2014-05-05 10:52:26 +00:00
|
|
|
/*
|
|
|
|
* (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
|
|
|
|
*
|
|
|
|
* (C) Copyright 2007-2011
|
|
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
|
|
* Tom Cubie <tangliang@allwinnertech.com>
|
|
|
|
*
|
|
|
|
* Configuration settings for the Allwinner sunxi series of boards.
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _SUNXI_COMMON_CONFIG_H
|
|
|
|
#define _SUNXI_COMMON_CONFIG_H
|
|
|
|
|
2015-09-13 15:29:33 +00:00
|
|
|
#include <asm/arch/cpu.h>
|
2015-05-19 20:12:31 +00:00
|
|
|
#include <linux/stringify.h>
|
|
|
|
|
2015-02-21 05:34:09 +00:00
|
|
|
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
|
|
|
|
/*
|
|
|
|
* The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
|
|
|
|
* expense of restricting some features, so the regular machine id values can
|
|
|
|
* be used.
|
|
|
|
*/
|
|
|
|
# define CONFIG_MACH_TYPE_COMPAT_REV 0
|
|
|
|
#else
|
|
|
|
/*
|
|
|
|
* A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
|
|
|
|
* Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
|
|
|
|
* beyond the machine id check.
|
|
|
|
*/
|
|
|
|
# define CONFIG_MACH_TYPE_COMPAT_REV 1
|
|
|
|
#endif
|
|
|
|
|
2014-05-05 10:52:26 +00:00
|
|
|
/* Serial & console */
|
|
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
|
|
/* ns16550 reg in the low bits of cpu reg */
|
|
|
|
#define CONFIG_SYS_NS16550_CLK 24000000
|
2015-11-19 13:48:13 +00:00
|
|
|
#ifndef CONFIG_DM_SERIAL
|
2014-10-31 02:25:50 +00:00
|
|
|
# define CONFIG_SYS_NS16550_REG_SIZE -4
|
|
|
|
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
|
|
|
|
# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
|
|
|
|
# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
|
|
|
|
# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
|
|
|
|
# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
|
|
|
|
#endif
|
2014-05-05 10:52:26 +00:00
|
|
|
|
2015-05-16 17:52:11 +00:00
|
|
|
/* CPU */
|
2017-02-16 01:20:19 +00:00
|
|
|
#define COUNTER_FREQUENCY 24000000
|
2015-05-16 17:52:11 +00:00
|
|
|
|
2015-05-19 20:12:31 +00:00
|
|
|
/*
|
|
|
|
* The DRAM Base differs between some models. We cannot use macros for the
|
|
|
|
* CONFIG_FOO defines which contain the DRAM base address since they end
|
|
|
|
* up unexpanded in include/autoconf.mk .
|
|
|
|
*
|
|
|
|
* So we have to have this #ifdef #else #endif block for these.
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_MACH_SUN9I
|
|
|
|
#define SDRAM_OFFSET(x) 0x2##x
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x2a000000
|
2015-09-13 11:02:48 +00:00
|
|
|
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
|
|
|
|
* since it needs to fit in with the other values. By also #defining it
|
|
|
|
* we get warnings if the Kconfig value mismatches. */
|
|
|
|
#define CONFIG_SPL_STACK_R_ADDR 0x2fe00000
|
2015-05-19 20:12:31 +00:00
|
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
|
|
|
|
#else
|
|
|
|
#define SDRAM_OFFSET(x) 0x4##x
|
2014-05-05 10:52:26 +00:00
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
2015-05-19 20:12:31 +00:00
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x4a000000
|
2015-09-13 11:02:48 +00:00
|
|
|
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
|
|
|
|
* since it needs to fit in with the other values. By also #defining it
|
|
|
|
* we get warnings if the Kconfig value mismatches. */
|
|
|
|
#define CONFIG_SPL_STACK_R_ADDR 0x4fe00000
|
2015-05-19 20:12:31 +00:00
|
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
|
|
|
|
|
2017-02-16 01:20:23 +00:00
|
|
|
#ifdef CONFIG_SUNXI_HIGH_SRAM
|
2015-05-20 13:27:16 +00:00
|
|
|
/*
|
|
|
|
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
|
|
|
|
* slightly bigger. Note that it is possible to map the first 32 KiB of the
|
|
|
|
* A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
|
|
|
|
* undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
