Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-04 18:41:03 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/k3-j721e-common-proc-board.dts

977 lines
23 KiB
Text
Raw Normal View History

arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
* Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
*
* Product Link: https://www.ti.com/tool/J721EXCPXEVM
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
*/
/dts-v1/;
#include "k3-j721e-som-p0.dtsi"
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card Add support for regulators to power cycle and switch IO voltage to the SD card. This enables support for UHS modes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:40:58 +00:00
#include <dt-bindings/gpio/gpio.h>
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
#include <dt-bindings/input/input.h>
#include <dt-bindings/net/ti-dp83867.h>
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
#include <dt-bindings/phy/phy-cadence.h>
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
/ {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
compatible = "ti,j721e-evm", "ti,j721e";
model = "Texas Instruments J721e EVM";
aliases {
serial0 = &wkup_uart0;
serial1 = &mcu_uart0;
serial2 = &main_uart0;
serial3 = &main_uart1;
serial4 = &main_uart2;
serial6 = &main_uart4;
ethernet0 = &cpsw_port1;
mmc0 = &main_sdhci0;
mmc1 = &main_sdhci1;
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
chosen {
stdout-path = "serial2:115200n8";
};
arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS) subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within the MCU domain, and the remaining two clusters are present in the MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - ATCM and BTCM (further interleaved into two banks). There are some IP integration differences from standard Arm R5 clusters such as the absence of an ACP port, presence of an additional TI-specific Region Address Translater (RAT) module for translating 32-bit CPU addresses into larger system bus addresses etc. Add the DT node for the MCU domain R5F cluster/subsystem, the two R5 cores are added as child nodes to the main cluster/subsystem node. The cluster is configured to run in LockStep mode by default, with the ATCMs enabled to allow the R5 cores to execute code from DDR with boot-strapping code from ATCM. The inter-processor communication between the main A72 cores and these processors is achieved through shared memory and Mailboxes. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-04 10:31:37 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
gpio_keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
sw10: switch-10 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
sw11: switch-11 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
};
};
evm_12v0: fixedregulator-evm12v0 {
/* main supply */
compatible = "regulator-fixed";
regulator-name = "evm_12v0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
regulator-boot-on;
};
vsys_3v3: fixedregulator-vsys3v3 {
/* Output of LMS140 */
compatible = "regulator-fixed";
regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&evm_12v0>;
regulator-always-on;
regulator-boot-on;
};
vsys_5v0: fixedregulator-vsys5v0 {
/* Output of LM5140 */
compatible = "regulator-fixed";
regulator-name = "vsys_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&evm_12v0>;
regulator-always-on;
regulator-boot-on;
arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS) subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within the MCU domain, and the remaining two clusters are present in the MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - ATCM and BTCM (further interleaved into two banks). There are some IP integration differences from standard Arm R5 clusters such as the absence of an ACP port, presence of an additional TI-specific Region Address Translater (RAT) module for translating 32-bit CPU addresses into larger system bus addresses etc. Add the DT node for the MCU domain R5F cluster/subsystem, the two R5 cores are added as child nodes to the main cluster/subsystem node. The cluster is configured to run in LockStep mode by default, with the ATCMs enabled to allow the R5 cores to execute code from DDR with boot-strapping code from ATCM. The inter-processor communication between the main A72 cores and these processors is achieved through shared memory and Mailboxes. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-04 10:31:37 +00:00
};
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card Add support for regulators to power cycle and switch IO voltage to the SD card. This enables support for UHS modes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:40:58 +00:00
vdd_mmc1: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
vin-supply = <&vsys_3v3>;
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card Add support for regulators to power cycle and switch IO voltage to the SD card. This enables support for UHS modes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:40:58 +00:00
gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
};
vdd_sd_dv_alt: gpio-regulator-TLV71033 {
compatible = "regulator-gpio";
pinctrl-names = "default";
pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
regulator-name = "tlv71033";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
vin-supply = <&vsys_5v0>;
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card Add support for regulators to power cycle and switch IO voltage to the SD card. This enables support for UHS modes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:40:58 +00:00
gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
states = <1800000 0x0>,
<3300000 0x1>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
sound0: sound-0 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
compatible = "ti,j721e-cpb-audio";
model = "j721e-cpb";
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
clocks = <&k3_clks 184 1>,
<&k3_clks 184 2>, <&k3_clks 184 4>,
<&k3_clks 157 371>,
<&k3_clks 157 400>, <&k3_clks 157 401>;
clock-names = "cpb-mcasp-auxclk",
"cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
"cpb-codec-scki",
"cpb-codec-scki-48000", "cpb-codec-scki-44100";
