Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-01 08:59:33 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/env/Kconfig

943 lines
31 KiB
Text
Raw Normal View History

Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
menu "Environment"
env: another attempt at fixing SPL build failures I'm also seeing the build failure that commit 7d4776545b env: solve compilation error in SPL tried to fix, namely that the reference to env_flags_validate from env_htab cannot be satisfied when flags.o is not built in. However, that commit got reverted by d90fc9c3de Revert "env: solve compilation error in SPL" Necessary, but not sufficient conditions to see this are CONFIG_SPL=y (obviously) CONFIG_SPL_ENV_SUPPORT=n (so flags.o does not get compiled) CONFIG_SPL_LIBCOMMON_SUPPORT=y (so env/built-in.o is part of the SPL link) Now, these are satisfied for e.g. imx6q_logic_defconfig. But that builds just fine, and spl/u-boot-spl.map lists .data.env_htab among the discarded (garbage collected) sections. Yet, on our mpc8309-derived board, we do see the build failure, so perhaps the linker works a bit differently on ppc than on ARM, or there's yet some other configuration option needed to observe the break. This is another attempt at solving it, which also cleans up env/Makefile a bit: Introduce a def_bool y symbol CONFIG_ENV_SUPPORT which complements CONFIG_(SPL/TPL)_SUPPORT. Then use CONFIG_$(SPL_TPL_)ENV_SUPPORT to decide whether to include the five basic env/*.o files. For attr.o, flags.o and callback.o, this shouldn't change anything. Also, common.o and env.o still get unconditionally built for U-boot proper. But for TPL/SPL, those two are only included if CONFIG_(SPL/TPL)_SUPPORT is set. Having that symbol should also allow simplifying conditionals such as #if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) found in drivers/reset/reset-socfpga.c to just CONFIG_IS_ENABLED(ENV_SUPPORT). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2019-12-15 22:29:39 +00:00
config ENV_SUPPORT
def_bool y
env: Allow U-Boot scripts to be placed in a .env file At present U-Boot environment variables, and thus scripts, are defined by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text to this file and dealing with quoting and newlines is harder than it should be. It would be better if we could just type the script into a text file and have it included by U-Boot. Add a feature that brings in a .env file associated with the board config, if present. To use it, create a file in a board/<vendor> directory, typically called <board>.env and controlled by the CONFIG_ENV_SOURCE_FILE option. The environment variables should be of the form "var=value". Values can extend to multiple lines. See the README under 'Environment Variables:' for more information and an example. In many cases environment variables need access to the U-Boot CONFIG variables to select different options. Enable this so that the environment scripts can be as useful as the ones currently in the board config files. This uses the C preprocessor, means that comments can be included in the environment using /* ... */ Also support += to allow variables to be appended to. This is needed when using the preprocessor. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-10-22 03:08:46 +00:00
config ENV_SOURCE_FILE
string "Environment file to use"
default ""
help
This sets the basename to use to generate the default environment.
This a text file as described in doc/usage/environment.rst
The file must be in the board directory and have a .env extension, so
the resulting filename is typically
board/<vendor>/<board>/<CONFIG_ENV_SOURCE_FILE>.env
If the file is not present, an error is produced.
If this CONFIG is empty, U-Boot uses CONFIG SYS_BOARD as a default, if
the file board/<vendor>/<board>/<SYS_BOARD>.env exists. Otherwise the
environment is assumed to come from the ad-hoc
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-04 15:03:50 +00:00
CFG_EXTRA_ENV_SETTINGS #define
env: Allow U-Boot scripts to be placed in a .env file At present U-Boot environment variables, and thus scripts, are defined by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text to this file and dealing with quoting and newlines is harder than it should be. It would be better if we could just type the script into a text file and have it included by U-Boot. Add a feature that brings in a .env file associated with the board config, if present. To use it, create a file in a board/<vendor> directory, typically called <board>.env and controlled by the CONFIG_ENV_SOURCE_FILE option. The environment variables should be of the form "var=value". Values can extend to multiple lines. See the README under 'Environment Variables:' for more information and an example. In many cases environment variables need access to the U-Boot CONFIG variables to select different options. Enable this so that the environment scripts can be as useful as the ones currently in the board config files. This uses the C preprocessor, means that comments can be included in the environment using /* ... */ Also support += to allow variables to be appended to. This is needed when using the preprocessor. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-10-22 03:08:46 +00:00
env: add SAVEENV as an alias of the CMD_SAVEENV symbol Currently, testing whether to compile in support for saving the environment is a bit awkward when one needs to take SPL_SAVEENV into account, and quite a few storage drivers currently do not honour SPL_SAVEENV. To make it a bit easier to decide whether environment saving should be enabled, introduce SAVEENV as an alias for the CMD_SAVEENV symbol. Then one can simply use CONFIG_IS_ENABLED(SAVEENV) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-02-19 09:47:39 +00:00
config SAVEENV
def_bool y if CMD_SAVEENV
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
config ENV_OVERWRITE
bool "Enable overwriting environment"
help
Use this to permit overriding of certain environmental variables
like Ethernet and Serial
Convert CONFIG_OVERWRITE_ETHADDR_ONCE to Kconfig This converts the following to Kconfig: CONFIG_OVERWRITE_ETHADDR_ONCE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-02 21:42:39 +00:00
config OVERWRITE_ETHADDR_ONCE
bool "Enable overwriting ethaddr environment variables once"
depends on !ENV_OVERWRITE
help
Enable this to allow for the ethaddr environment variables to be
overwritten one time per boot, only. This allows for a default
to be installed in the environment, which can be changed exactly ONCE
by the user.
