Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 07:13:03 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/sandbox_flattree_defconfig

231 lines
5 KiB
Text
Raw Normal View History

Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 12:16:24 +00:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_ENV_SIZE=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_BOOTSTAGE_STASH_ADDR=0x0
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0x0
configs: sandbox: activate DEBUG_UART Add CONFIG_DEBUG_UART=y for all sandbox defconfig as it is already done in sandbox_defconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-27 10:49:29 +00:00
CONFIG_DEBUG_UART=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 14:33:18 +00:00
CONFIG_SYS_MEMTEST_START=0x00100000
CONFIG_SYS_MEMTEST_END=0x00101000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_DISTRO_DEFAULTS=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
sandbox: Enable mmc command and legacy images The mmc command is useful for testing mmc disk images in sandbox, so enable it. We also need to enable legacy images so that we can run tests which use them. Disable it for a few avb tests since MMC is not implemented there yet. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-06 14:52:19 +00:00
CONFIG_LEGACY_IMAGE_FORMAT=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
bootstd: Add tests for bootstd including all uclasses Add a set of combined tests for the bootdev, bootflow and bootmeth commands, along with associated functionality. Expand the sandbox console-recording limit so that these can work. These tests rely on a filesystem script which is not yet added to the Python tests. It is included here as a shell script. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:24 +00:00
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:17 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_BOOTZ=y
sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG 'bootefi hello' is used in one of the Python tests. efidebug can be used to verify the correct initialization of the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2020-03-14 11:27:02 +00:00
CONFIG_CMD_BOOTEFI_HELLO=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
# CONFIG_CMD_ELF is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
test: sandbox: add test for erase command Add test for the erase command tested on ENV in EXT4. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 09:51:27 +00:00
CONFIG_CMD_ERASEENV=y
test: capsule: Modify the capsule tests to use GUID values for sandbox The current UEFI capsule updation code uses two GUID values, one for FIT images, and one for raw images across platforms. This logic is being changed to have GUID values per image, per platform. Change the tests for the capsule update code to reflect this change. The GUID values now used are the ones specific to the sandbox platform -- one for the u-boot image, and another for the u-boot environment image. Install the FMP instance for raw images on the sandbox variant for testing the capsule update code. Install the FMP instance for the FIT images on the sandbox64 and sandbox_flattree variant for testing capsule update for FIT images. This is being done by splitting the capsule update script for FIT and raw images. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-15 05:59:38 +00:00
CONFIG_CMD_NVEDIT_EFI=y
configs: sandbox: Enable sub command 'env info' Enable support for sub command 'env info' in sandbox with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily at adding unit test. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-19 12:03:36 +00:00
CONFIG_CMD_NVEDIT_INFO=y
configs: sandbox: activate command env select and env load Add support of environment location with the new env command: 'env select' and 'env load' The ENV backend is selected by priority order - 0 = "nowhere" (default at boot) - 1 = "EXT4" To test EXT4 env support, this backend is selected by name: > env select EXT4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 09:51:23 +00:00
CONFIG_CMD_NVEDIT_LOAD=y
CONFIG_CMD_NVEDIT_SELECT=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_LOOPW=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_MX_CYCLIC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28 18:28:38 +00:00
CONFIG_CMD_MEMTEST=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_DEMO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_GPIO=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_GPT=y
bootstd: Add an IDE bootdev Add a bootdev for IDE so that these devices can be used with standard boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-17 17:47:46 +00:00
CONFIG_CMD_IDE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_I2C=y
sandbox: Enable mmc command and legacy images The mmc command is useful for testing mmc disk images in sandbox, so enable it. We also need to enable legacy images so that we can run tests which use them. Disable it for a few avb tests since MMC is not implemented there yet. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-06 14:52:19 +00:00
CONFIG_CMD_MMC=y
video_osd: Add osd sandbox driver and tests Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-27 07:19:31 +00:00
CONFIG_CMD_OSD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_PCI=y
CONFIG_CMD_REMOTEPROC=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_SPI=y