|
|
|
|
* the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x10000
|
2016-09-05 00:32:38 +00:00
|
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */
|
2015-05-20 13:27:16 +00:00
|
|
|
#else
|
2014-05-05 10:52:26 +00:00
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
|
|
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
|
2015-05-20 13:27:16 +00:00
|
|
|
#endif
|
2014-05-05 10:52:26 +00:00
|
|
|
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE
|
|
|
|
#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
|
|
|
|
|
2014-07-18 19:38:41 +00:00
|
|
|
#ifdef CONFIG_AHCI
|
|
|
|
#define CONFIG_LIBATA
|
|
|
|
#define CONFIG_SCSI_AHCI
|
|
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
|
|
#define CONFIG_SUNXI_AHCI
|
2015-06-10 08:51:40 +00:00
|
|
|
#define CONFIG_SYS_64BIT_LBA
|
2014-07-18 19:38:41 +00:00
|
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
2016-05-01 17:36:02 +00:00
|
|
|
#define CONFIG_SCSI
|
2014-07-18 19:38:41 +00:00
|
|
|
#endif
|
|
|
|
|
2014-05-05 10:52:26 +00:00
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
#define CONFIG_INITRD_TAG
|
2015-03-28 17:35:36 +00:00
|
|
|
#define CONFIG_SERIAL_TAG
|
2014-05-05 10:52:26 +00:00
|
|
|
|
2015-08-16 12:48:22 +00:00
|
|
|
#ifdef CONFIG_NAND_SUNXI
|
2016-06-15 19:09:27 +00:00
|
|
|
#define CONFIG_SYS_NAND_MAX_ECCPOS 1664
|
2016-06-15 19:09:23 +00:00
|
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 8
|
2017-02-27 17:22:10 +00:00
|
|
|
|
|
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
#define CONFIG_MTD_PARTITIONS
|
2015-07-23 12:33:03 +00:00
|
|
|
#endif
|
|
|
|
|
2016-06-07 11:28:34 +00:00
|
|
|
#ifdef CONFIG_SPL_SPI_SUNXI
|
|
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
|
|
|
|
#endif
|
|
|
|
|
2014-05-05 13:42:31 +00:00
|
|
|
/* mmc config */
|
2015-10-15 20:04:07 +00:00
|
|
|
#ifdef CONFIG_MMC
|
2014-05-05 13:42:31 +00:00
|
|
|
#define CONFIG_MMC_SUNXI_SLOT 0
|
2017-02-27 17:22:03 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
2014-05-05 13:42:31 +00:00
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
|
2016-11-05 19:51:11 +00:00
|
|
|
#define CONFIG_SYS_MMC_MAX_DEVICE 4
|
2017-03-20 14:57:22 +00:00
|
|
|
#elif defined(CONFIG_ENV_IS_NOWHERE)
|
|
|
|
#define CONFIG_ENV_SIZE (128 << 10)
|
2014-10-22 08:47:42 +00:00
|
|
|
#endif
|
2014-05-05 13:42:31 +00:00
|
|
|
|
2015-09-13 15:16:54 +00:00
|
|
|
/* 64MB of malloc() pool */
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20))
|
2014-05-05 10:52:26 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
*/
|
2014-10-07 13:20:30 +00:00
|
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
|
|
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
|
2014-05-05 10:52:26 +00:00
|
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
|
|
|
|
|
|
/* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
|
|
|
|
/* standalone support */
|
2015-05-19 20:12:31 +00:00
|
|
|
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
|
2014-05-05 10:52:26 +00:00
|
|
|
|
|
|
|
/* FLASH and environment organization */
|
|
|
|
|
2015-07-27 14:21:26 +00:00
|
|
|
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
|
2014-05-05 10:52:26 +00:00
|
|
|
|
|
|
|
#define CONFIG_FAT_WRITE /* enable write access */
|
|
|
|
|
|
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
|
|
|
2017-01-02 11:48:45 +00:00
|
|
|
#ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */
|
2015-02-07 17:47:30 +00:00
|
|
|
#define CONFIG_SPL_BOARD_LOAD_IMAGE
|
2017-01-02 11:48:45 +00:00
|
|
|
#endif
|
2015-02-07 17:47:30 +00:00
|
|
|
|
2017-02-16 01:20:23 +00:00
|
|
|
#ifdef CONFIG_SUNXI_HIGH_SRAM
|
sunxi: Increase SPL header size to 64 bytes to avoid code corruption
The current SPL header, created by the 'mksunxiboot' tool, has size
32 bytes. But the code in the boot ROM stores the information about
the boot media at the offset 0x28 before passing control to the SPL.