Convert CONFIG_ENV_MIN_ENTRIES et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_MIN_ENTRIES CONFIG_ENV_MAX_ENTRIES Cc: Michal Simek <michal.simek@amd.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-13 00:01:58 +00:00
config ENV_MIN_ENTRIES
int "Minimum number of entries in the environment hashtable"
default 64
help
Minimum number of entries in the hash table that is used internally
to store the environment settings.
config ENV_MAX_ENTRIES
int "Maximumm number of entries in the environment hashtable"
default 512
help
Maximum number of entries in the hash table that is used internally
to store the environment settings. The default setting is supposed to
be generous and should work in most cases. This setting can be used
to tune behaviour; see lib/hashtable.c for details.
cmd: nvedit: remove error check, handle with Kconfig Avoid error messages when SPL,TPL,VPL build don't have the environment options of the main build. This is needed when defined(CONFIG_ENV_IS_IN_xxx) is changed to CONFIG_IS_ENABLED(ENV_IS_IN_xxx). Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
2023-03-13 21:31:24 +00:00
config ENV_IS_DEFAULT
def_bool y if !ENV_IS_IN_EEPROM && !ENV_IS_IN_EXT4 && \
env: allow ENV_IS_NOWHERE with other storage target Allow U-Boot to get default environment for some boot mode (USB for example), and to select storage location when it is booting from flash device; ENVL_NOWHERE is present in env_locations with other one. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-07 09:24:02 +00:00
!ENV_IS_IN_FAT && !ENV_IS_IN_FLASH && \
!ENV_IS_IN_MMC && !ENV_IS_IN_NAND && \
!ENV_IS_IN_NVRAM && !ENV_IS_IN_ONENAND && \
!ENV_IS_IN_REMOTE && !ENV_IS_IN_SPI_FLASH && \
!ENV_IS_IN_UBI
cmd: nvedit: remove error check, handle with Kconfig Avoid error messages when SPL,TPL,VPL build don't have the environment options of the main build. This is needed when defined(CONFIG_ENV_IS_IN_xxx) is changed to CONFIG_IS_ENABLED(ENV_IS_IN_xxx). Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
2023-03-13 21:31:24 +00:00
select ENV_IS_NOWHERE
config ENV_IS_NOWHERE
bool "Environment is not stored"
env: Convert CONFIG_ENV_IS_IN... to a choice At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:59 +00:00
help
cmd: nvedit: remove error check, handle with Kconfig Avoid error messages when SPL,TPL,VPL build don't have the environment options of the main build. This is needed when defined(CONFIG_ENV_IS_IN_xxx) is changed to CONFIG_IS_ENABLED(ENV_IS_IN_xxx). Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
2023-03-13 21:31:24 +00:00
Define this if you don't care whether or not an environment is stored
u-boot: Fix several typos 's/environemnt/environment/' and 's/Environemnt/Environment/' Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
2018-06-07 14:17:19 +00:00
on a storage medium. In this case the environment will still exist
cmd: nvedit: remove error check, handle with Kconfig Avoid error messages when SPL,TPL,VPL build don't have the environment options of the main build. This is needed when defined(CONFIG_ENV_IS_IN_xxx) is changed to CONFIG_IS_ENABLED(ENV_IS_IN_xxx). Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
2023-03-13 21:31:24 +00:00
while U-Boot is running, but once U-Boot exits it may not be
stored. If no other ENV_IS_IN_ is defined, U-Boot will always start
up with the default environment.
env: Convert CONFIG_ENV_IS_IN... to a choice At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:59 +00:00
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_IS_IN_EEPROM
bool "Environment in EEPROM"
depends on !CHAIN_OF_TRUST
help
Use this if you have an EEPROM or similar serial access
device and a driver for it.
- CONFIG_ENV_OFFSET:
- CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the
environment area within the total memory of your EEPROM.
Note that we consider the length of the address field to
still be one byte because the extra address bits are hidden
in the chip address.
EEPROM which holds the environment, is reached over
a pca9547 i2c mux with address 0x70, channel 3.
config ENV_IS_IN_FAT
bool "Environment is in a FAT filesystem"
depends on !CHAIN_OF_TRUST
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if ARCH_BCM283X
env: sunxi: Enable FAT-based environment support by default Now that we have everything in place to implement the transition scheme, let's enable it by default. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:04 +00:00
default y if ARCH_SUNXI && MMC
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS
env: ENV_IS_IN_FAT improvements Make it select FS_FAT as well, because if it's not selected, enabling ENV_IS_IN_FAT causes a Kconfig warning: warning: (ENV_IS_IN_FAT) selects FAT_WRITE which has unmet direct dependencies (FS_FAT) This also allows dropping some code from config_fallbacks. Also drop the unnecessary help text about having to enable CONFIG_FAT_WRITE - Kconfig automatically handles that. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-05 00:45:19 +00:00
select FS_FAT
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
select FAT_WRITE
help
env: Use tabs in ENV_IS_IN_FAT Tidy up the formatting of this option. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-03 18:21:50 +00:00
Define this if you want to use the FAT file system for the environment.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
env: enable accessing the environment in an EXT4 partition For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 10:33:48 +00:00
config ENV_IS_IN_EXT4
bool "Environment is in a EXT4 filesystem"
depends on !CHAIN_OF_TRUST
env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4 ENV_IS_IN_EXT4 also need to enable FS_EXT4 which is not covered in Kconfig. Kconfig reports this as: WARNING: unmet direct dependencies detected for EXT4_WRITE Depends on [n]: FS_EXT4 [=n] Selected by [y]: - ENV_IS_IN_EXT4 [=y] && !CHAIN_OF_TRUST [=n] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-19 08:44:23 +00:00
select FS_EXT4
env: enable accessing the environment in an EXT4 partition For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 10:33:48 +00:00
select EXT4_WRITE
help
Define this if you want to use the EXT4 file system for the environment.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_IS_IN_FLASH
bool "Environment in flash memory"
depends on !CHAIN_OF_TRUST
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if ARCH_CINTEGRATOR
default y if ARCH_INTEGRATOR_CP
m68k: Remove M5475x boards These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is the last of the mcf547x_8x family of boards, remove that support as well. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-15 01:34:10 +00:00
default y if M548x || M547x || M5282
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if MCF532x || MCF52x2
default y if MPC86xx || MPC83xx
ppc: Remove sbc8641d board This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-15 01:34:26 +00:00
default y if ARCH_MPC8548
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if SH && !CPU_SH4
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
Define this if you have a flash device which you want to use for the
environment.
