mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
211 lines
7.5 KiB
ReStructuredText
211 lines
7.5 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0+
|
||
|
.. Copyright (C) 2020, Linaro Limited
|
||
|
|
||
|
Enabling UEFI Capsule Update feature
|
||
|
------------------------------------
|
||
|
|
||
|
Support has been added for the UEFI capsule update feature which
|
||
|
enables updating the U-Boot image using the UEFI firmware management
|
||
|
protocol (fmp). The capsules are not passed to the firmware through
|
||
|
the UpdateCapsule runtime service. Instead, capsule-on-disk
|
||
|
functionality is used for fetching the capsule from the EFI System
|
||
|
Partition (ESP) by placing the capsule file under the
|
||
|
\EFI\UpdateCapsule directory.
|
||
|
|
||
|
Currently, support has been added on the QEMU ARM64 virt platform for
|
||
|
updating the U-Boot binary as a raw image when the platform is booted
|
||
|
in non-secure mode, i.e. with CONFIG_TFABOOT disabled. For this
|
||
|
configuration, the QEMU platform needs to be booted with
|
||
|
'secure=off'. The U-Boot binary placed on the first bank of the NOR
|
||
|
flash at offset 0x0. The U-Boot environment is placed on the second
|
||
|
NOR flash bank at offset 0x4000000.
|
||
|
|
||
|
The capsule update feature is enabled with the following configuration
|
||
|
settings::
|
||
|
|
||
|
CONFIG_MTD=y
|
||
|
CONFIG_FLASH_CFI_MTD=y
|
||
|
CONFIG_CMD_MTDPARTS=y
|
||
|
CONFIG_CMD_DFU=y
|
||
|
CONFIG_DFU_MTD=y
|
||
|
CONFIG_PCI_INIT_R=y
|
||
|
CONFIG_EFI_CAPSULE_ON_DISK=y
|
||
|
CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
|
||
|
CONFIG_EFI_CAPSULE_FIRMWARE=y
|
||
|
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|
||
|
CONFIG_EFI_CAPSULE_FMP_HEADER=y
|
||
|
|
||
|
In addition, the following config needs to be disabled(QEMU ARM specific)::
|
||
|
|
||
|
CONFIG_TFABOOT
|
||
|
|
||
|
The capsule file can be generated by using the GenerateCapsule.py
|
||
|
script in EDKII::
|
||
|
|
||
|
$ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
|
||
|
<capsule_file_name> --fw-version <val> --lsv <val> --guid \
|
||
|
e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose --update-image-index \
|
||
|
<val> --verbose <u-boot.bin>
|
||
|
|
||
|
The above is a wrapper script(GenerateCapsule) which eventually calls
|
||
|
the actual GenerateCapsule.py script.
|
||
|
|
||
|
As per the UEFI specification, the capsule file needs to be placed on
|
||
|
the EFI System Partition, under the \EFI\UpdateCapsule directory. The
|
||
|
EFI System Partition can be a virtio-blk-device.
|
||
|
|
||
|
Before initiating the firmware update, the efi variables BootNext,
|
||
|
BootXXXX and OsIndications need to be set. The BootXXXX variable needs
|
||
|
to be pointing to the EFI System Partition which contains the capsule
|
||
|
file. The BootNext, BootXXXX and OsIndications variables can be set
|
||
|
using the following commands::
|
||
|
|
||
|
=> efidebug boot add 0 Boot0000 virtio 0:1 <capsule_file_name>
|
||
|
=> efidebug boot next 0
|
||
|
=> setenv -e -nv -bs -rt -v OsIndications =0x04
|
||
|
=> saveenv
|
||
|
|
||
|
Finally, the capsule update can be initiated with the following
|
||
|
command::
|
||
|
|
||
|
=> efidebug capsule disk-update
|
||
|
|
||
|
The updated U-Boot image will be booted on subsequent boot.
|
||
|
|
||
|
Enabling Capsule Authentication
|
||
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||
|
|
||
|
The UEFI specification defines a way of authenticating the capsule to
|
||
|
be updated by verifying the capsule signature. The capsule signature
|
||
|
is computed and prepended to the capsule payload at the time of
|
||
|
capsule generation. This signature is then verified by using the
|
||
|
public key stored as part of the X509 certificate. This certificate is
|
||
|
in the form of an efi signature list (esl) file, which is embedded as
|
||
|
part of the platform's device tree blob using the mkeficapsule
|
||
|
utility.
|
||
|
|
||
|
On the QEMU virt platforms, the device-tree is generated on the fly
|
||
|
based on the devices configured. This device tree is then passed on to
|
||
|
the various software components booting on the platform, including
|
||
|
U-Boot. Therefore, on the QEMU virt platform, the signatute is
|
||
|
embedded on an overlay. This overlay is then applied at runtime to the
|
||
|
base platform device-tree. Steps needed for embedding the esl file in
|
||
|
the overlay are highlighted below.