For example, when booting from the SD card, the magic number written
by the boot ROM is 0. And when booting from the SPI flash, the magic
number is 3. NAND and eMMC probably have their own special magic
numbers too.
Currently the corrupted byte is a part of one of the instructions in
the reset vectors table:
b reset
ldr pc, _undefined_instruction
ldr pc, _software_interrupt <- Corruption happens here
ldr pc, _prefetch_abort
ldr pc, _data_abort
ldr pc, _not_used
ldr pc, _irq
ldr pc, _fiq
In practice this does not cause any visible problems, but it's still
better to fix it. As a bonus, the reported boot media type can be
later used in the 'spl_boot_device' function, but this is out of
the scope of this patch.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-14 01:13:26 +00:00
|
|
|
#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */
|
2017-02-16 01:20:23 +00:00
|
|
|
#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB */
|
|
|
|
#define LOW_LEVEL_SRAM_STACK 0x00018000
|
2016-03-29 15:29:10 +00:00
|
|
|
#else
|
sunxi: Increase SPL header size to 64 bytes to avoid code corruption
The current SPL header, created by the 'mksunxiboot' tool, has size
32 bytes. But the code in the boot ROM stores the information about
the boot media at the offset 0x28 before passing control to the SPL.
For example, when booting from the SD card, the magic number written
by the boot ROM is 0. And when booting from the SPI flash, the magic
number is 3. NAND and eMMC probably have their own special magic
numbers too.
Currently the corrupted byte is a part of one of the instructions in
the reset vectors table:
b reset
ldr pc, _undefined_instruction
ldr pc, _software_interrupt <- Corruption happens here
ldr pc, _prefetch_abort
ldr pc, _data_abort
ldr pc, _not_used
ldr pc, _irq
ldr pc, _fiq
In practice this does not cause any visible problems, but it's still
better to fix it. As a bonus, the reported boot media type can be
later used in the 'spl_boot_device' function, but this is out of
the scope of this patch.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-14 01:13:26 +00:00
|
|
|
#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */
|
|
|
|
#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */
|
2017-02-16 01:20:23 +00:00
|
|
|
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
|
2016-03-29 15:29:10 +00:00
|
|
|
#endif
|
2014-05-05 10:52:30 +00:00
|
|
|
|
2017-02-16 01:20:23 +00:00
|
|
|
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
|
|
|
|
|
2016-03-29 15:29:10 +00:00
|
|
|
#ifndef CONFIG_ARM64
|
2014-05-05 10:52:30 +00:00
|
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
|
2016-03-29 15:29:10 +00:00
|
|
|
#endif
|
2014-05-05 10:52:30 +00:00
|
|
|
|
|
|
|
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
|
|
|
|
|
2014-05-05 10:52:26 +00:00
|
|
|
|
2014-06-13 20:55:49 +00:00
|
|
|
/* I2C */
|
2016-02-23 17:47:19 +00:00
|
|
|
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
|
|
|
|
defined CONFIG_SY8106A_POWER
|
2015-01-23 14:28:22 +00:00
|
|
|
#endif
|
|
|
|
|
2015-04-10 21:09:52 +00:00
|
|
|
#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
|
|
|
|
defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
|
2016-01-14 13:06:26 +00:00
|
|
|
defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
|
2015-04-23 15:47:22 +00:00
|
|
|
#define CONFIG_SYS_I2C
|
2014-06-13 20:55:49 +00:00
|
|
|
#define CONFIG_SYS_I2C_MVTWSI
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 400000
|
|
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7f
|
2015-04-23 15:47:22 +00:00
|
|
|
#endif
|
2015-02-16 16:23:25 +00:00
|
|
|
|
|
|
|
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
|
|
|
|
#define CONFIG_SYS_I2C_SOFT
|
|
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
|
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
|
|
|
|
/* We use pin names in Kconfig and sunxi_name_to_gpio() */
|
|
|
|
#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
|
|
|
|
#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
extern int soft_i2c_gpio_sda;
|
|
|
|
extern int soft_i2c_gpio_scl;
|
|
|
|
#endif
|
2015-03-07 11:00:02 +00:00
|
|
|
#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */
|
|
|
|
#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */
|
|
|
|
#else
|
|
|
|
#define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */
|
|
|
|
#define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */
|
2015-02-16 16:23:25 +00:00
|
|
|
#endif
|
|
|
|
|
2014-06-13 20:55:50 +00:00
|
|
|
/* PMU */
|
2015-11-28 17:07:22 +00:00
|
|
|
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
|
2016-02-23 17:47:19 +00:00
|
|
|
defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
|
|
|
|
defined CONFIG_SY8106A_POWER
|
2014-06-13 20:55:50 +00:00
|
|
|
#endif
|
|
|
|
|
2014-06-09 09:36:58 +00:00
|
|
|
#ifndef CONFIG_CONS_INDEX
|
2014-05-05 10:52:26 +00:00
|
|
|
#define CONFIG_CONS_INDEX 1 /* UART0 */
|
2014-06-09 09:36:58 +00:00
|
|
|
#endif
|
2014-05-05 10:52:26 +00:00
|
|
|
|
2015-08-01 12:44:29 +00:00
|
|
|
#ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
|
2015-02-20 15:55:12 +00:00
|
|
|
#if CONFIG_CONS_INDEX == 1
|
|
|
|
#ifdef CONFIG_MACH_SUN9I
|
|
|
|
#define OF_STDOUT_PATH "/soc/serial@07000000:115200"
|
|
|
|
#else
|
|
|
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200"
|
|
|
|
#endif
|
|
|
|
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
|
|
|
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
|
2015-05-06 00:02:00 +00:00
|
|
|
#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
|
|
|
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
|
2015-02-20 15:55:12 +00:00
|
|
|
#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
|
|
|
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200"
|
|
|
|
#else
|
|
|
|
#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
|
|
|
|
#endif
|
2015-08-01 12:44:29 +00:00
|
|
|
#endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
|
2015-02-20 15:55:12 +00:00
|
|
|
|
2014-06-05 18:00:15 +00:00
|
|
|
/* GPIO */
|
|
|
|
#define CONFIG_SUNXI_GPIO
|
|
|
|
|
2014-08-13 05:55:06 +00:00
|
|
|
#ifdef CONFIG_VIDEO
|
|
|
|
/*
|
2015-02-02 16:13:29 +00:00
|
|
|
* The amount of RAM to keep free at the top of RAM when relocating u-boot,
|
|
|
|
* to use as framebuffer. This must be a multiple of 4096.
