u-boot/arch/arm/dts/sun50i-a64-pinephone-1.2.dts

55 lines
1.3 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
/dts-v1/;
#include "sun50i-a64-pinephone.dtsi"
/ {
model = "Pine64 PinePhone (1.2)";
compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64";
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&backlight {
power-supply = <&reg_ldo_io0>;
/*
* PWM backlight circuit on this PinePhone revision was changed since 1.0,
* and the lowest PWM duty cycle that doesn't lead to backlight being off
* is around 10%. Duty cycle for the lowest brightness level also varries
* quite a bit between individual boards, so the lowest value here was
* chosen as a safe default.
*/
brightness-levels = <
5000 5248 5506 5858 6345
6987 7805 8823 10062 11543
13287 15317 17654 20319 23336
26724 30505 34702 39335 44427
50000
>;
num-interpolated-steps = <50>;
default-brightness-level = <500>;
};
&lis3mdl {
/*
* Board revision 1.2 fixed routing of the interrupt to DRDY pin,
* enable interrupts.
*/
interrupt-parent = <&pio>;
interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
};
&mmc1 {
mmc-pwrseq = <&wifi_pwrseq>;
};
&sgm3140 {
enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
};