thermal: add sandbox driver Provide a simple sandbox driver for the thermal uclass. It simply registers and returns 100 degrees C if requested. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-06 11:30:35 +00:00
CONFIG_CMD_TEMPERATURE=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_USB=y
Convert CONFIG_BOOTP_DNS2 to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-16 23:06:17 +00:00
CONFIG_BOOTP_DNS2=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TFTPSRV=y
CONFIG_CMD_RARP=y
CONFIG_CMD_CDP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DNS=y
CONFIG_CMD_LINK_LOCAL=y
sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG 'bootefi hello' is used in one of the Python tests. efidebug can be used to verify the correct initialization of the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2020-03-14 11:27:02 +00:00
CONFIG_CMD_EFIDEBUG=y
sandbox: add rtc command to defconfigs In order to allow adding unit tests of the rtc command, add it to the various sandbox defconfigs. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-07-06 20:01:19 +00:00
CONFIG_CMD_RTC=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_SOUND=y
CONFIG_CMD_QFW=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_TPM=y
CONFIG_CMD_TPM_TEST=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MAC_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_OF_CONTROL=y
configs: sandbox: activate env in ext4 support Activate ENV in EXT4 support in sandbox. The sandbox behavior don't change; the default environment with the nowhere backend (CONFIG_ENV_IS_NOWHERE)is still used: the weak function env_get_location() return ENVL_NOWHERE for priority 0. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 09:51:22 +00:00
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_EXT4=y
CONFIG_ENV_EXT4_INTERFACE="host"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:0"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_BOOTP_SEND_HOSTNAME=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_NETCONSOLE=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:14 +00:00
CONFIG_IP_DEFRAG=y
Convert CONFIG_BOOTP_SERVERIP to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_SERVERIP Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-18 18:27:51 +00:00
CONFIG_BOOTP_SERVERIP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-29 18:44:21 +00:00
CONFIG_IPV6=y
dm: test: Add test case for dev->dma_offset Add test to validate dev->dma_offset is properly set on devices. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-01-12 12:55:25 +00:00
CONFIG_DM_DMA=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_DEVRES=y
CONFIG_DEBUG_DEVRES=y
vbe: Add a test for VBE device tree fixups When a FIT includes some OS requests, U-Boot should process these and add the requested info to corresponding subnodes of the /chosen node. Add a pytest for this, which sets up the FIT, runs bootm and then uses a C unit test to check that everything looks OK. The test needs to run on sandbox_flattree since we don't support device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and disable bootflow_system(), since EFI is not supported on sandbox_flattree. Add a link to the initial documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-11 15:47:20 +00:00
CONFIG_OFNODE_MULTI_TREE=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
sandbox: Add PCI driver and test for p2sb Add a sandbox driver and PCI-device emulator for p2sb. Also add a test which uses a simple 'adder' driver to test the p2sb functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:41:57 +00:00
CONFIG_AXI=y
CONFIG_AXI_SANDBOX=y
bootstd: Add an IDE bootdev Add a bootdev for IDE so that these devices can be used with standard boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-17 17:47:46 +00:00
CONFIG_SYS_IDE_MAXBUS=1
CONFIG_SYS_ATA_BASE_ADDR=0x100
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0
CONFIG_SYS_ATA_REG_OFFSET=1
CONFIG_SYS_ATA_ALT_OFFSET=2
CONFIG_SYS_ATA_IDE0_OFFSET=0
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CLK=y
configs: sandbox: Enable composite clk Enable composite clk for sandbox test Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31 07:02:00 +00:00
CONFIG_CLK_COMPOSITE_CCF=y
test: Add K210 PLL tests to sandbox defconfigs This adds the unit test for the K210 PLL to the sandbox defconfigs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-11 04:16:17 +00:00
CONFIG_CLK_K210=y
CONFIG_CLK_K210_SET_RATE=y
defconfig: sandbox: Enable SANDBOX_CLK_CCF to reuse generic CCF code Enable by default the Common Clock Framework [CCF] clock code for sandbox. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-06-24 13:50:51 +00:00
CONFIG_SANDBOX_CLK_CCF=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CPU=y
CONFIG_DM_DEMO=y
CONFIG_DM_DEMO_SIMPLE=y
CONFIG_DM_DEMO_SHAPE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-20 18:48:59 +00:00
CONFIG_DFU_SF=y
sandbox, test: add test for GPIO_HOG function currently gpio hog function is not tested with "ut dm gpio" so add some basic tests for gpio hog functionality. For this enable GPIO_HOG in sandbox_defconfig, add in DTS some gpio hog entries, and add testcase in "ut dm gpio" command. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 09:08:58 +00:00
CONFIG_GPIO_HOG=y
gpio: fix test.py for gpio label lookup commit 2bd261dd1712 ("gpio: search for gpio label if gpio is not found through bank name") disabled DM_GPIO_LOOKUP_LABEL which is needed in sandbox defconfigs, as we have tests for this functionality. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-07-08 08:24:00 +00:00