|
2014-08-13 05:55:06 +00:00
|
|
|
*/
|
2015-09-13 15:16:54 +00:00
|
|
|
#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
|
2014-08-13 05:55:06 +00:00
|
|
|
|
2014-08-13 05:55:07 +00:00
|
|
|
/* Do we want to initialize a simple FB? */
|
|
|
|
#define CONFIG_VIDEO_DT_SIMPLEFB
|
|
|
|
|
2014-08-13 05:55:06 +00:00
|
|
|
#define CONFIG_VIDEO_SUNXI
|
|
|
|
|
|
|
|
#define CONFIG_VIDEO_LOGO
|
2014-12-19 12:46:33 +00:00
|
|
|
#define CONFIG_VIDEO_STD_TIMINGS
|
2014-12-19 15:05:12 +00:00
|
|
|
#define CONFIG_I2C_EDID
|
2015-08-04 22:06:47 +00:00
|
|
|
#define VIDEO_LINE_LEN (pGD->plnSizeX)
|
2014-08-13 05:55:06 +00:00
|
|
|
|
|
|
|
/* allow both serial and cfb console. */
|
|
|
|
/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
|
|
|
|
|
|
|
|
#endif /* CONFIG_VIDEO */
|
|
|
|
|
2014-06-09 09:37:00 +00:00
|
|
|
/* Ethernet support */
|
|
|
|
#ifdef CONFIG_SUNXI_EMAC
|
2015-04-16 19:47:06 +00:00
|
|
|
#define CONFIG_PHY_ADDR 1
|
2014-06-09 09:37:00 +00:00
|
|
|
#define CONFIG_MII /* MII PHY management */
|
2015-04-16 19:47:06 +00:00
|
|
|
#define CONFIG_PHYLIB
|
2014-06-09 09:37:00 +00:00
|
|
|
#endif
|
|
|
|
|
2014-05-05 10:52:28 +00:00
|
|
|
#ifdef CONFIG_SUNXI_GMAC
|
|
|
|
#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
|
|
|
|
#define CONFIG_PHY_ADDR 1
|
|
|
|
#define CONFIG_MII /* MII PHY management */
|
2016-03-16 12:46:22 +00:00
|
|
|
#define CONFIG_PHY_REALTEK
|
2014-05-05 10:52:28 +00:00
|
|
|
#endif
|
|
|
|
|
2015-08-04 15:04:09 +00:00
|
|
|
#ifdef CONFIG_USB_EHCI_HCD
|
2015-05-10 12:10:27 +00:00
|
|
|
#define CONFIG_USB_OHCI_NEW
|
|
|
|
#define CONFIG_USB_OHCI_SUNXI
|
|
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
2014-07-24 20:54:22 +00:00
|
|
|
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
|
2015-01-11 16:17:00 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_USB_MUSB_SUNXI
|
2015-08-04 15:04:06 +00:00
|
|
|
#define CONFIG_USB_MUSB_PIO_ONLY
|
2015-01-11 16:17:00 +00:00
|
|
|
#endif
|
|
|
|
|
2015-08-04 15:04:11 +00:00
|
|
|
#ifdef CONFIG_USB_MUSB_GADGET
|
2016-04-13 11:20:26 +00:00
|
|
|
#define CONFIG_USB_FUNCTION_FASTBOOT
|
|
|
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
2015-08-04 15:04:11 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_USB_FUNCTION_FASTBOOT
|
|
|
|
#define CONFIG_CMD_FASTBOOT
|
|
|
|
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
|
|
|
#define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
|
2015-10-15 12:34:20 +00:00
|
|
|
#define CONFIG_ANDROID_BOOT_IMAGE
|
2015-08-04 15:04:11 +00:00
|
|
|
|
|
|
|
#define CONFIG_FASTBOOT_FLASH
|
2015-10-15 20:04:07 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_MMC
|
2015-08-04 15:04:11 +00:00
|
|
|
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
|
|
|
|
#endif
|
2015-10-15 20:04:07 +00:00
|
|
|
#endif
|
2015-08-04 15:04:11 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
|
|
|
|
#endif
|
|
|
|
|
2014-09-18 19:03:34 +00:00
|
|
|
#ifdef CONFIG_USB_KEYBOARD
|
|
|
|
#define CONFIG_PREBOOT
|
2015-05-13 12:42:18 +00:00
|
|
|
#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
|
2014-09-18 19:03:34 +00:00
|
|
|
#endif
|
|
|
|
|
2014-06-14 06:59:09 +00:00
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
|
2014-05-05 10:52:26 +00:00
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
|
|
#include <config_distro_defaults.h>
|
2014-07-31 21:04:45 +00:00
|
|
|
|
2016-05-04 21:15:32 +00:00
|
|
|
#ifdef CONFIG_ARM64
|
|
|
|
/*
|
|
|
|
* Boards seem to come with at least 512MB of DRAM.
|
|
|
|
* The kernel should go at 512K, which is the default text offset (that will
|
|
|
|
* be adjusted at runtime if needed).
|
|
|
|
* There is no compression for arm64 kernels (yet), so leave some space
|
|
|
|
* for really big kernels, say 256MB for now.
|
|
|
|
* Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
|
|
|
|
* Align the initrd to a 2MB page.
