u-boot/drivers/mtd/onenand/onenand_spl.c

201 lines
4.8 KiB
C
Raw Normal View History

/*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
*
* Based on code:
* Copyright (C) 2005-2009 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <linux/mtd/onenand_regs.h>
#include <onenand_uboot.h>
/*
* Device geometry:
* - 2048b page, 128k erase block.
* - 4096b page, 256k erase block.
*/
enum onenand_spl_pagesize {
PAGE_2K = 2048,
PAGE_4K = 4096,
};
static unsigned int density_mask;
#define ONENAND_PAGES_PER_BLOCK 64
#define onenand_sector_address(page) (page << 2)
#define onenand_buffer_address() ((1 << 3) << 8)
static inline int onenand_block_address(int block)
{
/* Device Flash Core select, NAND Flash Block Address */
if (block & density_mask)
return ONENAND_DDP_CHIP1 | (block ^ density_mask);
return block;
}
static inline int onenand_bufferram_address(int block)
{
/* Device BufferRAM Select */
if (block & density_mask)
return ONENAND_DDP_CHIP1;
return ONENAND_DDP_CHIP0;
}
static inline uint16_t onenand_readw(uint32_t addr)
{
return readw(CONFIG_SYS_ONENAND_BASE + addr);
}
static inline void onenand_writew(uint16_t value, uint32_t addr)
{
writew(value, CONFIG_SYS_ONENAND_BASE + addr);
}
static enum onenand_spl_pagesize onenand_spl_get_geometry(void)
{
unsigned int dev_id, density, size;
if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) {
dev_id = onenand_readw(ONENAND_REG_DEVICE_ID);
density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
density &= ONENAND_DEVICE_DENSITY_MASK;
if (density < ONENAND_DEVICE_DENSITY_4Gb)
return PAGE_2K;
if (dev_id & ONENAND_DEVICE_IS_DDP) {
size = onenand_readw(ONENAND_REG_DATA_BUFFER_SIZE);
density_mask = 1 << (18 + density - ffs(size));
return PAGE_2K;
}
}
return PAGE_4K;
}
static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf,
enum onenand_spl_pagesize pagesize)
{
const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM;
uint32_t offset;
onenand_writew(onenand_block_address(block),
ONENAND_REG_START_ADDRESS1);
onenand_writew(onenand_bufferram_address(block),
ONENAND_REG_START_ADDRESS2);
onenand_writew(onenand_sector_address(page),
ONENAND_REG_START_ADDRESS8);
onenand_writew(onenand_buffer_address(),
ONENAND_REG_START_BUFFER);
onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT);
onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND);
while (!(onenand_readw(ONENAND_REG_INTERRUPT) & ONENAND_INT_READ))
continue;
/* Check for invalid block mark */
if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff))
return 1;
for (offset = 0; offset < pagesize; offset += 4)
buf[offset / 4] = readl(addr + offset);
return 0;
}
#ifdef CONFIG_SPL_UBI
/* Temporary storage for non page aligned and non page sized reads. */
static u8 scratch_buf[PAGE_4K];
/**
* onenand_spl_read_block - Read data from physical eraseblock into a buffer
* @block: Number of the physical eraseblock
* @offset: Data offset from the start of @peb
* @len: Data size to read
* @dst: Address of the destination buffer
*
* Notes:
* @offset + @len are not allowed to be larger than a physical
* erase block. No sanity check done for simplicity reasons.
*/
int onenand_spl_read_block(int block, int offset, int len, void *dst)
{
int page, read;
static int psize;
if (!psize)
psize = onenand_spl_get_geometry();
/* Calculate the page number */
page = offset / psize;
/* Offset to the start of a flash page */
offset = offset % psize;
while (len) {
/*
* Non page aligned reads go to the scratch buffer.
* Page aligned reads go directly to the destination.
*/
if (offset || len < psize) {
onenand_spl_read_page(block, page,
(uint32_t *)scratch_buf, psize);
read = min(len, psize - offset);
memcpy(dst, scratch_buf + offset, read);
offset = 0;
} else {
onenand_spl_read_page(block, page, dst, psize);
read = psize;
}
page++;
len -= read;
dst += read;
}
return 0;
}
#endif
void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst)
{
uint32_t *addr = (uint32_t *)dst;
uint32_t to_page;
uint32_t block;
uint32_t page, rpage;
enum onenand_spl_pagesize pagesize;
int ret;
pagesize = onenand_spl_get_geometry();
/*
* The page can be either 2k or 4k, avoid using DIV_ROUND_UP to avoid
* pulling further unwanted functions into the SPL.
*/
if (pagesize == 2048) {
page = offs / 2048;
to_page = page + DIV_ROUND_UP(size, 2048);
} else {
page = offs / 4096;
to_page = page + DIV_ROUND_UP(size, 4096);
}
for (; page <= to_page; page++) {
block = page / ONENAND_PAGES_PER_BLOCK;
rpage = page & (ONENAND_PAGES_PER_BLOCK - 1);
ret = onenand_spl_read_page(block, rpage, addr, pagesize);
if (ret)
page += ONENAND_PAGES_PER_BLOCK - 1;
else
addr += pagesize / 4;
}
}