mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
142 lines
7.1 KiB
Text
142 lines
7.1 KiB
Text
|
Introduction:
|
||
|
|
-------------
|
||
|
|
The AM65x family of SoCs is the first device family from K3 Multicore
|
||
|
|
SoC architecture, targeted for broad market and industrial control with
|
||
|
|
aim to meet the complex processing needs of modern embedded products.
|
||
|
|
|
||
|
|
The device is built over three domains, each containing specific processing
|
||
|
|
cores, voltage domains and peripherals:
|
||
|
|
1. Wake-up (WKUP) domain:
|
||
|
|
- Device Management and Security Controller (DMSC)
|
||
|
|
2. Microcontroller (MCU) domain:
|
||
|
|
- Dual Core ARM Cortex-R5F processor
|
||
|
|
3. MAIN domain:
|
||
|
|
- Quad core 64-bit ARM Cortex-A53
|
||
|
|
|
||
|
|
More info can be found in TRM: http://www.ti.com/lit/pdf/spruid7
|
||
|
|
|
||
|
|
Boot Flow:
|
||
|
|
----------
|
||
|
|
On AM65x family devices, ROM supports boot only via MCU(R5). This means that
|
||
|
|
bootloader has to run on R5 core. In order to meet this constraint, and for
|
||
|
|
the following reasons the boot flow is designed as mentioned:
|
||
|
|
1. Need to move away from R5 asap, so that we want to start *any*
|
||
|
|
firmware on the r5 cores like.... autosar can be loaded to receive CAN
|
||
|
|
response and other safety operations to be started. This operation is
|
||
|
|
very time critical and is applicable for all automotive use cases.
|
||
|
|
2. U-Boot on A53 should start other remotecores for various
|
||
|
|
applications. This should happen before running Linux.
|
||
|
|
3. In production boot flow, we might not like to use full u-boot,
|
||
|
|
instead use Flacon boot flow to reduce boot time.
|
||
|
|
|
||
|
|
+------------------------------------------------------------------------+
|
||
|
|
| DMSC | R5 | A53 |
|
||
|
|
+------------------------------------------------------------------------+
|
||
|
|
| +--------+ | | |
|
||
|
|
| | Reset | | | |
|
||
|
|
| +--------+ | | |
|
||
|
|
| : | | |
|
||
|
|
| +--------+ | +-----------+ | |
|
||
|
|
| | *rom* |----------|-->| Reset rls | | |
|
||
|
|
| +--------+ | +-----------+ | |
|
||
|
|
| | | | : | |
|
||
|
|
| | rom | | : | |
|
||
|
|
| |services| | : | |
|
||
|
|
| | | | +-------------+ | |
|
||
|
|
| | | | | *R5 rom* | | |
|
||
|
|
| | | | +-------------+ | |
|
||
|
|
| | |<---------|---|Load and auth| | |
|
||
|
|
| | | | | tiboot3.bin | | |
|
||
|
|
| | | | +-------------+ | |
|
||
|
|
| | | | : | |
|
||
|
|
| | | | : | |
|
||
|
|
| | | | : | |
|
||
|
|
| | | | +-------------+ | |
|
||
|
|
| | Start | | | *R5 SPL* | | |
|
||
|
|
| | System | | +-------------+ | |
|
||
|
|
| |Firmware|<---------|---|Load and auth| | |
|
||
|
|
| +--------+ | | sysfw bin | | |
|
||
|
|
| : | +-------------+ | |
|
||
|
|
| +---------+ | | DDR | | |
|
||
|
|
| | *SYSFW* | | | config | | |
|
||
|
|
| +---------+ | +-------------+ | |
|
||
|
|
| | |<--------|---| Load | | |
|
||
|
|
| | | | | tispl.bin | | |
|
||
|
|
| | | | +-------------+ | |
|
||
|
|
| | |<--------|---| Start A53 | | |
|
||
|
|
| | | | | and Reset | | |
|
||
|
|
| | | | +-------------+ | |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | |---------|-----------------------|---->| Reset rls | |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | DMSC | | | : |
|
||
|
|
| |Services | | | +-----------+ |
|
||
|
|
| | |<--------|-----------------------|---->|*ATF/OPTEE*| |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | | | | : |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | |<--------|-----------------------|---->| *A53 SPL* | |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | | | | | Load | |
|
||
|
|
| | | | | | u-boot.img| |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | | | | : |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | |<--------|-----------------------|---->| *u-boot* | |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| | | | | | prompt | |
|
||
|
|
| | | | | +-----------+ |
|
||
|
|
| +---------+ | | |
|
||
|
|
| | | |
|
||
|
|
+------------------------------------------------------------------------+
|
||
|
|
|
||
|
|
- Here DMSC acts as master and provides all the critical services. R5/A53
|
||
|
|
requests DMSC to get these services done as shown in the above diagram.
|
||
|
|
|
||
|
|
Sources:
|
||
|
|
--------
|
||
|
|
1. SYSFW:
|
||
|
|
System Firmware repo is closed source and the binaries are delivered
|
||
|
|
to users with NDA. Please contact TI to get the System Firmware
|
||
|
|
Binary named ti-sci-firmware-am6x.bin that runs on AM65x SoC.
|
||
|
|
|
||
|
|
2. ATF:
|
||
|
|
Tree: https://github.com/ARM-software/arm-trusted-firmware.git
|
||
|
|
Branch: master
|
||
|
|
|
||
|
|
3. OPTEE:
|
||
|
|
Tree: https://github.com/OP-TEE/optee_os.git
|
||
|
|
Branch: master
|
||
|
|
|
||
|
|
4. U-Boot:
|
||
|
|
Tree: http://git.denx.de/u-boot.git
|
||
|
|
Branch: master
|
||
|
|
|
||
|
|
Build procedure:
|
||
|
|
----------------
|
||
|
|
1. SYSFW:
|
||
|
|
ROM expects a signed binary that contains the X509 certificate. So
|
||
|
|
the binary ti-sci-firmware-am6x.bin cannot be uses as-is and needs to be signed.
|
||
|
|
Contact TI on the procedure to sign the system firmware binary.
|
||
|
|
|
||
|
|
2. ATF:
|
||
|
|
$ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
|
||
|
|
|
||
|
|
3. OPTEE:
|
||
|
|
$ make PLATFORM=k3-am65x CFG_ARM64_core=y
|
||
|
|
|
||
|
|
4. U-Boot:
|
||
|
|
|
||
|
|
4.1. R5:
|
||
|
|
TBD.
|
||
|
|
|
||
|
|
4.2. A53:
|
||
|
|
$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53
|
||
|
|
$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a53
|
||
|
|
|
||
|
|
Target Images
|
||
|
|
--------------
|
||
|
|
Copy the below images to an SD card and boot:
|
||
|
|
- tiboot3.bin from step 4.1
|
||
|
|
- tispl.bin, u-boot.img from 4.2
|