a) The environment occupies one whole flash sector, which is
"embedded" in the text segment with the U-Boot code. This
happens usually with "bottom boot sector" or "top boot
sector" type flash chips, which have several smaller
sectors at the start or the end. For instance, such a
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
such a case you would place the environment in one of the
4 kB sectors - with U-Boot code before and after it. With
"top boot sector" type flash chips, you would put the
environment in one of the last sectors, leaving a gap
between U-Boot and the environment.
CONFIG_ENV_OFFSET:
Offset of environment data (variable area) to the
beginning of flash memory; for instance, with bottom boot
type flash chips the second sector can be used: the offset
for this sector is given here.
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-16 18:10:41 +00:00
CONFIG_ENV_OFFSET is used relative to CFG_SYS_FLASH_BASE.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
CONFIG_ENV_ADDR:
This is just another way to specify the start address of
the flash sector containing the environment (instead of
CONFIG_ENV_OFFSET).
CONFIG_ENV_SECT_SIZE:
Size of the sector containing the environment.
b) Sometimes flash chips have few, equal sized, BIG sectors.
In such a case you don't want to spend a whole sector for
the environment.
CONFIG_ENV_SIZE:
If you use this in combination with CONFIG_ENV_IS_IN_FLASH
and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
of this flash sector for the environment. This saves
memory for the RAM copy of the environment.
It may also save flash memory if you decide to use this
when your environment is "embedded" within U-Boot code,
since then the remainder of the flash sector could be used
for U-Boot code. It should be pointed out that this is
STRONGLY DISCOURAGED from a robustness point of view:
updating the environment in flash makes it always
necessary to erase the WHOLE sector. If something goes
wrong before the contents has been restored from a copy in
RAM, your target system will be dead.
CONFIG_ENV_ADDR_REDUND
These settings describe a second storage area used to hold
a redundant copy of the environment data, so that there is
a valid backup copy in case there is a power failure during
a "saveenv" operation.
BE CAREFUL! Any changes to the flash layout, and some changes to the
source code will make it necessary to adapt <board>/u-boot.lds*
accordingly!
config ENV_IS_IN_MMC
bool "Environment in an MMC device"
depends on !CHAIN_OF_TRUST
env: mmc: depends on the MMC framework The raw MMC environment directly calls into the MMC framework. Make sure it's enabled before we can select it. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-23 20:17:00 +00:00
depends on MMC
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if ARCH_EXYNOS4
default y if MX6SX || MX7D
default y if TEGRA30 || TEGRA124
default y if TEGRA_ARMV8_COMMON
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
Define this if you have an MMC device which you want to use for the
environment.
CONFIG_SYS_MMC_ENV_DEV:
Specifies which MMC device the environment is stored in.
CONFIG_SYS_MMC_ENV_PART (optional):
Specifies which MMC partition the environment is stored in. If not
set, defaults to partition 0, the user area. Common values might be
1 (first MMC boot partition), 2 (second MMC boot partition).
CONFIG_ENV_OFFSET:
CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the environment
area within the specified MMC device.
If offset is positive (the usual case), it is treated as relative to
the start of the MMC partition. If offset is negative, it is treated
as relative to the end of the MMC partition. This can be useful if
your board may be fitted with different MMC devices, which have
different sizes for the MMC partitions, and you always want the
environment placed at the very end of the partition, to leave the
maximum possible space before it, to store other data.
These two values are in units of bytes, but must be aligned to an
MMC sector boundary.
CONFIG_ENV_OFFSET_REDUND (optional):
Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
hold a redundant copy of the environment data. This provides a
valid backup copy in case the other copy is corrupted, e.g. due
to a power failure during a "saveenv" operation.
This value may also be positive or negative; this is handled in the
same way as CONFIG_ENV_OFFSET.
env: mmc: Add support for redundant env in both eMMC boot partitions Currently the MMC environment driver supports storing redundant environment only in one eMMC partition at different offsets. This is sub-optimal, since if this one boot partition is erased, both copies of environment are lost. Since the eMMC has two boot partitions, add support for storing one copy of environment in each of the two boot partitions. To enable this functionality, select CONFIG_SYS_REDUNDAND_ENVIRONMENT to indicate redundant environment should be used. Set CONFIG_SYS_MMC_ENV_PART to 1 to indicate environment should be stored in eMMC boot partition. Set CONFIG_ENV_OFFSET equal to CONFIG_ENV_OFFSET_REDUND, and both to the offset from start of eMMC boot partition where the environment should be located. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-10-17 17:23:36 +00:00
In case CONFIG_SYS_MMC_ENV_PART is 1 (i.e. environment in eMMC boot
partition) then setting CONFIG_ENV_OFFSET_REDUND to the same value
as CONFIG_ENV_OFFSET makes use of the second eMMC boot partition for
the redundant environment copy.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
This value is also in units of bytes, but must also be aligned to
an MMC sector boundary.
env: mmc: add CONFIG_ENV_MMC_USE_DT Add a new config CONFIG_ENV_MMC_USE_DT to force configuration of the U-Boot environment offset with device tree config node. This patch avoids issues when several CONFIG_ENV_IS_IN_XXX are activated, the defconfig file uses the same value for CONFIG_ENV_OFFSET or CONFIG_ENV_OFFSET_REDUND for the several ENV backends (SPI_FLASH, EEPROM NAND, SATA, MMC). After this patch a bad offset value is not possible when the selected partition in device tree is not found. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-11-10 10:49:01 +00:00
CONFIG_ENV_MMC_USE_DT (optional):
These define forces the configuration by the config node in device
tree with partition name: "u-boot,mmc-env-partition" or with
offset: "u-boot,mmc-env-offset", "u-boot,mmc-env-offset-redundant".
CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND are not used.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_IS_IN_NAND
bool "Environment in a NAND device"
depends on !CHAIN_OF_TRUST
help
Define this if you have a NAND device which you want to use for the
environment.
- CONFIG_ENV_OFFSET:
- CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the environment
area within the first NAND device. CONFIG_ENV_OFFSET must be
aligned to an erase block boundary.
- CONFIG_ENV_OFFSET_REDUND (optional):
This setting describes a second storage area of CONFIG_ENV_SIZE
size used to hold a redundant copy of the environment data, so
that there is a valid backup copy in case there is a power failure
during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
aligned to an erase block boundary.
- CONFIG_ENV_OFFSET_OOB (optional):
Enables support for dynamically retrieving the offset of the
environment from block zero's out-of-band data. The
"nand env.oob" command can be used to record this offset.
Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
using CONFIG_ENV_OFFSET_OOB.
Convert CONFIG_ENV_RANGE to Kconfig This converts the following to Kconfig: CONFIG_ENV_RANGE Now that this is in Kconfig we can enforce a minimum size and so remove the check in C code to ensure range is larger than size. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-14 02:57:33 +00:00
config ENV_RANGE
hex "Length of the region in which the environment can be written"
depends on ENV_IS_IN_NAND
range ENV_SIZE 0x7fffffff
default ENV_SIZE
help
This should be a multiple of the NAND device's block size.
Specifying a range with more erase blocks than are needed to hold
CONFIG_ENV_SIZE allows bad blocks within the range to be avoided.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_IS_IN_NVRAM
bool "Environment in a non-volatile RAM"
depends on !CHAIN_OF_TRUST
help
Define this if you have some non-volatile memory device
(NVRAM, battery buffered SRAM) which you want to use for the
environment.
- CONFIG_ENV_ADDR:
- CONFIG_ENV_SIZE:
These two #defines are used to determine the memory area you
want to use for environment. It is assumed that this memory
can just be read and written to, without any special
provision.
config ENV_IS_IN_ONENAND
bool "Environment is in OneNAND"
depends on !CHAIN_OF_TRUST
help
Define this if you want to put your local device's environment in
OneNAND.
- CONFIG_ENV_ADDR:
- CONFIG_ENV_SIZE:
These two #defines are used to determine the device range you
want to use for environment. It is assumed that this memory
can just be read and written to, without any special
provision.
config ENV_IS_IN_REMOTE
env: typo in description of ENV_IS_IN_REMOTE %s/remove/remote/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-17 22:53:11 +00:00
bool "Environment is in remote memory space"
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
depends on !CHAIN_OF_TRUST
help
Define this if you have a remote memory space which you
want to use for the local device's environment.
- CONFIG_ENV_ADDR:
- CONFIG_ENV_SIZE:
These two #defines specify the address and size of the
environment area within the remote memory space. The
local device can get the environment from remote memory
space by SRIO or PCIE links.
config ENV_IS_IN_SPI_FLASH
bool "Environment is in SPI flash"
env: Make ENV_IS_IN_SPI_FLASH depend on SPI flash being present In order for our environment to be present on SPI flash we need to depend not on the symbol for a SPI controller but rather that SPI flash of some sort is present. Update the dependencies. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-10 18:46:08 +00:00
depends on !CHAIN_OF_TRUST && (SPI_FLASH || DM_SPI_FLASH)
env: Allow to build multiple environments in Kconfig Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-23 20:17:01 +00:00
default y if ARMADA_XP
default y if INTEL_BAYTRAIL
default y if INTEL_BRASWELL
default y if INTEL_BROADWELL
default y if NORTHBRIDGE_INTEL_IVYBRIDGE
default y if INTEL_QUARK
default y if INTEL_QUEENSBAY
env: sunxi: enable ENV_IS_IN_SPI_FLASH Now that sunxi uses CONFIG_SPI more sanely, and can also now properly load the environment from SPI flash, let's enable the symbol that actually considers the SPI flash when accessing the environment. As this symbol depends on CONFIG_SPI, which we now only enable if the board has a SPI flash, we can make if "default y" for all Allwinner boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-01-11 12:46:05 +00:00
default y if ARCH_SUNXI
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
Define this if you have a SPI Flash memory device which you
want to use for the environment.
- CONFIG_ENV_OFFSET:
- CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the
environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
aligned to an erase sector boundary.
- CONFIG_ENV_SECT_SIZE:
Define the SPI flash's sector size.
- CONFIG_ENV_OFFSET_REDUND (optional):
This setting describes a second storage area of CONFIG_ENV_SIZE
size used to hold a redundant copy of the environment data, so
that there is a valid backup copy in case there is a power failure
during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
aligned to an erase sector boundary.
