Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-26 13:03:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/spl/spl_fit.c

490 lines
14 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
/*
* Copyright (C) 2016 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#include <common.h>
#include <errno.h>
#include <image.h>
libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h> Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-04 16:20:11 +00:00
#include <linux/libfdt.h>
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
#include <spl.h>
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
#ifndef CONFIG_SYS_BOOTM_LEN
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
#endif
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
/**
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
* spl_fit_get_image_name(): By using the matching configuration subnode,
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
* retrieve the name of an image, specified by a property name and an index
* into that.
* @fit: Pointer to the FDT blob.
* @images: Offset of the /images subnode.
* @type: Name of the property within the configuration subnode.
* @index: Index into the list of strings in this property.
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
* @outname: Name of the image
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
*
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
* Return: 0 on success, or a negative error number
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
*/
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
static int spl_fit_get_image_name(const void *fit, int images,
const char *type, int index,
char **outname)
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
{
const char *name, *str;
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
__maybe_unused int node;
int conf_node;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
int len, i;
spl: fit: Break out some functions into a common file Some of the functions within spl_fit will be used for non spl purposes. Instead of duplicating functions simply break the functions to be reused into its own file. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Only add the new define to image.h, otherwise we see breakage due to massive include leakage into host tools in some cases] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-16 22:25:05 +00:00
conf_node = fit_find_config_node(fit);
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
if (conf_node < 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("No matching DT out of these options:\n");
for (node = fdt_first_subnode(fit, conf_node);
node >= 0;
node = fdt_next_subnode(fit, node)) {
name = fdt_getprop(fit, node, "description", &len);
printf(" %s\n", name);
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
}
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
#endif
return conf_node;
}
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
name = fdt_getprop(fit, conf_node, type, &len);
if (!name) {
debug("cannot find property '%s': %d\n", type, len);
return -EINVAL;
}
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
str = name;
for (i = 0; i < index; i++) {
str = strchr(str, '\0') + 1;
if (!str || (str - name >= len)) {
debug("no string for index %d\n", index);
return -E2BIG;
}
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
}
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
*outname = (char *)str;
return 0;
}
/**
* spl_fit_get_image_node(): By using the matching configuration subnode,
* retrieve the name of an image, specified by a property name and an index
* into that.
* @fit: Pointer to the FDT blob.
* @images: Offset of the /images subnode.
* @type: Name of the property within the configuration subnode.
* @index: Index into the list of strings in this property.
*
* Return: the node offset of the respective image node or a negative
* error number.
*/
static int spl_fit_get_image_node(const void *fit, int images,
const char *type, int index)
{
char *str;
int err;
int node;
err = spl_fit_get_image_name(fit, images, type, index, &str);
if (err)
return err;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
debug("%s: '%s'\n", type, str);
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
node = fdt_subnode_offset(fit, images, str);
if (node < 0) {
debug("cannot find image node '%s': %d\n", str, node);
return -EINVAL;
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
}
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
return node;
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
}
spl: Allow to load a FIT containing U-Boot from FS This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24 05:04:38 +00:00
static int get_aligned_image_offset(struct spl_load_info *info, int offset)
{
/*
* If it is a FS read, get the first address before offset which is
* aligned to ARCH_DMA_MINALIGN. If it is raw read return the
* block number to which offset belongs.
*/
if (info->filename)
return offset & ~(ARCH_DMA_MINALIGN - 1);
return offset / info->bl_len;
}
static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
{
/*
* If it is a FS read, get the difference between the offset and
* the first address before offset which is aligned to
* ARCH_DMA_MINALIGN. If it is raw read return the offset within the
* block.
