mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
74 lines
1.9 KiB
Text
74 lines
1.9 KiB
Text
|
Introduction
|
||
|
|
============
|
||
|
|
|
||
|
|
RK3399 key features we might use in U-Boot:
|
||
|
|
* CPU: ARMv8 64bit Big-Little architecture,
|
||
|
|
* Big: dual-core Cortex-A72
|
||
|
|
* Little: quad-core Cortex-A53
|
||
|
|
* IRAM: 200KB
|
||
|
|
* DRAM: 4GB-128MB dual-channel
|
||
|
|
* eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50
|
||
|
|
* SD/MMC: support SD 3.0, MMC 4.51
|
||
|
|
* USB: USB3.0 typc-C port *2 with dwc3 controller
|
||
|
|
* USB2.0 EHCI host port *2
|
||
|
|
* Display: RGB/HDMI/DP/MIPI/EDP
|
||
|
|
|
||
|
|
evb key features:
|
||
|
|
* regulator: pwm regulator for CPU B/L
|
||
|
|
* PMIC: rk808
|
||
|
|
* debug console: UART2
|
||
|
|
|
||
|
|
In order to support Arm Trust Firmware(ATF), we need to use the
|
||
|
|
miniloader from rockchip which:
|
||
|
|
* do DRAM init
|
||
|
|
* load and verify ATF image
|
||
|
|
* load and verify U-Boot image
|
||
|
|
|
||
|
|
Here is the step-by-step to boot to U-Boot on rk3399.
|
||
|
|
|
||
|
|
Get the Source and prebuild binary
|
||
|
|
==================================
|
||
|
|
|
||
|
|
> mkdir ~/evb_rk3399
|
||
|
|
> cd ~/evb_rk3399
|
||
|
|
> git clone https://github.com/ARM-software/arm-trusted-firmware.git
|
||
|
|
> git clone https://github.com/rockchip-linux/rkbin
|
||
|
|
> git clone https://github.com/rockchip-linux/rkflashtool
|
||
|
|
|
||
|
|
Compile the ATF
|
||
|
|
===============
|
||
|
|
|
||
|
|
> cd arm-trusted-firmware
|
||
|
|
> make realclean
|
||
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
|
||
|
|
|
||
|
|
Compile the U-Boot
|
||
|
|
==================
|
||
|
|
|
||
|
|
> cd ../u-boot
|
||
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3399_defconfig all
|
||
|
|
|
||
|
|
Compile the rkflashtool
|
||
|
|
=======================
|
||
|
|
|
||
|
|
> cd ../rkflashtool
|
||
|
|
> make
|
||
|
|
|
||
|
|
Package the image for miniloader
|
||
|
|
================================
|
||
|
|
> cd ..
|
||
|
|
> cp arm-trusted-firmware/build/rk3399/release/bl31.bin rkbin/rk33
|
||
|
|
> ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini
|
||
|
|
> ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img
|
||
|
|
> mkdir image
|
||
|
|
> mv trust.img ./image/
|
||
|
|
> mv uboot.img ./image/rk3399evb-uboot.bin
|
||
|
|
|
||
|
|
Flash the image
|
||
|
|
===============
|
||
|
|
Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
|
||
|
|
|
||
|
|
> ./rkflashtool/rkflashloader rk3399evb
|
||
|
|
|
||
|
|
You should be able to get U-Boot log message in console/UART2 now.
|