Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/zynq_z_turn_defconfig

63 lines
1.5 KiB
Text
Raw Normal View History

zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
arm: zynq: Fix SPL SD boot mode This patch is fixing two issues: 1. Insufficient stack size for fat fs buffers 2. Insufficient space in malloc area Tested on zc702 and zc706. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-01 12:50:33 +00:00
CONFIG_SPL_STACK_R_ADDR=0x200000
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_DEFAULT_DEVICE_TREE="zynq-zturn-myir"
CONFIG_DEBUG_UART=y
arm: zynq: Enable distro defaults setting BOOTCOMMAND is composed with distro_bootcmd but this variable is not present. Enabling distro defaults setting is fixing it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-09 18:31:16 +00:00
CONFIG_DISTRO_DEFAULTS=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
arm: zynq: Move bootcommand to defconfig It will cleanup generic config and enable option to change it for every board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-09 16:41:37 +00:00
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
arm: zynq: Fix SPL SD boot mode This patch is fixing two issues: 1. Insufficient stack size for fat fs buffers 2. Insufficient space in malloc area Tested on zc702 and zc706. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-01 12:50:33 +00:00
CONFIG_SPL_STACK_R=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="Zynq> "
Convert CONFIG_CMD_THOR_DOWNLOAD to Kconfig This converts the following to Kconfig: CONFIG_CMD_THOR_DOWNLOAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:57 +00:00
CONFIG_CMD_THOR_DOWNLOAD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_DFU=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
# CONFIG_CMD_FLASH is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_GPIO=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
arm: zynq: Enable FPGA/FPGA_XILINX via Kconfig Enabling fpga via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-03 14:53:56 +00:00
CONFIG_FPGA_XILINX=y
arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2018-02-16 12:32:51 +00:00
CONFIG_FPGA_ZYNQPL=y
arm: zynq: Enable DM_GPIO when needed There are two reasons for doing this change. There is still !DM driver for xilinx soft gpio IP and especially it is saving some space for memory constrained boards like cse (almost ~400B). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-09 14:27:31 +00:00
CONFIG_DM_GPIO=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig This patch moved ethernet PHY configs of Zynq boards to respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-24 05:21:30 +00:00
CONFIG_PHY_MARVELL=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_XILINX=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xe0001000
CONFIG_DEBUG_UART_CLOCK=50000000
arm: zynq: Move ZYNQ_SERIAL to Kconfig Move cadence/zynq serial driver via Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-06 08:16:05 +00:00
CONFIG_ZYNQ_SERIAL=y
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_ZYNQ_QSPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:58:08 +00:00
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
zynq: Add Z-Turn board The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-03 11:41:36 +00:00
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig This commit moves USB_FUNCTION_THOR config to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-29 18:30:18 +00:00
CONFIG_USB_FUNCTION_THOR=y
Reference in a new issue Copy permalink