Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 13:14:27 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/dwc3/Makefile

15 lines
451 B
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 01:06:16 +00:00
usb: dwc3: add dwc3 folder from linux kernel to u-boot Added dwc3 folder from linux kernel 3.19-rc1 (97bf6af1f9) to u-boot. This will be adapted to work with u-boot in the following patches. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-23 13:09:50 +00:00
obj-$(CONFIG_USB_DWC3) += dwc3.o
usb: dwc3: Makefile: Make dwc3 driver compile in u-boot Now that the entire dwc3 driver is adapted to compile with uboot build, modify the Makefiles so that the dwc3 driver can be built. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-23 13:10:16 +00:00
dwc3-y := core.o
usb: dwc3: add dwc3 folder from linux kernel to u-boot Added dwc3 folder from linux kernel 3.19-rc1 (97bf6af1f9) to u-boot. This will be adapted to work with u-boot in the following patches. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-23 13:09:50 +00:00
usb: dwc3: Makefile: Don't build gadget code if USB_GADGET is disabled It is pointless to build gadget driver if USB_GADGET is disabled. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de>
2016-05-13 12:17:52 +00:00
obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
usb: dwc3: add dwc3 folder from linux kernel to u-boot Added dwc3 folder from linux kernel 3.19-rc1 (97bf6af1f9) to u-boot. This will be adapted to work with u-boot in the following patches. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-23 13:09:50 +00:00
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
usb: dwc3: Add Meson G12A USB Glue Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-02-19 12:42:01 +00:00
obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
obj-$(CONFIG_USB_DWC3_GENERIC) += dwc3-generic.o
usb: dwc3: add UniPhier specific glue layer Add UniPhier platform specific glue layer to support USB3 Host mode on Synopsys DWC3 IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-09-28 13:01:00 +00:00
obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
usb: dwc3: Makefile: Make dwc3 driver compile in u-boot Now that the entire dwc3 driver is adapted to compile with uboot build, modify the Makefiles so that the dwc3 driver can be built. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-23 13:10:16 +00:00
obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
samsung: usb: phy: Support for DWC3 PHY New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have been added to u-boot to provide proper PHY handling at Exynos5 SoCs. This code is used thereafter in the board_usb_init() call. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
2015-05-22 16:14:23 +00:00
obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o
Reference in a new issue Copy permalink