*/
if (info->filename)
return offset & (ARCH_DMA_MINALIGN - 1);
return offset % info->bl_len;
}
static int get_aligned_image_size(struct spl_load_info *info, int data_size,
int offset)
{
spl: fit: Fix the number of bytes read in raw mode In raw mode a full sector is to be read even if image covers part of a sector. Number of sectors are calculated as ROUND_UP(size)/sec_size by FIT framework. This calculation assumes that image is at the 0th offset of a sector, which is not true always in FIT case. So, include the image offset while calculating number of sectors. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-19 09:26:14 +00:00
data_size = data_size + get_aligned_image_overhead(info, offset);
spl: Allow to load a FIT containing U-Boot from FS This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24 05:04:38 +00:00
if (info->filename)
spl: fit: Fix the number of bytes read in raw mode In raw mode a full sector is to be read even if image covers part of a sector. Number of sectors are calculated as ROUND_UP(size)/sec_size by FIT framework. This calculation assumes that image is at the 0th offset of a sector, which is not true always in FIT case. So, include the image offset while calculating number of sectors. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-19 09:26:14 +00:00
return data_size;
spl: Allow to load a FIT containing U-Boot from FS This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24 05:04:38 +00:00
return (data_size + info->bl_len - 1) / info->bl_len;
}
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
/**
* spl_load_fit_image(): load the image described in a certain FIT node
* @info: points to information about the device to load data from
* @sector: the start sector of the FIT image on the device
* @fit: points to the flattened device tree blob describing the FIT
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
* image
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
* @base_offset: the beginning of the data area containing the actual
* image data, relative to the beginning of the FIT
* @node: offset of the DT node describing the image to load (relative
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
* to @fit)
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
* @image_info: will be filled with information about the loaded image
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
* If the FIT node does not contain a "load" (address) property,
* the image gets loaded to the address pointed to by the
* load_addr member in this struct.
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
*
* Return: 0 on success or a negative error number.
*/
static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
void *fit, ulong base_offset, int node,
struct spl_image_info *image_info)
{
spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:44 +00:00
int offset;
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
size_t length;
spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:44 +00:00
int len;
spl: Fix compiling warning on gunzip argument common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’ from incompatible pointer type [-Wincompatible-pointer-types] src, &length)) Signed-off-by: York Sun <york.sun@nxp.com> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-09-15 15:21:13 +00:00
ulong size;
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
ulong load_addr, load_ptr;
void *src;
ulong overhead;
int nr_sectors;
int align_len = ARCH_DMA_MINALIGN - 1;
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
uint8_t image_comp = -1, type = -1;
spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:44 +00:00
const void *data;
SPL: Add FIT data-position property support For external data, FIT has a optional property "data-position" which can set the external data to a fixed offset to FIT beginning. Add the support for this property in SPL FIT. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tomas Melin <tomas.melin@vaisala.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: "Andrew F. Davis" <afd@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: "tomas.melin@vaisala.com" <tomas.melin@vaisala.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: York Sun <york.sun@nxp.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: "Cooper Jr., Franklin" <fcooper@ti.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Rick Altherr <raltherr@google.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-05 05:20:59 +00:00
bool external_data = false;
SPL: Add signature verification when loading image U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-02-27 08:55:58 +00:00
#ifdef CONFIG_SPL_FIT_SIGNATURE
int ret;
#endif
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP)) {
if (fit_image_get_comp(fit, node, &image_comp))
puts("Cannot get image compression format.\n");
else
debug("%s ", genimg_get_comp_name(image_comp));
if (fit_image_get_type(fit, node, &type))
puts("Cannot get image type.\n");
else
debug("%s ", genimg_get_type_name(type));
}
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:44 +00:00
if (fit_image_get_load(fit, node, &load_addr))
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
load_addr = image_info->load_addr;