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
transceiver1: can-phy0 {
compatible = "ti,tcan1043";
#phy-cells = <0>;
max-bitrate = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>;
enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
};
transceiver2: can-phy1 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
};
transceiver3: can-phy2 {
compatible = "ti,tcan1043";
#phy-cells = <0>;
max-bitrate = <5000000>;
standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
};
transceiver4: can-phy3 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&main_mcan2_gpio_pins_default>;
standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
};
dp_pwr_3v3: regulator-dp-pwr {
compatible = "regulator-fixed";
regulator-name = "dp-pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */
enable-active-high;
};
dp0: connector {
compatible = "dp-connector";
label = "DP0";
type = "full-size";
dp-pwr-supply = <&dp_pwr_3v3>;
port {
dp_connector_in: endpoint {
remote-endpoint = <&dp0_out>;
};
};
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
&main_pmx0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */
J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */
J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
>;
};
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
>;
};
main_uart2_pins_default: main-uart2-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */
J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */
>;
};
main_uart4_pins_default: main-uart4-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */
J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */
>;
};
sw10_button_pins_default: sw10-button-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_mmc1_pins_default: main-mmc1-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_usbss0_pins_default: main-usbss0-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_usbss1_pins_default: main-usbss1-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
dp0_pins_default: dp0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
>;
};
main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_i2c0_pins_default: main-i2c0-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_i2c1_pins_default: main-i2c1-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_i2c3_pins_default: main-i2c3-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_i2c6_pins_default: main-i2c6-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcasp10_pins_default: mcasp10-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_mcan0_pins_default: main-mcan0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
>;
};
main_mcan2_pins_default: main-mcan2-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */
J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */
>;
};
main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
>;
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
&wkup_pmx0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
wkup_uart0_pins_default: wkup-uart0-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_uart0_pins_default: mcu-uart0-default-pins {
arm: dts: k3-j721e-common-proc-board: enable hyperflash mux sel GPIO Add wkup_gpio pinmux setting which will be used for performing the DT fixup for hbmc node according to mux selection state, on J721E EVM, hypermux sel is tied to ·WKUP_GPIO0_8. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
2022-05-09 06:20:13 +00:00
pinctrl-single,pins = <
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */
J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */
J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
>;
};
sw11_button_pins_default: sw11-button-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
arm: dts: k3-j721e-common-proc-board: enable hyperflash mux sel GPIO Add wkup_gpio pinmux setting which will be used for performing the DT fixup for hbmc node according to mux selection state, on J721E EVM, hypermux sel is tied to ·WKUP_GPIO0_8. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
2022-05-09 06:20:13 +00:00
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_mdio_pins_default: mcu-mdio1-default-pins {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
>;
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card Add support for regulators to power cycle and switch IO voltage to the SD card. This enables support for UHS modes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:40:58 +00:00
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_mcan0_pins_default: mcu-mcan0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
>;
};
arm: dts: k3-j721e-common-proc-board: Mark main_uart0 as shared device Main uart0 is used as debug console by both R5SPL and A72 bootloader and Linux. So mark it as shared device so that power-domain request is successful by both cores. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-29 12:07:58 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */
J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */
>;
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_mcan1_pins_default: mcu-mcan1-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */
J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */
>;
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */
>;
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
wkup_gpio_pins_default: wkup-gpio-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */
>;
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&wkup_uart0 {
/* Wakeup UART is used by System firmware */
status = "reserved";
pinctrl-names = "default";
pinctrl-0 = <&wkup_uart0_pins_default>;
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&mcu_uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_uart0_pins_default>;
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
/* Shared with ATF on this platform */
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card Add support for regulators to power cycle and switch IO voltage to the SD card. This enables support for UHS modes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 09:40:58 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart2_pins_default>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart4_pins_default>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&wkup_gpio0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_gpio_pins_default>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_gpio0 {
