mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
214 lines
5.9 KiB
C
214 lines
5.9 KiB
C
|
/*
|
||
|
* Memory setup for board based on EXYNOS4210
|
||
|
*
|
||
|
* Copyright (C) 2013 Samsung Electronics
|
||
|
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
#include <config.h>
|
||
|
#include <asm/arch/dmc.h>
|
||
|
#include "common_setup.h"
|
||
|
#include "exynos4_setup.h"
|
||
|
|
||
|
struct mem_timings mem = {
|
||
|
.direct_cmd_msr = {
|
||
|
DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
|
||
|
},
|
||
|
.timingref = TIMINGREF_VAL,
|
||
|
.timingrow = TIMINGROW_VAL,
|
||
|
.timingdata = TIMINGDATA_VAL,
|
||
|
.timingpower = TIMINGPOWER_VAL,
|
||
|
.zqcontrol = ZQ_CONTROL_VAL,
|
||
|
.control0 = CONTROL0_VAL,
|
||
|
.control1 = CONTROL1_VAL,
|
||
|
.control2 = CONTROL2_VAL,
|
||
|
.concontrol = CONCONTROL_VAL,
|
||
|
.prechconfig = PRECHCONFIG,
|
||
|
.memcontrol = MEMCONTROL_VAL,
|
||
|
.memconfig0 = MEMCONFIG0_VAL,
|
||
|
.memconfig1 = MEMCONFIG1_VAL,
|
||
|
.dll_resync = FORCE_DLL_RESYNC,
|
||
|
.dll_on = DLL_CONTROL_ON,
|
||
|
};
|
||
|
static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
|
||
|
{
|
||
|
if (ctrl_no) {
|
||
|
writel((mem.control1 | (1 << mem.dll_resync)),
|
||
|
&dmc->phycontrol1);
|
||
|
writel((mem.control1 | (0 << mem.dll_resync)),
|
||
|
&dmc->phycontrol1);
|
||
|
} else {
|
||
|
writel((mem.control0 | (0 << mem.dll_on)),
|
||
|
&dmc->phycontrol0);
|
||
|
writel((mem.control0 | (1 << mem.dll_on)),
|
||
|
&dmc->phycontrol0);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
|
||
|
{
|
||
|
int i;
|
||
|
unsigned long mask = 0;
|
||
|
|
||
|
if (chip)
|
||
|
mask = DIRECT_CMD_CHIP1_SHIFT;
|
||
|
|
||
|
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
|
||
|
writel(mem.direct_cmd_msr[i] | mask,
|
||
|
&dmc->directcmd);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void dmc_init(struct exynos4_dmc *dmc)
|
||
|
{
|
||
|
/*
|
||
|
* DLL Parameter Setting:
|
||
|
* Termination: Enable R/W
|
||
|
* Phase Delay for DQS Cleaning: 180' Shift
|
||
|
*/
|
||
|
writel(mem.control1, &dmc->phycontrol1);
|
||
|
|
||
|
/*
|
||
|
* ZQ Calibration
|
||
|
* Termination: Disable
|
||
|
* Auto Calibration Start: Enable
|
||
|
*/
|
||
|
writel(mem.zqcontrol, &dmc->phyzqcontrol);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
/*
|
||
|
* Update DLL Information:
|
||
|
* Force DLL Resyncronization
|
||
|
*/
|
||
|
phy_control_reset(1, dmc);
|
||
|
phy_control_reset(0, dmc);
|
||
|
|
||
|
/* Set DLL Parameters */
|
||
|
writel(mem.control1, &dmc->phycontrol1);
|
||
|
|
||
|
/* DLL Start */
|
||
|
writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
|
||
|
|
||
|
writel(mem.control2, &dmc->phycontrol2);
|
||
|
|
||
|
/* Set Clock Ratio of Bus clock to Memory Clock */
|
||
|
writel(mem.concontrol, &dmc->concontrol);
|
||
|
|
||
|
/*
|
||
|
* Memor Burst length: 8
|
||
|
* Number of chips: 2
|
||
|
* Memory Bus width: 32 bit
|
||
|
* Memory Type: DDR3
|
||
|
* Additional Latancy for PLL: 1 Cycle
|
||
|
*/
|
||
|
writel(mem.memcontrol, &dmc->memcontrol);
|
||
|
|
||
|
writel(mem.memconfig0, &dmc->memconfig0);
|
||
|
writel(mem.memconfig1, &dmc->memconfig1);
|
||
|
|
||
|
/* Config Precharge Policy */
|
||
|
writel(mem.prechconfig, &dmc->prechconfig);
|
||
|
/*
|
||
|
* TimingAref, TimingRow, TimingData, TimingPower Setting:
|
||
|
* Values as per Memory AC Parameters
|
||
|
*/
|
||
|
writel(mem.timingref, &dmc->timingref);
|
||
|
writel(mem.timingrow, &dmc->timingrow);
|
||
|
writel(mem.timingdata, &dmc->timingdata);
|
||
|
writel(mem.timingpower, &dmc->timingpower);
|
||
|
|
||
|
/* Chip0: NOP Command: Assert and Hold CKE to high level */
|
||
|
writel(DIRECT_CMD_NOP, &dmc->directcmd);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
||
|
dmc_config_mrs(dmc, 0);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
/* Chip0: ZQINIT */
|
||
|
writel(DIRECT_CMD_ZQ, &dmc->directcmd);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
||
|
dmc_config_mrs(dmc, 1);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
/* Chip1: ZQINIT */
|
||
|
writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
phy_control_reset(1, dmc);
|
||
|
sdelay(0x100000);
|
||
|
|
||
|
/* turn on DREX0, DREX1 */
|
||
|
writel((mem.concontrol | AREF_EN), &dmc->concontrol);
|
||
|
}
|
||
|
|
||
|
void mem_ctrl_init(int reset)
|
||
|
{
|
||
|
struct exynos4_dmc *dmc;
|
||
|
|
||
|
/*
|
||
|
* Async bridge configuration at CPU_core:
|
||
|
* 1: half_sync
|
||
|
* 0: full_sync
|
||
|
*/
|
||
|
writel(1, ASYNC_CONFIG);
|
||
|
#ifdef CONFIG_ORIGEN
|
||
|
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
|
||
|
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
|
||
|
APB_SFR_INTERLEAVE_CONF_OFFSET);
|
||
|
/* Update MIU Configuration */
|
||
|
writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
|
||
|
APB_SFR_ARBRITATION_CONF_OFFSET);
|
||
|
#else
|
||
|
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
|
||
|
APB_SFR_INTERLEAVE_CONF_OFFSET);
|
||
|
writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
|
||
|
writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
|
||
|
writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
|
||
|
#ifdef CONFIG_MIU_LINEAR
|
||
|
writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
|
||
|
writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
|
||
|
writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
|
||
|
writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
|
||
|
writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
|
||
|
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
|
||
|
#endif
|
||
|
#endif
|
||
|
/* DREX0 */
|
||
|
dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
|
||
|
dmc_init(dmc);
|
||
|
dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
|
||
|
+ DMC_OFFSET);
|
||
|
dmc_init(dmc);
|
||
|
}
|