SPL: Add FIT data-position property support For external data, FIT has a optional property "data-position" which can set the external data to a fixed offset to FIT beginning. Add the support for this property in SPL FIT. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tomas Melin <tomas.melin@vaisala.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: "Andrew F. Davis" <afd@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: "tomas.melin@vaisala.com" <tomas.melin@vaisala.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: York Sun <york.sun@nxp.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: "Cooper Jr., Franklin" <fcooper@ti.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Rick Altherr <raltherr@google.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-05 05:20:59 +00:00
if (!fit_image_get_data_position(fit, node, &offset)) {
external_data = true;
} else if (!fit_image_get_data_offset(fit, node, &offset)) {
spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:44 +00:00
offset += base_offset;
SPL: Add FIT data-position property support For external data, FIT has a optional property "data-position" which can set the external data to a fixed offset to FIT beginning. Add the support for this property in SPL FIT. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tomas Melin <tomas.melin@vaisala.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: "Andrew F. Davis" <afd@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: "tomas.melin@vaisala.com" <tomas.melin@vaisala.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: York Sun <york.sun@nxp.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: "Cooper Jr., Franklin" <fcooper@ti.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Rick Altherr <raltherr@google.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-05 05:20:59 +00:00
external_data = true;
}
if (external_data) {
/* External data */
spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:44 +00:00
if (fit_image_get_data_size(fit, node, &len))
return -ENOENT;
load_ptr = (load_addr + align_len) & ~align_len;
length = len;
overhead = get_aligned_image_overhead(info, offset);
nr_sectors = get_aligned_image_size(info, length, offset);
if (info->read(info,
sector + get_aligned_image_offset(info, offset),
nr_sectors, (void *)load_ptr) != nr_sectors)
return -EIO;
debug("External data: dst=%lx, offset=%x, size=%lx\n",
load_ptr, offset, (unsigned long)length);
src = (void *)load_ptr + overhead;
} else {
/* Embedded data */
if (fit_image_get_data(fit, node, &data, &length)) {
puts("Cannot get image data/size\n");
return -ENOENT;
}
debug("Embedded data: dst=%lx, size=%lx\n", load_addr,
(unsigned long)length);
src = (void *)data;
}
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
board_fit_image_post_process(&src, &length);
#endif
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
if (IS_ENABLED(CONFIG_SPL_OS_BOOT) &&
IS_ENABLED(CONFIG_SPL_GZIP) &&
image_comp == IH_COMP_GZIP &&
type == IH_TYPE_KERNEL) {
spl: Fix compiling warning on gunzip argument common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’ from incompatible pointer type [-Wincompatible-pointer-types] src, &length)) Signed-off-by: York Sun <york.sun@nxp.com> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-09-15 15:21:13 +00:00
size = length;
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
if (gunzip((void *)load_addr, CONFIG_SYS_BOOTM_LEN,
spl: Fix compiling warning on gunzip argument common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’ from incompatible pointer type [-Wincompatible-pointer-types] src, &length)) Signed-off-by: York Sun <york.sun@nxp.com> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-09-15 15:21:13 +00:00
src, &size)) {
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
puts("Uncompressing error\n");
return -EIO;
}
spl: Fix compiling warning on gunzip argument common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’ from incompatible pointer type [-Wincompatible-pointer-types] src, &length)) Signed-off-by: York Sun <york.sun@nxp.com> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-09-15 15:21:13 +00:00
length = size;
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
} else {
memcpy((void *)load_addr, src, length);
}
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
if (image_info) {
image_info->load_addr = load_addr;
image_info->size = length;
image_info->entry_point = fdt_getprop_u32(fit, node, "entry");
}
SPL: Add signature verification when loading image U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-02-27 08:55:58 +00:00
#ifdef CONFIG_SPL_FIT_SIGNATURE
printf("## Checking hash(es) for Image %s ...\n",
fit_get_name(fit, node, NULL));
ret = fit_image_verify_with_data(fit, node,
(const void *)load_addr, length);
printf("\n");
return !ret;
#else
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
return 0;
SPL: Add signature verification when loading image U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-02-27 08:55:58 +00:00
#endif
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
}
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
static int spl_fit_append_fdt(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector,
void *fit, int images, ulong base_offset)
{
struct spl_image_info image_info;
int node, ret;
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
if (node < 0) {
debug("%s: cannot find FDT node\n", __func__);
return node;
}
/*
* Read the device tree and place it after the image.
* Align the destination address to ARCH_DMA_MINALIGN.
