
|
else
|
||
|
report_ddr3_dimm(dimm_config, 0, dimm, if_num);
|
||
|
}
|