CONFIG_DM_GPIO_LOOKUP_LABEL=y
pmic: Convert pm8916 driver to a generic Qcom PMIC driver Since both pm8916.c and pm8916_gpio.c are already supporting multiple Qcom SoCs, it makes sense to rename these drivers to pmic_qcom.c and qcom_pmic_gpio.c respectively. Also, these driver can be extended to support additional functionality if required for other Qcom SoCs. Along with this import latest DT binding: qcom,spmi-pmic.txt from Linux kernel and thereby remove pm8916.txt. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-04 14:27:17 +00:00
CONFIG_QCOM_PMIC_GPIO=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_SANDBOX_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
CONFIG_SYS_I2C_SANDBOX=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
CONFIG_I8042_KEYB=y
test: Add tests for IOMMU uclass Add a set of tests for the IOMMU uclass. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-23 14:58:02 +00:00
CONFIG_IOMMU=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
CONFIG_MISC=y
sandbox: Enable NVMEM This enables NVMEM for all sandbox defconfigs, enabling it to be used in unit tests in the next few commits. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-05-05 17:11:40 +00:00
CONFIG_NVMEM=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_SANDBOX=y
CONFIG_CROS_EC_SPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_P2SB=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_PWRSEQ=y
CONFIG_I2C_EEPROM=y
CONFIG_MMC_SANDBOX=y
CONFIG_SPI_FLASH_SANDBOX=y
bootstd: Add a SPI flash bootdev Add a bootdev for SPI flash so that these devices can be used with standard boot. It only supports loading a script. Add a special case for the label, since we want to use "spi", not "spi_flash". Enable the new bootdev on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-17 17:48:03 +00:00
CONFIG_BOOTDEV_SPI_FLASH=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
nvme: Split out PCI support Apple SoCs have an integrated NVMe controller that isn't connected over a PCIe bus. In preparation for adding support for this NVMe controller, split out the PCI support into its own file. This file is selected through a new CONFIG_NVME_PCI Kconfig option, so do a wholesale replacement of CONFIG_NVME with CONFIG_NVME_PCI. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-01-22 19:38:11 +00:00
CONFIG_NVME_PCI=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_PCI=y
pci: pci-uclass: Add multi entry support for memory regions Enable PCI memory regions in ranges property to be of multiple entry. This helps to add support for SoC's like OcteonTX/TX2 where every peripheral is on PCI bus. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2019-10-20 00:10:20 +00:00
CONFIG_PCI_REGION_MULTI_ENTRY=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_PCI_SANDBOX=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 13:47:40 +00:00
CONFIG_PHY=y
CONFIG_PHY_SANDBOX=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_SANDBOX=y
test: pinmux: add test for 'pinctrl-single' driver The test adds two pinmux nodes to the device tree, one to test when a register changes only one pin's mux (pinctrl-single,pins), and the other to test when more than one pin's mux is changed (pinctrl-single,bits). This required replacing the controller's register access functions when the driver is used on sandbox. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-11 07:39:50 +00:00
CONFIG_PINCTRL_SINGLE=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_POWER_DOMAIN=y
CONFIG_SANDBOX_POWER_DOMAIN=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_ACT8846=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_PMIC_MAX77686=y
sandbox: Enable MC34708 PMIC support This MC34708 PMIC is somewhat special - it used single transfers (R/W) with 3 bytes size - up till now U-Boot's PMICs only used 1 byte. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-15 14:26:41 +00:00
CONFIG_DM_PMIC_MC34708=y
pmic: Convert pm8916 driver to a generic Qcom PMIC driver Since both pm8916.c and pm8916_gpio.c are already supporting multiple Qcom SoCs, it makes sense to rename these drivers to pmic_qcom.c and qcom_pmic_gpio.c respectively. Also, these driver can be extended to support additional functionality if required for other Qcom SoCs. Along with this import latest DT binding: qcom,spmi-pmic.txt from Linux kernel and thereby remove pm8916.txt. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-04 14:27:17 +00:00
CONFIG_PMIC_QCOM=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_PMIC_S2MPS11=y
CONFIG_DM_PMIC_SANDBOX=y
CONFIG_PMIC_S5M8767=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_REGULATOR_TPS65090=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 13:47:40 +00:00
CONFIG_DM_PWM=y
sandbox: cros-ec: Add tests for the Chromium OS EC PWM driver This patch adds a limited pulse-width modulator to sandbox's Chromium OS Embedded Controller emulation. The emulated PWM device supports multiple channels but can only set a duty cycle for each, as the actual EC doesn't expose any functionality or information other than that. Though the EC supports specifying the PWM channel by its type (e.g. display backlight, keyboard backlight), this is not implemented in the emulation as nothing in U-Boot uses this type specification. This emulated PWM device is then used to test the Chromium OS PWM driver in sandbox. Adding the required device node to the sandbox test device-tree unfortunately makes it the first PWM device, so this also touches some other tests to make sure they still use the sandbox PWM. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19 16:33:31 +00:00
