u-boot/arch/arm/dts/zynq-topic-miamiplus.dts

// SPDX-License-Identifier: GPL-2.0+
/*
 * Topic Miami Plus board DTS
 *
 * Copyright (C) 2016 Topic Embedded Products
 */
#include "zynq-topic-miami.dts"

/ {
	model = "Topic Miami+ Zynq Board";
	compatible = "topic,miamiplus", "xlnx,zynq-7000";
};

/* The miamiplus contains a speedgrade-2 device and runs at 800MHz */
&cpu0 {
	operating-points = <
		/* kHz    uV */
		800000  1000000
		400000  1000000
	>;
};

&qspi {
	is-dual = <1>;
};
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`// SPDX-License-Identifier: GPL-2.0+`
ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2016-09-30 06:13:13 +00:00			`/*`
			`* Topic Miami Plus board DTS`
			`*`
			`* Copyright (C) 2016 Topic Embedded Products`
			`*/`
			`#include "zynq-topic-miami.dts"`

			`/ {`
			`model = "Topic Miami+ Zynq Board";`
			`compatible = "topic,miamiplus", "xlnx,zynq-7000";`
			`};`

topic-miamiplus: Run CPU at 800MHz for speedgrade-2 The miamiplus contains a speedgrade-2 device, which may run the CPU at 800MHz. Change the PLL setting to 800MHz, and adapt the setpoints in the devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2019-01-18 08:02:47 +00:00			`/* The miamiplus contains a speedgrade-2 device and runs at 800MHz */`
			`&cpu0 {`
			`operating-points = <`
			`/* kHz uV */`
			`800000 1000000`
			`400000 1000000`
			`>;`
			`};`

ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2016-09-30 06:13:13 +00:00			`&qspi {`
			`is-dual = <1>;`
			`};`