u-boot/arch/arm/mach-uniphier/micro-support-card.c

288 lines
5.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012-2015 Panasonic Corporation
* Copyright (C) 2015-2020 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <common.h>
#include <dm/of.h>
#include <fdt_support.h>
#include <linux/ctype.h>
#include <linux/io.h>
#include "micro-support-card.h"
#define SMC911X_OFFSET 0x00000
#define LED_OFFSET 0x90000
#define NS16550A_OFFSET 0xb0000
#define MICRO_SUPPORT_CARD_RESET 0xd0034
#define MICRO_SUPPORT_CARD_REVISION 0xd00e0
static bool support_card_found;
static void __iomem *support_card_base;
static void support_card_detect(void)
{
DECLARE_GLOBAL_DATA_PTR;
const void *fdt = gd->fdt_blob;
int offset;
u64 addr, addr2;
offset = fdt_node_offset_by_compatible(fdt, 0, "smsc,lan9118");
if (offset < 0)
return;
addr = fdt_get_base_address(fdt, offset);
if (addr == OF_BAD_ADDR)
return;
addr -= SMC911X_OFFSET;
offset = fdt_node_offset_by_compatible(fdt, 0, "ns16550a");
if (offset < 0)
return;
addr2 = fdt_get_base_address(fdt, offset);
if (addr2 == OF_BAD_ADDR)
return;
addr2 -= NS16550A_OFFSET;
/* sanity check */
if (addr != addr2)
return;
support_card_base = ioremap(addr, 0x100000);
support_card_found = true;
}
/*
* 0: reset deassert, 1: reset
*
* bit[0]: LAN, I2C, LED
* bit[1]: UART
*/
static void support_card_reset_deassert(void)
{
writel(0x00010000, support_card_base + MICRO_SUPPORT_CARD_RESET);
}
static void support_card_reset(void)
{
writel(0x00020003, support_card_base + MICRO_SUPPORT_CARD_RESET);
}
static int support_card_show_revision(void)
{
u32 revision;
revision = readl(support_card_base + MICRO_SUPPORT_CARD_REVISION);
revision &= 0xff;
/* revision 3.6.x card changed the revision format */
printf("SC: Micro Support Card (CPLD version %s%d.%d)\n",
revision >> 4 == 6 ? "3." : "",
revision >> 4, revision & 0xf);
return 0;
}
void support_card_init(void)
{
support_card_detect();
if (!support_card_found)
return;
support_card_reset();
/*
* After power on, we need to keep the LAN controller in reset state
* for a while. (200 usec)
*/
udelay(200);
support_card_reset_deassert();
support_card_show_revision();
}
#if defined(CONFIG_SMC911X)
#include <netdev.h>
int board_eth_init(bd_t *bis)
{
if (!support_card_found)
return 0;
return smc911x_initialize(0, (unsigned long)support_card_base + SMC911X_OFFSET);
}
#endif
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
#if defined(CONFIG_MTD_NOR_FLASH)
#include <mtd/cfi_flash.h>
struct memory_bank {
phys_addr_t base;
unsigned long size;
};
static int mem_is_flash(const struct memory_bank *mem)
{
const int loop = 128;
u32 *scratch_addr;
u32 saved_value;
int ret = 1;
int i;
/* just in case, use the tail of the memory bank */
scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
sizeof(u32) * loop, MAP_NOCACHE);
for (i = 0; i < loop; i++, scratch_addr++) {
saved_value = readl(scratch_addr);
writel(~saved_value, scratch_addr);
if (readl(scratch_addr) != saved_value) {
/* We assume no memory or SRAM here. */
writel(saved_value, scratch_addr);
ret = 0;
break;
}
}
unmap_physmem(scratch_addr, MAP_NOCACHE);
return ret;
}
/* {address, size} */
static const struct memory_bank memory_banks[] = {
{0x42000000, 0x01f00000},
};
static const struct memory_bank
*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
phys_addr_t cfi_flash_bank_addr(int i)
{
return flash_banks_list[i]->base;
}
unsigned long cfi_flash_bank_size(int i)
{
return flash_banks_list[i]->size;
}
static void detect_num_flash_banks(void)
{
const struct memory_bank *memory_bank, *end;
cfi_flash_num_flash_banks = 0;
memory_bank = memory_banks;
end = memory_bank + ARRAY_SIZE(memory_banks);
for (; memory_bank < end; memory_bank++) {
if (cfi_flash_num_flash_banks >=
CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
break;
if (mem_is_flash(memory_bank)) {
flash_banks_list[cfi_flash_num_flash_banks] =
memory_bank;
debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
(unsigned long)memory_bank->base,
(unsigned long)memory_bank->size);
cfi_flash_num_flash_banks++;
}
}
debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
}
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
#else /* CONFIG_MTD_NOR_FLASH */
static void detect_num_flash_banks(void)
{
};
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
#endif /* CONFIG_MTD_NOR_FLASH */
void support_card_late_init(void)
{
if (!support_card_found)
return;
detect_num_flash_banks();
}
static const u8 ledval_num[] = {
0x7e, /* 0 */
0x0c, /* 1 */
0xb6, /* 2 */
0x9e, /* 3 */
0xcc, /* 4 */
0xda, /* 5 */
0xfa, /* 6 */
0x4e, /* 7 */
0xfe, /* 8 */
0xde, /* 9 */
};
static const u8 ledval_alpha[] = {
0xee, /* A */
0xf8, /* B */
0x72, /* C */
0xbc, /* D */
0xf2, /* E */
0xe2, /* F */
0x7a, /* G */
0xe8, /* H */
0x08, /* I */
0x3c, /* J */
0xea, /* K */
0x70, /* L */
0x6e, /* M */
0xa8, /* N */
0xb8, /* O */
0xe6, /* P */
0xce, /* Q */
0xa0, /* R */
0xc8, /* S */
0x8c, /* T */
0x7c, /* U */
0x54, /* V */
0xfc, /* W */
0xec, /* X */
0xdc, /* Y */
0xa4, /* Z */
};
static u8 char2ledval(char c)
{
if (isdigit(c))
return ledval_num[c - '0'];
else if (isalpha(c))
return ledval_alpha[toupper(c) - 'A'];
return 0;
}
void led_puts(const char *s)
{
int i;
u32 val = 0;
if (!support_card_found)
return;
if (!s)
return;
for (i = 0; i < 4; i++) {
val <<= 8;
val |= char2ledval(*s);
if (*s != '\0')
s++;
}
writel(~val, support_card_base + LED_OFFSET);
}