CONFIG_PWM_CROS_EC=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 13:47:40 +00:00
CONFIG_PWM_SANDBOX=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_RAM=y
CONFIG_REMOTEPROC_SANDBOX=y
CONFIG_DM_RESET=y
CONFIG_SANDBOX_RESET=y
CONFIG_DM_RTC=y
sandbox: Enable SCSI for all builds This will be needed to run unit tests, once the SCSI code is used for USB as well. Enable it for all sandbox builds. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-21 14:21:44 +00:00
CONFIG_SCSI=y
sandbox: Convert to use driver model for SCSI At present sandbox is producing a warning about SCSI migration. Drop the legacy code and replace it with a new implementation. Also drop the SATA command, which does not work with driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-21 14:21:46 +00:00
CONFIG_DM_SCSI=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_SANDBOX_SERIAL=y
CONFIG_SOUND=y
CONFIG_SOUND_SANDBOX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_SOC_DEVICE=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_SANDBOX_SPI=y
CONFIG_SPMI=y
CONFIG_SPMI_SANDBOX=y
board: Rename uclass to sysinfo This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05 13:32:05 +00:00
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SANDBOX=y
test: Add gpio-sysinfo test This adds a test for the gpio-sysinfo driver. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-20 14:50:58 +00:00
CONFIG_SYSINFO_GPIO=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_SYSRESET=y
thermal: add sandbox driver Provide a simple sandbox driver for the thermal uclass. It simply registers and returns 100 degrees C if requested. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-06 11:30:35 +00:00
CONFIG_DM_THERMAL=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_TIMER=y
CONFIG_TIMER_EARLY=y
CONFIG_SANDBOX_TIMER=y
CONFIG_USB=y
CONFIG_USB_EMUL=y
CONFIG_USB_KEYBOARD=y
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-18 13:46:31 +00:00
CONFIG_VIDEO=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CONSOLE_ROTATION=y
CONFIG_CONSOLE_TRUETYPE=y
CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
Convert CONFIG_I2C_EDID et al to Kconfig This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-08 03:59:43 +00:00
CONFIG_I2C_EDID=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_VIDEO_SANDBOX_SDL=y
video_osd: Add osd sandbox driver and tests Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-27 07:19:31 +00:00
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
video: Add a test for 16bpp BMP files Add a compressed 16bpp BMP file and a test to cover this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-19 20:23:58 +00:00
CONFIG_BMP_16BPP=y
video: theadorable: Use RGB565 for BMP blitting At present this uses RGB555 format for blitting to a display. Sandbox uses 565 and that seems to be more normal for BMP as well. Update the code accordingly and add a test. Note that this likely breaks the theadorable board so we may need to discuss supporting both formats. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-19 20:23:59 +00:00
CONFIG_BMP_24BPP=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_CMD_DHRYSTONE=y
test: enable RSA library test on sandbox We want to always run RSA library test on sandbox build in Travis CI. Just adding CONFIG_RSA_VERIFY_WITH_PKEY would be good enough for this purpose. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-02-21 06:13:01 +00:00
CONFIG_RSA_VERIFY_WITH_PKEY=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_TPM=y
CONFIG_LZ4=y
test: compression: add zstd uncompression test Signed-off-by: Brandon Maier <brandon.maier@collins.com>
2023-01-12 16:27:46 +00:00
CONFIG_ZSTD=y
sandbox: Add a new sandbox_flattree board Add a sandbox board to test the non-livetree build (i.e. with CONFIG_OF_FLAT disabled). This increases our build and test coverage. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:24 +00:00
CONFIG_ERRNO_STR=y
bootstd: Check building without global bootmeths Use the sandbox_flattree build to check that everything works correctly with BOOTMETH_GLOBAL disabled. Update the tests as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-30 21:52:36 +00:00
# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
test: capsule: Modify the capsule tests to use GUID values for sandbox The current UEFI capsule updation code uses two GUID values, one for FIT images, and one for raw images across platforms. This logic is being changed to have GUID values per image, per platform. Change the tests for the capsule update code to reflect this change. The GUID values now used are the ones specific to the sandbox platform -- one for the u-boot image, and another for the u-boot environment image. Install the FMP instance for raw images on the sandbox variant for testing the capsule update code. Install the FMP instance for the FIT images on the sandbox64 and sandbox_flattree variant for testing capsule update for FIT images. This is being done by splitting the capsule update script for FIT and raw images. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-15 05:59:38 +00:00
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
CONFIG_EFI_CAPSULE_ON_DISK=y
CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-20 18:48:59 +00:00
CONFIG_UNIT_TEST=y
CONFIG_UT_TIME=y
CONFIG_UT_DM=y
Reference in a new issue Copy permalink