|
||
|
|
||
|
The capsule authentication feature can be enabled through the
|
||
|
following config, in addition to the configs listed above for capsule
|
||
|
update::
|
||
|
|
||
|
CONFIG_EFI_CAPSULE_AUTHENTICATE=y
|
||
|
|
||
|
The public and private keys used for the signing process are generated
|
||
|
and used by the steps highlighted below::
|
||
|
|
||
|
1. Install utility commands on your host
|
||
|
* OPENSSL
|
||
|
* efitools
|
||
|
|
||
|
2. Create signing keys and certificate files on your host
|
||
|
|
||
|
$ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=CRT/ \
|
||
|
-keyout CRT.key -out CRT.crt -nodes -days 365
|
||
|
$ cert-to-efi-sig-list CRT.crt CRT.esl
|
||
|
|
||
|
$ openssl x509 -in CRT.crt -out CRT.cer -outform DER
|
||
|
$ openssl x509 -inform DER -in CRT.cer -outform PEM -out CRT.pub.pem
|
||
|
|
||
|
$ openssl pkcs12 -export -out CRT.pfx -inkey CRT.key -in CRT.crt
|
||
|
$ openssl pkcs12 -in CRT.pfx -nodes -out CRT.pem
|
||
|
|
||
|
The capsule file can be generated by using the GenerateCapsule.py
|
||
|
script in EDKII::
|
||
|
|
||
|
$ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
|
||
|
<capsule_file_name> --monotonic-count <val> --fw-version \
|
||
|
<val> --lsv <val> --guid \
|
||
|
e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose \
|
||
|
--update-image-index <val> --signer-private-cert \
|
||
|
/path/to/CRT.pem --trusted-public-cert \
|
||
|
/path/to/CRT.pub.pem --other-public-cert /path/to/CRT.pub.pem \
|
||
|
<u-boot.bin>
|
||
|
|
||
|
Place the capsule generated in the above step on the EFI System
|
||
|
Partition under the EFI/UpdateCapsule directory
|
||
|
|
||
|
For embedding the public key certificate, the following steps need to
|
||
|
be followed::
|
||
|
|
||
|
1. Generate a skeleton overlay dts file, with a single fragment
|
||
|
node and an empty __overlay__ node
|
||
|
|
||
|
A typical skeleton overlay file will look like this
|
||
|
|
||
|
/dts-v1/;
|
||
|
/plugin/;
|
||
|
|
||
|
/ {
|
||
|
fragment@0 {
|
||
|
target-path = "/";
|
||
|
__overlay__ {
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
|
||
|
2. Convert the dts to a corresponding dtb with the following
|
||
|
command
|
||
|
./scripts/dtc/dtc -@ -I dts -O dtb -o <ov_dtb_file_name> \
|
||
|
<dts_file>
|
||
|
|
||
|
3. Run the dtb file generated above through the mkeficapsule tool
|
||
|
in U-Boot
|
||
|
./tools/mkeficapsule -O <pub_key.esl> -D <ov_dtb>
|
||
|
|
||
|
Running the above command results in the creation of a 'signature'
|
||
|
node in the dtb, under which the public key is stored as a
|
||
|
'capsule-key' property. The '-O' option is to be used since the
|
||
|
public key certificate(esl) file is being embedded in an overlay.
|
||
|
|
||
|
The dtb file embedded with the certificate is now to be placed on an
|
||
|
EFI System Partition. This would then be loaded and "merged" with the
|
||
|
base platform flattened device-tree(dtb) at runtime.
|
||
|
|
||
|
Build U-Boot with the following steps(QEMU ARM64)::
|
||
|
|
||
|
$ make qemu_arm64_defconfig
|
||
|
$ make menuconfig
|
||
|
Disable CONFIG_TFABOOT
|
||
|
Enable CONFIG_EFI_CAPSULE_AUTHENTICATE
|
||
|
Enable all configs needed for capsule update(listed above)
|
||
|
$ make all
|
||
|
|
||
|
Boot the platform and perform the following steps on the U-Boot
|
||
|
command line::
|
||
|
|
||
|
1. Enable capsule authentication by setting the following env
|
||
|
variable
|
||
|
|
||
|
=> setenv capsule_authentication_enabled 1
|
||
|
=> saveenv
|
||
|
|
||
|
2. Load the overlay dtb to memory and merge it with the base fdt
|
||
|
|
||
|
=> fatload virtio 0:1 <$fdtovaddr> EFI/<ov_dtb_file>
|
||
|
=> fdt addr $fdtcontroladdr
|
||
|
=> fdt resize <size_of_ov_dtb_file>
|
||
|
=> fdt apply <$fdtovaddr>
|
||
|
|
||
|
3. Set the following environment and UEFI boot variables
|
||
|
|
||
|
=> setenv -e -nv -bs -rt -v OsIndications =0x04
|
||
|
=> efidebug boot add 0 Boot0000 virtio 0:1 <capsule_file_name>
|
||
|
=> efidebug boot next 0
|
||
|
=> saveenv
|
||
|
|
||
|
4. Finally, the capsule update can be initiated with the following
|
||
|
command
|
||
|
|
||
|
=> efidebug capsule disk-update
|
||
|
|
||
|
On subsequent reboot, the platform should boot the updated U-Boot binary.
|