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_gpio1 {
status = "okay";
arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card Add pinmux for sdhci1 node connected to the SD card. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-16 14:12:21 +00:00
};
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
&main_sdhci0 {
/* eMMC */
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
non-removable;
ti,driver-strength-ohm = <50>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
disable-wp;
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
};
&main_sdhci1 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
/* SD/MMC */
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vdd_sd_dv_alt>;
arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card Add pinmux for sdhci1 node connected to the SD card. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-16 14:12:21 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
ti,driver-strength-ohm = <50>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
disable-wp;
arm: dts: k3-j721e: Add initial support for common processor board Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:54 +00:00
};
arm: dts: k3-j721e: Add DT nodes for USB J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-18 13:46:35 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&usb_serdes_mux {
idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
};
arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander Add I2C GPIO expander required to power cycle MMC/SD Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-27 17:52:14 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&serdes_ln_ctrl {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
<J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
<J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
<J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
<J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
<J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
arm: dts: k3-j721e: Add DT nodes for USB J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-18 13:46:35 +00:00
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&serdes_wiz3 {
typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
};
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&serdes3 {
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
serdes3_usb_link: phy@0 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_USB3>;
resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
};
arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use Make the wkup_i2c0 module usable across all stages of U-Boot by adding the needed definitions including the associated pinmux definitions. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 07:45:56 +00:00
};
arm: dts: k3-j721e: Add DT nodes for USB J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-18 13:46:35 +00:00
&usbss0 {
pinctrl-names = "default";
pinctrl-0 = <&main_usbss0_pins_default>;
ti,vbus-divider;
};
&usb0 {
dr_mode = "otg";
maximum-speed = "super-speed";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
phys = <&serdes3_usb_link>;
phy-names = "cdns3,usb3-phy";
arm: dts: k3-j721e: Add DT nodes for USB J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-18 13:46:35 +00:00
};
&usbss1 {
pinctrl-names = "default";
pinctrl-0 = <&main_usbss1_pins_default>;
ti,usb2-only;
};
&usb1 {
dr_mode = "host";
maximum-speed = "high-speed";
};
arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use Make the wkup_i2c0 module usable across all stages of U-Boot by adding the needed definitions including the associated pinmux definitions. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 07:45:56 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&ospi1 {
arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use Make the wkup_i2c0 module usable across all stages of U-Boot by adding the needed definitions including the associated pinmux definitions. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 07:45:56 +00:00
pinctrl-names = "default";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
flash@0 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <40000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "qspi.tiboot3";
reg = <0x0 0x80000>;
};
partition@80000 {
label = "qspi.tispl";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "qspi.u-boot";
reg = <0x280000 0x400000>;
};
partition@680000 {
label = "qspi.env";
reg = <0x680000 0x20000>;
};
partition@6a0000 {
label = "qspi.env.backup";
reg = <0x6a0000 0x20000>;
};
partition@6c0000 {
label = "qspi.sysfw";
reg = <0x6c0000 0x100000>;
};
partition@800000 {
label = "qspi.rootfs";
reg = <0x800000 0x37c0000>;
};
partition@3fe0000 {
label = "qspi.phypattern";
reg = <0x3fe0000 0x20000>;
};
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
};
&tscadc0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&tscadc1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use Make the wkup_i2c0 module usable across all stages of U-Boot by adding the needed definitions including the associated pinmux definitions. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 07:45:56 +00:00
};
arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander Add I2C GPIO expander required to power cycle MMC/SD Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-27 17:52:14 +00:00
&main_i2c0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander Add I2C GPIO expander required to power cycle MMC/SD Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-27 17:52:14 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
exp1: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
exp2: gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
p09-hog {
/* P11 - MCASP/TRACE_MUX_S0 */
gpio-hog;
gpios = <9 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "MCASP/TRACE_MUX_S0";
};
p10-hog {
/* P12 - MCASP/TRACE_MUX_S1 */
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "MCASP/TRACE_MUX_S1";
};
arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander Add I2C GPIO expander required to power cycle MMC/SD Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-27 17:52:14 +00:00
};
};
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&main_i2c1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
pinctrl-names = "default";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
exp4: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_exp4_pins_default>;
interrupt-parent = <&main_gpio1>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&k3_clks {
/* Confiure AUDIO_EXT_REFCLK2 pin as output */
pinctrl-names = "default";
pinctrl-0 = <&audi_ext_refclk2_pins_default>;
};
&main_i2c3 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
exp3: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
pcm3168a_1: audio-codec@44 {
compatible = "ti,pcm3168a";
reg = <0x44>;
#sound-dai-cells = <1>;
reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
clocks = <&k3_clks 157 371>;
clock-names = "scki";
/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
assigned-clocks = <&k3_clks 157 371>;
assigned-clock-parents = <&k3_clks 157 400>;
assigned-clock-rates = <24576000>; /* for 48KHz */
VDD1-supply = <&vsys_3v3>;
VDD2-supply = <&vsys_3v3>;
VCCAD1-supply = <&vsys_5v0>;
VCCAD2-supply = <&vsys_5v0>;
VCCDA1-supply = <&vsys_5v0>;
VCCDA2-supply = <&vsys_5v0>;
};
};
&main_i2c6 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_i2c6_pins_default>;
clock-frequency = <400000>;
exp5: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&mcu_cpsw {
pinctrl-names = "default";
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
};
&dss {
/*
* These clock assignments are chosen to enable the following outputs:
*
* VP0 - DisplayPort SST
* VP1 - DPI0
* VP2 - DSI
* VP3 - DPI1
*/
assigned-clocks = <&k3_clks 152 1>,
<&k3_clks 152 4>,
<&k3_clks 152 9>,
<&k3_clks 152 13>;
assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */
<&k3_clks 152 6>, /* PLL19_HSDIV0 */
<&k3_clks 152 11>, /* PLL18_HSDIV0 */
<&k3_clks 152 18>; /* PLL23_HSDIV0 */
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&dss_ports {
port {
dpi0_out: endpoint {
remote-endpoint = <&dp0_in>;
};
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&dp0_ports {
#address-cells = <1>;
#size-cells = <0>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
port@0 {
reg = <0>;
dp0_in: endpoint {
remote-endpoint = <&dpi0_out>;
};
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
port@4 {
reg = <4>;
dp0_out: endpoint {
remote-endpoint = <&dp_connector_in>;
};
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
&mcasp10 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcasp10_pins_default>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
auxclk-fs-ratio = <256>;
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 1 1 1
2 2 2 0
>;
tx-num-evt = <0>;
rx-num-evt = <0>;
};
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
&cmn_refclk1 {
clock-frequency = <100000000>;
};
&wiz0_pll1_refclk {
assigned-clocks = <&wiz0_pll1_refclk>;
assigned-clock-parents = <&cmn_refclk1>;
};
&wiz0_refclk_dig {
assigned-clocks = <&wiz0_refclk_dig>;
assigned-clock-parents = <&cmn_refclk1>;
};
&wiz1_pll1_refclk {
assigned-clocks = <&wiz1_pll1_refclk>;
assigned-clock-parents = <&cmn_refclk1>;
};
&wiz1_refclk_dig {
assigned-clocks = <&wiz1_refclk_dig>;
assigned-clock-parents = <&cmn_refclk1>;
};
&wiz2_pll1_refclk {
assigned-clocks = <&wiz2_pll1_refclk>;
assigned-clock-parents = <&cmn_refclk1>;
};
&wiz2_refclk_dig {
assigned-clocks = <&wiz2_refclk_dig>;
assigned-clock-parents = <&cmn_refclk1>;
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&serdes0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
assigned-clock-parents = <&wiz0_pll1_refclk>;
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
serdes0_pcie_link: phy@0 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reg = <0>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz0 1>;
};
};
&serdes1 {
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
assigned-clock-parents = <&wiz1_pll1_refclk>;
serdes1_pcie_link: phy@0 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
};
};
&serdes2 {
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
assigned-clock-parents = <&wiz2_pll1_refclk>;
serdes2_pcie_link: phy@0 {
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
};
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&serdes4 {
torrent_phy_dp: phy@0 {
reg = <0>;
resets = <&serdes_wiz4 1>;
cdns,phy-type = <PHY_TYPE_DP>;
cdns,num-lanes = <4>;
cdns,max-bit-rate = <5400>;
#phy-cells = <0>;
};
};
&mhdp {
phys = <&torrent_phy_dp>;
phy-names = "dpphy";
pinctrl-names = "default";
pinctrl-0 = <&dp0_pins_default>;
};
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
&pcie0_rc {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
phys = <&serdes0_pcie_link>;
phy-names = "pcie-phy";
num-lanes = <1>;
};
&pcie1_rc {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
phys = <&serdes1_pcie_link>;
phy-names = "pcie-phy";
num-lanes = <2>;
};
&pcie2_rc {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
phys = <&serdes2_pcie_link>;
phy-names = "pcie-phy";
num-lanes = <2>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&mcu_mcan0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan0_pins_default>;
phys = <&transceiver1>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&mcu_mcan1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan1_pins_default>;
phys = <&transceiver2>;
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot Sync all J721e related v5.11-rc6 Linux kernel dts into U-Boot. HBMC nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid any regressions, hbmc nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-01 05:56:40 +00:00
};
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_mcan0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mcan0_pins_default>;
phys = <&transceiver3>;
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_mcan2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mcan2_pins_default>;
phys = <&transceiver4>;
arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10 21:37:43 +00:00
};
Reference in a new issue Copy permalink