*/
image_info.load_addr = spl_image->load_addr + spl_image->size;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
if (ret < 0)
return ret;
/* Make the load-address of the FDT available for the SPL framework */
spl_image->fdt_addr = (void *)image_info.load_addr;
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
/* Try to make space, so we can inject details on the loadables */
ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
#endif
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
return ret;
}
static int spl_fit_record_loadable(const void *fit, int images, int index,
void *blob, struct spl_image_info *image)
{
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
int ret = 0;
#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
char *name;
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
int node;
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
ret = spl_fit_get_image_name(fit, images, "loadables",
index, &name);
if (ret < 0)
return ret;
node = spl_fit_get_image_node(fit, images, "loadables", index);
ret = fdt_record_loadable(blob, index, name, image->load_addr,
image->size, image->entry_point,
fdt_getprop(fit, node, "type", NULL),
fdt_getprop(fit, node, "os", NULL));
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
#endif
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
return ret;
}
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
{
#if CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
return -ENOTSUPP;
#else
return fit_image_get_os(fit, noffset, os);
#endif
}
spl: Update spl_load_simple_fit() to take an spl_image param Upda the SPL FIT code to use the spl_image parameter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:20:16 +00:00
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
{
int sectors;
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
ulong size;
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
unsigned long count;
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
struct spl_image_info image_info;
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
int node = -1;
int images, ret;
spl: Allow to load a FIT containing U-Boot from FS This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24 05:04:38 +00:00
int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
SPL: FIT: allow loading multiple images So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:37 +00:00
int index = 0;
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
/*
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
* For FIT with external data, figure out where the external images
* start. This is the base for the data-offset properties in each
* image.
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
*/
size = fdt_totalsize(fit);
size = (size + 3) & ~3;
base_offset = (size + 3) & ~3;
/*
* So far we only have one block of data from the FIT. Read the entire
* thing, including that first block, placing it so it finishes before
* where we will load the image.
*
* Note that we will load the image such that its first byte will be
* at the load address. Since that byte may be part-way through a
* block, we may load the image up to one block before the load
* address. So take account of that here by subtracting an addition
* block length from the FIT start position.
*
* In fact the FIT has its own load address, but we assume it cannot
* be before CONFIG_SYS_TEXT_BASE.
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
*
* For FIT with data embedded, data is loaded as part of FIT image.
* For FIT with external data, data is not loaded in this step.
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
*/
spl: fit: Fix load address of fit header When loading fit header, it should be loaded to a previous address aligned to ARCH_DMA_MINALIGN and not 8. Fixing the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-01 04:58:31 +00:00
fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
align_len) & ~align_len);
spl: Allow to load a FIT containing U-Boot from FS This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24 05:04:38 +00:00
sectors = get_aligned_image_size(info, size, 0);
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
count = info->read(info, sector, sectors, fit);
debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
sector, sectors, fit, count);
if (count == 0)
return -EIO;
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
/* find the node holding the images information */
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
images = fdt_path_offset(fit, FIT_IMAGES_PATH);
if (images < 0) {
debug("%s: Cannot find /images node: %d\n", __func__, images);
return -1;
}
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
/*
* Find the U-Boot image using the following search order:
* - start at 'firmware' (e.g. an ARM Trusted Firmware)
* - fall back 'kernel' (e.g. a Falcon-mode OS boot
* - fall back to using the first 'loadables' entry
*/
if (node < 0)
image: fit: Show firmware configuration property if present SPL ATF support requires to have firmware property which should be also listed by mkimage -l when images is created. The patch is also using this macro in spl_fit to match keyword. When image is created: Default Configuration: 'config' Configuration 0 (config) Description: ATF with full u-boot Kernel: unavailable Firmware: atf FDT: dtb Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-26 14:31:26 +00:00
node = spl_fit_get_image_node(fit, images, FIT_FIRMWARE_PROP,
0);
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
#ifdef CONFIG_SPL_OS_BOOT
if (node < 0)
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
#endif
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
if (node < 0) {
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(fit, images, "loadables", 0);
SPL: FIT: allow loading multiple images So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:37 +00:00
/*
* If we pick the U-Boot image from "loadables", start at
* the second image when later loading additional images.