|
|
|
|
*/
|
|
|
|
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000))
|
|
|
|
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))
|
|
|
|
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))
|
|
|
|
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
|
|
|
|
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
|
|
|
|
|
|
|
|
#else
|
2014-12-24 15:08:30 +00:00
|
|
|
/*
|
2015-09-13 15:16:54 +00:00
|
|
|
* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
|
2014-12-24 15:08:30 +00:00
|
|
|
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
|
|
|
|
* 1M script, 1M pxe and the ramdisk at the end.
|
|
|
|
*/
|
2015-10-25 04:44:46 +00:00
|
|
|
|
|
|
|
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
|
|
|
|
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
|
|
|
|
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
|
|
|
|
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
|
|
|
|
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
|
2016-05-04 21:15:32 +00:00
|
|
|
#endif
|
2015-10-25 04:44:46 +00:00
|
|
|
|
2014-08-01 07:37:58 +00:00
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
2015-09-13 15:16:54 +00:00
|
|
|
"bootm_size=0xa000000\0" \
|
2015-10-25 04:44:46 +00:00
|
|
|
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
|
|
|
|
"fdt_addr_r=" FDT_ADDR_R "\0" \
|
|
|
|
"scriptaddr=" SCRIPT_ADDR_R "\0" \
|
|
|
|
"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
|
|
|
|
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
|
|
|
|
|
|
|
|
#define DFU_ALT_INFO_RAM \
|
|
|
|
"dfu_alt_info_ram=" \
|
|
|
|
"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
|
|
|
|
"fdt ram " FDT_ADDR_R " 0x100000;" \
|
|
|
|
"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
|
2014-08-01 07:37:58 +00:00
|
|
|
|
2014-10-07 07:11:49 +00:00
|
|
|
#ifdef CONFIG_MMC
|
|
|
|
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
|
2015-12-16 19:59:40 +00:00
|
|
|
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
|
|
|
|
#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
|
|
|
|
#else
|
|
|
|
#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
|
|
|
|
#endif
|
2014-10-07 07:11:49 +00:00
|
|
|
#else
|
|
|
|
#define BOOT_TARGET_DEVICES_MMC(func)
|
2015-12-16 19:59:40 +00:00
|
|
|
#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
|
2014-10-07 07:11:49 +00:00
|
|
|
#endif
|
|
|
|
|
2014-07-31 21:04:45 +00:00
|
|
|
#ifdef CONFIG_AHCI
|
|
|
|
#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
|
|
|
|
#else
|
|
|
|
#define BOOT_TARGET_DEVICES_SCSI(func)
|
|
|
|
#endif
|
|
|
|
|
2015-08-04 15:04:09 +00:00
|
|
|
#ifdef CONFIG_USB_STORAGE
|
2014-10-03 12:16:22 +00:00
|
|
|
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
|
|
|
|
#else
|
|
|
|
#define BOOT_TARGET_DEVICES_USB(func)
|
|
|
|
#endif
|
|
|
|
|
2015-09-17 16:52:53 +00:00
|
|
|
/* FEL boot support, auto-execute boot.scr if a script address was provided */
|
|
|
|
#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
|
|
|
|
"bootcmd_fel=" \
|
|
|
|
"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
|
|
|
|
"echo '(FEL boot)'; " \
|
|
|
|
"source ${fel_scriptaddr}; " \
|
|
|
|
"fi\0"
|
|
|
|
#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
|
|
|
|
"fel "
|
|
|
|
|
2014-07-31 21:04:45 +00:00