env: add CONFIG_ENV_SECT_SIZE_AUTO This is roughly the U-Boot side equivalent to commit e282c422e0 (tools: fw_env: use erasesize from MEMGETINFO ioctl). The motivation is the case where one has a board with several revisions, where the SPI flashes have different erase sizes. In our case, we have an 8K environment, and the flashes have erase sizes of 4K (newer boards) and 64K (older boards). Currently, we must set CONFIG_ENV_SECT_SIZE to 64K to make the code work on the older boards, but for the newer ones, that ends up wasting quite a bit of time reading/erasing/restoring the last 56K. At first, I wanted to allow setting CONFIG_ENV_SECT_SIZE to 0 to mean "use the erase size the chip reports", but that config option is used in a number of preprocessor conditionals, and shared between ENV_IS_IN_FLASH and ENV_IS_IN_SPI_FLASH. So instead, introduce a new boolean config option, which for now can only be used with ENV_IS_IN_SPI_FLASH. If left off, there's no change in behaviour. The only slightly annoying detail is that, when selected, the compiler is apparently not smart enough to see that the the saved_size and saved_offset variables are only used under the same "if (sect_size > CONFIG_ENV_SIZE)" condition as where they are computed, so we need to initialize them to 0 to avoid "may be used uninitialized" warnings. On our newer boards with the 4K erase size, saving the environment now takes 0.080 seconds instead of 0.53 seconds, which directly translates to that much faster boot time since our logic always causes the environment to be written during boot. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-14 18:51:43 +00:00
config ENV_SECT_SIZE_AUTO
bool "Use automatically detected sector size"
depends on ENV_IS_IN_SPI_FLASH
help
Some boards exist in multiple variants, with different
flashes having different sector sizes. In such cases, you
can select this option to make U-Boot use the actual sector
size when figuring out how much to erase, which can thus be
more efficient on the flashes with smaller erase size. Since
the environment must always be aligned on a sector boundary,
CONFIG_ENV_OFFSET must be aligned to the largest of the
different sector sizes, and CONFIG_ENV_SECT_SIZE should be
set to that value.
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
config ENV_SPI_BUS
int "Value of SPI flash bus for environment"
depends on ENV_IS_IN_SPI_FLASH
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
default SF_DEFAULT_BUS
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
help
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
Value the SPI bus and chip select for environment.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
config ENV_SPI_CS
int "Value of SPI flash chip select for environment"
depends on ENV_IS_IN_SPI_FLASH
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
default SF_DEFAULT_CS
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
help
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
Value of the SPI chip select for environment.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
config ENV_SPI_MAX_HZ
env: spi: Fix incorrect entry description Fix the max frequency entry description, it's incorrect. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Rini <trini@konsulko.com>
2019-05-04 17:10:05 +00:00
int "Value of SPI flash max frequency for environment"
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
depends on ENV_IS_IN_SPI_FLASH
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
default SF_DEFAULT_SPEED
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
help
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
Value of the SPI max work clock for environment.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
config ENV_SPI_MODE
hex "Value of SPI flash work mode for environment"
Convert CONFIG_ENV_SPI_BUS et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:48 +00:00
depends on ENV_IS_IN_SPI_FLASH
default SF_DEFAULT_MODE
Convert CONFIG_ENV_SPI_* to Kconfig This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:38 +00:00
help
Value of the SPI work mode for environment.
See include/spi.h for value.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
env: Access Environment in SPI flashes before relocation Enable the new Kconfig option ENV_SPI_EARLY if you want to use Environment in SPI flash before relocation. Call env_init() and than you can use env_get_f() for accessing Environment variables. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-10 08:28:05 +00:00
config ENV_SPI_EARLY
bool "Access Environment in SPI flashes before relocation"
depends on ENV_IS_IN_SPI_FLASH
help
Enable this if you want to use Environment in SPI flash
before relocation. Call env_init() and than you can use
env_get_f() for accessing Environment variables.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_IS_IN_UBI
bool "Environment in a UBI volume"
depends on !CHAIN_OF_TRUST
mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected UBI must be enabled when the environment is in UBI. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:12 +00:00
depends on MTD_UBI
depends on CMD_UBI
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
Define this if you have an UBI volume that you want to use for the
environment. This has the benefit of wear-leveling the environment
accesses, which is important on NAND.
- CONFIG_ENV_UBI_PART:
Define this to a string that is the mtd partition containing the UBI.
- CONFIG_ENV_UBI_VOLUME:
Define this to the name of the volume that you want to store the
environment in.
- CONFIG_ENV_UBI_VOLUME_REDUND:
Define this to the name of another volume to store a second copy of
the environment in. This will enable redundant environments in UBI.
It is assumed that both volumes are in the same MTD partition.
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
config SYS_REDUNDAND_ENVIRONMENT
bool "Enable redundant environment support"
help
Normally, the environemt is stored in a single location. By
selecting this option, you can then define where to hold a redundant
copy of the environment data, so that there is a valid backup copy in
case there is a power failure during a "saveenv" operation.
env: Remove all dependencies for SYS_REDUNDAND_ENVIRONMENT CONFIG_SYS_REDUNDAND_ENVIRONMENT is changing in env_internal.h how u-boot works with variables. struct environment_s has one byte flags property which also affects ENV_SIZE macro. I have reached the case where CONFIG_ENV_IS_NOWHERE is default setup but custom scripts can be designed in a way that u-boot is asked to import/export variables from/to file which can be in certain format. That's why also for this configuration make sense to enable CONFIG_SYS_REDUNDAND_ENVIRONMENT because it depends on environment file format. The patch is removing dependency on this configuration to support selecting environment file format without any specific dependency where variables are stored. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-01-13 09:25:50 +00:00
Also this config changes the binary environment structure handling
which is used by env import/export commands which are independent of
storing variables to redundant location on a non volatile device.