*/
index = 1;
SPL: FIT: rework U-Boot image loading Currently the SPL FIT loader always looks only for the first image in the /images node a FIT tree, which it loads and later executes. Generalize this by looking for a "firmware" property in the matched configuration subnode, or, if that does not exist, for the first string in the "loadables" property. Then using the string in that property, load the image of that name from the /images node. This still loads only one image at the moment, but refactors the code to allow extending this in a following patch. To simplify later re-usage, we also generalize the spl_fit_select_index() function to not return the image location, but just the node offset. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:34 +00:00
}
if (node < 0) {
debug("%s: Cannot find u-boot image node: %d\n",
__func__, node);
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
return -1;
}
SPL: FIT: factor out spl_load_fit_image() At the moment we load two images from a FIT image: the actual U-Boot image and the .dtb file. Both times we have very similar code, that deals with alignment requirements the media we load from imposes upon us. Factor out this code into a new function, which we just call twice. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:36 +00:00
/* Load the image and set up the spl_image structure */
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
spl_image);
if (ret)
return ret;
spl: fit: add support for post-processing of images The next stage boot loader image and the selected FDT can be post- processed by board/platform/device-specific code, which can include modifying the size and altering the starting source address before copying these binary blobs to their final destination. This might be desired to do things like strip headers or footers attached to the images before they were packaged into the FIT, or to perform operations such as decryption or authentication. Introduce new configuration option CONFIG_SPL_FIT_IMAGE_POST_PROCESS to allow controlling this feature. If enabled, a platform-specific post-process function must be provided. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-27 14:19:21 +00:00
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
/*
* For backward compatibility, we treat the first node that is
* as a U-Boot image, if no OS-type has been declared.
*/
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
if (!spl_fit_image_get_os(fit, node, &spl_image->os))
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
#if !defined(CONFIG_SPL_OS_BOOT)
else
spl_image->os = IH_OS_U_BOOT;
spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:45 +00:00
#endif
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
/*
* Booting a next-stage U-Boot may require us to append the FDT.
* We allow this to fail, as the U-Boot image might embed its FDT.
*/
if (spl_image->os == IH_OS_U_BOOT)
spl_fit_append_fdt(spl_image, info, sector, fit,
images, base_offset);
SPL: FIT: allow loading multiple images So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:37 +00:00
/* Now check if there are more images for us to load */
for (; ; index++) {
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
uint8_t os_type = IH_OS_INVALID;
SPL: FIT: allow loading multiple images So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:37 +00:00
node = spl_fit_get_image_node(fit, images, "loadables", index);
if (node < 0)
break;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
continue;
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
if (!spl_fit_image_get_os(fit, node, &os_type))
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
debug("Loadable is %s\n", genimg_get_os_name(os_type));
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
if (os_type == IH_OS_U_BOOT) {
spl_fit_append_fdt(&image_info, info, sector,
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
fit, images, base_offset);
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
spl_image->fdt_addr = image_info.fdt_addr;
}
spl: fit: simplify logic for FDT loading for non-OS boots To better support bootin through an ATF or OPTEE, we need to streamline some of the logic for when the FDT is appended to an image: depending on the image type, we'd like to append the FDT not at all (the case for the OS boot), to the 'firmware' image (if it is a U-Boot) or to one of the loadables (if the 'firmware' is an ATF, an OPTEE, or some other image-type and U-Boot is listed in the loadabled). To achieve this goal, we drop the os_boot flag and track the type of image loaded. If it is of type IH_OS_U_BOOT, we append the FDT. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:32 +00:00
SPL: FIT: allow loading multiple images So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:37 +00:00
/*
* If the "firmware" image did not provide an entry point,
* use the first valid entry point from the loadables.
*/
if (spl_image->entry_point == FDT_ERROR &&
image_info.entry_point != FDT_ERROR)
spl_image->entry_point = image_info.entry_point;
spl: fit: implement recording of loadables into /fit-images If a FDT was loaded (e.g. to append it to U-Boot image), we store it's address and record information for all loadables into this FDT. This allows us to easily keep track of images for multiple privilege levels (e.g. with ATF) or of firmware images preloaded into temporary locations (e.g. PMU firmware that may overlap the SPL stage). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:34 +00:00
/* Record our loadables into the FDT */
if (spl_image->fdt_addr)
spl_fit_record_loadable(fit, images, index,
spl_image->fdt_addr,
&image_info);
SPL: FIT: allow loading multiple images So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:37 +00:00
}
/*
* If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
* Makefile will set it to 0 and it will end up as the entry point
* here. What it actually means is: use the load address.
*/
if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0)
spl_image->entry_point = spl_image->load_addr;
return 0;
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:56 +00:00
}
Reference in a new issue Copy permalink