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
2015-09-17 16:52:53 +00:00
|
|
|
func(FEL, fel, na) \
|
2014-10-07 07:11:49 +00:00
|
|
|
BOOT_TARGET_DEVICES_MMC(func) \
|
2015-12-16 19:59:40 +00:00
|
|
|
BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
|
2014-07-31 21:04:45 +00:00
|
|
|
BOOT_TARGET_DEVICES_SCSI(func) \
|
2014-10-03 12:16:22 +00:00
|
|
|
BOOT_TARGET_DEVICES_USB(func) \
|
2014-07-31 21:04:45 +00:00
|
|
|
func(PXE, pxe, na) \
|
|
|
|
func(DHCP, dhcp, na)
|
|
|
|
|
2015-10-09 16:11:15 +00:00
|
|
|
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
|
|
|
|
#define BOOTCMD_SUNXI_COMPAT \
|
|
|
|
"bootcmd_sunxi_compat=" \
|
|
|
|
"setenv root /dev/mmcblk0p3 rootwait; " \
|
|
|
|
"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
|
|
|
|
"echo Loaded environment from uEnv.txt; " \
|
|
|
|
"env import -t 0x44000000 ${filesize}; " \
|
|
|
|
"fi; " \
|
|
|
|
"setenv bootargs console=${console} root=${root} ${extraargs}; " \
|
|
|
|
"ext2load mmc 0 0x43000000 script.bin && " \
|
|
|
|
"ext2load mmc 0 0x48000000 uImage && " \
|
|
|
|
"bootm 0x48000000\0"
|
|
|
|
#else
|
|
|
|
#define BOOTCMD_SUNXI_COMPAT
|
|
|
|
#endif
|
|
|
|
|
2014-07-31 21:04:45 +00:00
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
|
2014-09-18 19:03:34 +00:00
|
|
|
#ifdef CONFIG_USB_KEYBOARD
|
|
|
|
#define CONSOLE_STDIN_SETTINGS \
|
|
|
|
"preboot=usb start\0" \
|
|
|
|
"stdin=serial,usbkbd\0"
|
|
|
|
#else
|
2014-08-13 05:55:06 +00:00
|
|
|
#define CONSOLE_STDIN_SETTINGS \
|
|
|
|
"stdin=serial\0"
|
2014-09-18 19:03:34 +00:00
|
|
|
#endif
|
2014-08-13 05:55:06 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
|
|
#define CONSOLE_STDOUT_SETTINGS \
|
|
|
|
"stdout=serial,vga\0" \
|
|
|
|
"stderr=serial,vga\0"
|
|
|
|
#else
|
|
|
|
#define CONSOLE_STDOUT_SETTINGS \
|
|
|
|
"stdout=serial\0" \
|
|
|
|
"stderr=serial\0"
|
|
|
|
#endif
|
|
|
|
|
2017-02-27 17:22:11 +00:00
|
|
|
#ifdef CONFIG_MTDIDS_DEFAULT
|
|
|
|
#define SUNXI_MTDIDS_DEFAULT \
|
|
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
|
|
|
|
#else
|
|
|
|
#define SUNXI_MTDIDS_DEFAULT
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_MTDPARTS_DEFAULT
|
|
|
|
#define SUNXI_MTDPARTS_DEFAULT \
|
|
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
|
|
|
|
#else
|
|
|
|
#define SUNXI_MTDPARTS_DEFAULT
|
|
|
|
#endif
|
|
|
|
|
2014-08-13 05:55:06 +00:00
|
|
|
#define CONSOLE_ENV_SETTINGS \
|
|
|
|
CONSOLE_STDIN_SETTINGS \
|
|
|
|
CONSOLE_STDOUT_SETTINGS
|
|
|
|
|
2014-07-31 21:04:45 +00:00
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
2014-08-13 05:55:06 +00:00
|
|
|
CONSOLE_ENV_SETTINGS \
|
2014-08-01 07:37:58 +00:00
|
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
2015-10-25 04:44:46 +00:00
|
|
|
DFU_ALT_INFO_RAM \
|
2015-04-18 21:32:23 +00:00
|
|
|
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
|
2014-08-01 07:37:58 +00:00
|
|
|
"console=ttyS0,115200\0" \
|
2017-02-27 17:22:11 +00:00
|
|
|
SUNXI_MTDIDS_DEFAULT \
|
|
|
|
SUNXI_MTDPARTS_DEFAULT \
|
2015-10-09 16:11:15 +00:00
|
|
|
BOOTCMD_SUNXI_COMPAT \
|
2014-07-31 21:04:45 +00:00
|
|
|
BOOTENV
|
|
|
|
|
|
|
|
#else /* ifndef CONFIG_SPL_BUILD */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS
|
2014-05-05 10:52:26 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#endif /* _SUNXI_COMMON_CONFIG_H */
|