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_FAT_INTERFACE
string "Name of the block device for the environment"
depends on ENV_IS_IN_FAT
env: Make mmc as default option for CONFIG_ENV_FAT_INTERFACE All configs are using mmc as default fat interface. That's why make it default for everybody. The reason for this patch is to make it default for Xilinx Zynq platform which is not listed there. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-25 14:50:33 +00:00
default "mmc"
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
Define this to a string that is the name of the block device.
config ENV_FAT_DEVICE_AND_PART
string "Device and partition for where to store the environemt in FAT"
depends on ENV_IS_IN_FAT
default "0:1" if TI_COMMON_CMD_OPTIONS
xilinx: versal: Add support for saving env based on bootmode Enable saving variables to MMC(FAT) and SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal platforms as well. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23 15:07:46 +00:00
default "0:auto" if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
sunxi: Select environment MMC based on boot device Currently, the environment is always stored in eMMC if eMMC is enabled in the config. This means images written to SD and eMMC will cross- contaminate their environments unless the configuration is changed. By dropping the device number from the environment location string and implementing mmc_get_env_dev, we will always use the environment from the boot device when booting from SD/eMMC. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-19 03:16:21 +00:00
default ":auto" if ARCH_SUNXI
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
default "0" if ARCH_AT91
help
Define this to a string to specify the partition of the device. It can
be as following:
"D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
- "D:P": device D partition P. Error occurs if device D has no
partition table.
- "D:0": device D.
- "D" or "D:": device D partition 1 if device D has partition
table, or the whole device D if has no partition
table.
- "D:auto": first partition in device D with bootable flag set.
If none, first valid partition in device D. If no
partition table then means device D.
env/fat.c: allow loading from a FAT partition on the MMC boot device I don't want to have to specify the device; only the partition. This allows me to use the same image on internal eMMC or SD card for Banana Pi R2, and it finds its own environment either way. Signed-off-by: David Woodhouse <dwmw2@infradead.org> [trini: Add #if/#else/#endif logic around CONFIG_SYS_MMC_ENV_DEV usage, whitespace changes] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-19 22:07:17 +00:00
If ENV_FAT_INTERFACE is set to "mmc" then device 'D' can be omitted,
leaving the string starting with a colon, and the boot device will
be used.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_FAT_FILE
u-boot: Fix several typos 's/environemnt/environment/' and 's/Environemnt/Environment/' Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
2018-06-07 14:17:19 +00:00
string "Name of the FAT file to use for the environment"
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
depends on ENV_IS_IN_FAT
default "uboot.env"
help
It's a string of the FAT file name. This file use to store the
environment.
env/fat.c: support redund environment Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Wolfgang Denk <wd@denx.de>
2021-01-16 21:14:43 +00:00
config ENV_FAT_FILE_REDUND
string "Name of the FAT file to use for the environment"
depends on ENV_IS_IN_FAT && SYS_REDUNDAND_ENVIRONMENT
default "uboot-redund.env"
help
It's a string of the FAT file name. This file use to store the
redundant environment.
env: enable accessing the environment in an EXT4 partition For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 10:33:48 +00:00
config ENV_EXT4_INTERFACE
string "Name of the block device for the environment"
depends on ENV_IS_IN_EXT4
help
Define this to a string that is the name of the block device.
config ENV_EXT4_DEVICE_AND_PART
string "Device and partition for where to store the environemt in EXT4"
depends on ENV_IS_IN_EXT4
help
Define this to a string to specify the partition of the device. It can
be as following:
"D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
- "D:P": device D partition P. Error occurs if device D has no
partition table.
- "D:0": device D.
- "D" or "D:": device D partition 1 if device D has partition
table, or the whole device D if has no partition
table.
- "D:auto": first partition in device D with bootable flag set.
If none, first valid partition in device D. If no
partition table then means device D.
env/ext4.c: allow loading from an EXT4 partition on the MMC boot device This parallels what I added for FAT in commit 6731bef6966, allowing the environment to be found in a specific partition on the device that the board's mmc_get_env_dev() returns. On the Banana Pi R2 that means the device that U-Boot was loaded from; either the internal eMMC or an SD card. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-08-04 09:05:47 +00:00
If ENV_EXT4_INTERFACE is set to "mmc" then device 'D' can be omitted,
leaving the string starting with a colon, and the boot device will
be used.
env: enable accessing the environment in an EXT4 partition For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 10:33:48 +00:00
config ENV_EXT4_FILE
u-boot: Fix several typos 's/environemnt/environment/' and 's/Environemnt/Environment/' Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
2018-06-07 14:17:19 +00:00
string "Name of the EXT4 file to use for the environment"
env: enable accessing the environment in an EXT4 partition For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 10:33:48 +00:00
depends on ENV_IS_IN_EXT4
env: add absolute path at CONFIG_ENV_EXT4_FILE Add the absolute path to the default value of CONFIG_ENV_EXT4_FILE = "/uboot.env". This patch avoid the error : Saving Environment to EXT4... File System is consistent Please supply Absolute path Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 09:51:14 +00:00
default "/uboot.env"
env: enable accessing the environment in an EXT4 partition For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 10:33:48 +00:00
help
It's a string of the EXT4 file name. This file use to store the
environment (explicit path to the file)
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
config ENV_ADDR
hex "Environment address"
depends on ENV_IS_IN_FLASH || ENV_IS_IN_NVRAM || ENV_IS_IN_ONENAND || \
ENV_IS_IN_REMOTE || ENV_IS_IN_SPI_FLASH
default 0x0 if ENV_IS_IN_SPI_FLASH
help
Offset from the start of the device (or partition)
config ENV_ADDR_REDUND
hex "Redundant environment address"
depends on ENV_IS_IN_FLASH && SYS_REDUNDAND_ENVIRONMENT
help
Offset from the start of the device (or partition) of the redundant
environment location.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_OFFSET
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
hex "Environment offset"
depends on ENV_IS_IN_EEPROM || ENV_IS_IN_MMC || ENV_IS_IN_NAND || \
ENV_IS_IN_SPI_FLASH
env: kconfig: Restrict rockchip env for MMC Rockchip do support SPI flash as well, so there is a possibility of using flash environment for those use cases. So, restrict the current env offset, size for MMC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-21 07:54:35 +00:00
default 0x3f8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC
env: Enable SPI flash env for rockchip Most of the SPI flash devices in rockchip are 16MiB size. So, keeping U-Boot proper offset start from 128MiB with 1MiB size and then start env of 8KiB would be a compatible location between all variants of flash sizes. This patch add env start from 0x14000 with a size of 8KiB. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-21 07:54:36 +00:00
default 0x140000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH
env: sunxi: Define location in SPI flash To allow loading and storing the environment from SPI flash, adjust the raw offset variables for Allwinner boards to make sense there. U-Boot (including SPL and other blobs) is loaded from the beginning of SPI flash, so move the environment location as far back as possible, to not create unnecessary limits. As those offsets are shared with (now mostly unused) raw MMC environment, we should respect the common one megabyte limit, which also makes sense on SPI flash. So limit the environment for those raw locations to 64KB, and place it just below 1MB (@960KB). Those values are currently unused, unless someone forcibly enables the raw MMC environment. In this case it would break as of now, as the current offset of 544KB is far too low for the current (arm64) U-Boot proper. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-01-11 12:46:03 +00:00
default 0xF0000 if ARCH_SUNXI
env: Merge Rockchip, Sunxi, Zynq and ZynqMP There is no reason to have the same Kconfig options for different SoCs separately. The patch is merging them together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [trini: Fix ENV_SIZE around ENV_IS_NOWHERE] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-19 06:45:45 +00:00
default 0xE0000 if ARCH_ZYNQ
default 0x1E00000 if ARCH_ZYNQMP
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET
Kconfigs: Correct default of "0" on hex type entries It is not a parse error to have a default value of "0" for a "hex" type entry, instead of "0x0". However, "0" and "0x0" are not treated the same even by the tools themselves. Correct this by changing the default value from "0" to "0x0" for all hex type questions that had the incorrect default. Fix one instance (in two configs) of a default of "0" being used on a hex question to be "0x0". Remove the cases where a defconfig had set a value of "0x0" to be used as the default had been "0". Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-02 15:09:43 +00:00
default 0x0 if ARC
at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs Enable the extended ENV options for AT91 and OMAP2PLUS in order to be able to use CONFIG_ENV_UBI_* on these architectures. As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE, ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to KConfig. This migration was run using an extended moveconfig.py which evaluates expressions such as "(512 << 10)". See patch ("moveconfig: expand simple expressions"). All modified boards were built with SOURCE_DATE_EPOCH=0 before and after the change and successfully confirmed that the identical binary is generated (the only exception was igep00x0, which does not define CONFIG_ENV_IS_IN_UBI in the original board header. Once that is defined, the test passes too). hs: rebased patch to: 68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT" Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-05-15 13:15:54 +00:00
default 0x140000 if ARCH_AT91
default 0x260000 if ARCH_OMAP2PLUS
env: Kconfig: Adding default values for Microblaze This patch will add default values for ENV_OFFSET and ENV_SECT_SIZE for Microblaze. Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-05 10:58:20 +00:00
default 0x1080000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
env: Improve ENV_OFFSET help message When reading Kconfig help messages to understand ENV_OFFSET and ENV_OFFSET_REDUND, developers may not realise that they need to also look at the chosen ENV_IS_IN_* options to see how the offsets will be interpreted. Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-01 14:28:59 +00:00
Offset from the start of the device (or partition).
This offset may be interpreted differently depending on the chosen
ENV_IS_IN_* options. For example, for ENV_IS_IN_MMC=y, this offset may
be negative to indicate an offset backwards from the end of the
partition. See the relevant help messages for more details.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
config ENV_OFFSET_REDUND
hex "Redundant environment offset"
depends on (ENV_IS_IN_EEPROM || ENV_IS_IN_MMC || ENV_IS_IN_NAND || \
ENV_IS_IN_SPI_FLASH) && SYS_REDUNDAND_ENVIRONMENT
xilinx: Add env redund offset ENV_OFFSET_REDUND config is by default set to 0 for flashes. Saving the env variables is overwriting data at 0 offset, which is wrong. So add default redund env offset for Zynq, ZynqMP, Versal and microblaze platforms. Configured ENV_OFFSET_REDUND offsets by ENV_OFFSET + (2 * ENV_SIZE). In case of versal, we configured ENV_OFFSET_REDUND at 0x7F00000 instead of 0x7F80000. As BOOT_SCRIPT_OFFSET is already configured at 0x7F80000. Added ENV_OFFSET_REDUND in Kconfig for microblaze due to dependency of ENV_IS_IN_SPI_FLASH config. Below table specifies platform specific env and env redund offsets. PLAT ENV_OFFSET ENV_OFFSET_REDUND ---- ---------- ----------------- ZYNQ 0xE0000 0xE40000 ZYNQMP 0x1E00000 0x1E80000 VERSAL 0x7F40000 0x7F00000 MICROBLAZE 0x1080000 0x10C0000 Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/92656dc08f0f5a749d62b71ca6e77fe1be72e9e0.1661340204.git.michal.simek@amd.com
2022-08-24 11:23:26 +00:00
default 0x10C0000 if MICROBLAZE
Kconfigs: Correct default of "0" on hex type entries It is not a parse error to have a default value of "0" for a "hex" type entry, instead of "0x0". However, "0" and "0x0" are not treated the same even by the tools themselves. Correct this by changing the default value from "0" to "0x0" for all hex type questions that had the incorrect default. Fix one instance (in two configs) of a default of "0" being used on a hex question to be "0x0". Remove the cases where a defconfig had set a value of "0x0" to be used as the default had been "0". Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-02 15:09:43 +00:00
default 0x0
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
help
Offset from the start of the device (or partition) of the redundant
environment location.
env: Improve ENV_OFFSET help message When reading Kconfig help messages to understand ENV_OFFSET and ENV_OFFSET_REDUND, developers may not realise that they need to also look at the chosen ENV_IS_IN_* options to see how the offsets will be interpreted. Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-01 14:28:59 +00:00
This offset may be interpreted differently depending on the chosen
ENV_IS_IN_* options. For example, for ENV_IS_IN_MMC=y, this offset may
be negative to indicate an offset backwards from the end of the
partition. See the relevant help messages for more details.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_SIZE
hex "Environment Size"
env: Merge Rockchip, Sunxi, Zynq and ZynqMP There is no reason to have the same Kconfig options for different SoCs separately. The patch is merging them together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [trini: Fix ENV_SIZE around ENV_IS_NOWHERE] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-19 06:45:45 +00:00
default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
env: sunxi: Define location in SPI flash To allow loading and storing the environment from SPI flash, adjust the raw offset variables for Allwinner boards to make sense there. U-Boot (including SPL and other blobs) is loaded from the beginning of SPI flash, so move the environment location as far back as possible, to not create unnecessary limits. As those offsets are shared with (now mostly unused) raw MMC environment, we should respect the common one megabyte limit, which also makes sense on SPI flash. So limit the environment for those raw locations to 64KB, and place it just below 1MB (@960KB). Those values are currently unused, unless someone forcibly enables the raw MMC environment. In this case it would break as of now, as the current offset of 544KB is far too low for the current (arm64) U-Boot proper. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-01-11 12:46:03 +00:00
default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91
default 0x10000 if ARCH_SUNXI
env: kconfig: Restrict rockchip env for MMC Rockchip do support SPI flash as well, so there is a possibility of using flash environment for those use cases. So, restrict the current env offset, size for MMC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-21 07:54:35 +00:00
default 0x8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC
env: Enable SPI flash env for rockchip Most of the SPI flash devices in rockchip are 16MiB size. So, keeping U-Boot proper offset start from 128MiB with 1MiB size and then start env of 8KiB would be a compatible location between all variants of flash sizes. This patch add env start from 0x14000 with a size of 8KiB. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-21 07:54:36 +00:00
default 0x2000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
default 0x8000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET
ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig Join the party of some ARM boards and drop more items from include/configs/xxx.h. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 08:42:48 +00:00
default 0x4000 if ARC
at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs Enable the extended ENV options for AT91 and OMAP2PLUS in order to be able to use CONFIG_ENV_UBI_* on these architectures. As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE, ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to KConfig. This migration was run using an extended moveconfig.py which evaluates expressions such as "(512 << 10)". See patch ("moveconfig: expand simple expressions"). All modified boards were built with SOURCE_DATE_EPOCH=0 before and after the change and successfully confirmed that the identical binary is generated (the only exception was igep00x0, which does not define CONFIG_ENV_IS_IN_UBI in the original board header. Once that is defined, the test passes too). hs: rebased patch to: 68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT" Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-05-15 13:15:54 +00:00
default 0x1f000
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
help
Size of the environment storage area
env: Merge Rockchip, Sunxi, Zynq and ZynqMP There is no reason to have the same Kconfig options for different SoCs separately. The patch is merging them together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [trini: Fix ENV_SIZE around ENV_IS_NOWHERE] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-19 06:45:45 +00:00
config ENV_SECT_SIZE
hex "Environment Sector-Size"
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
depends on ENV_IS_IN_FLASH || ENV_IS_IN_SPI_FLASH
env: Enable SPI flash env for rockchip Most of the SPI flash devices in rockchip are 16MiB size. So, keeping U-Boot proper offset start from 128MiB with 1MiB size and then start env of 8KiB would be a compatible location between all variants of flash sizes. This patch add env start from 0x14000 with a size of 8KiB. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-21 07:54:36 +00:00
default 0x2000 if ARCH_ROCKCHIP
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET
at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs Enable the extended ENV options for AT91 and OMAP2PLUS in order to be able to use CONFIG_ENV_UBI_* on these architectures. As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE, ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to KConfig. This migration was run using an extended moveconfig.py which evaluates expressions such as "(512 << 10)". See patch ("moveconfig: expand simple expressions"). All modified boards were built with SOURCE_DATE_EPOCH=0 before and after the change and successfully confirmed that the identical binary is generated (the only exception was igep00x0, which does not define CONFIG_ENV_IS_IN_UBI in the original board header. Once that is defined, the test passes too). hs: rebased patch to: 68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT" Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-05-15 13:15:54 +00:00
default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91
env: Kconfig: Adding default values for Microblaze This patch will add default values for ENV_OFFSET and ENV_SECT_SIZE for Microblaze. Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-05 10:58:20 +00:00
default 0x20000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH
env: sunxi: Define location in SPI flash To allow loading and storing the environment from SPI flash, adjust the raw offset variables for Allwinner boards to make sense there. U-Boot (including SPL and other blobs) is loaded from the beginning of SPI flash, so move the environment location as far back as possible, to not create unnecessary limits. As those offsets are shared with (now mostly unused) raw MMC environment, we should respect the common one megabyte limit, which also makes sense on SPI flash. So limit the environment for those raw locations to 64KB, and place it just below 1MB (@960KB). Those values are currently unused, unless someone forcibly enables the raw MMC environment. In this case it would break as of now, as the current offset of 544KB is far too low for the current (arm64) U-Boot proper. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-01-11 12:46:03 +00:00
default 0x10000 if ARCH_SUNXI && ENV_IS_IN_SPI_FLASH
env: Merge Rockchip, Sunxi, Zynq and ZynqMP There is no reason to have the same Kconfig options for different SoCs separately. The patch is merging them together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [trini: Fix ENV_SIZE around ENV_IS_NOWHERE] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-19 06:45:45 +00:00
help
Size of the sector containing the environment.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
config ENV_UBI_PART
string "UBI partition name"
depends on ENV_IS_IN_UBI
help
MTD partition containing the UBI device
config ENV_UBI_VOLUME
string "UBI volume name"
depends on ENV_IS_IN_UBI
help
Name of the volume that you want to store the environment in.
env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining the name of the UBI volume used to store the redundant environment. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> hs: get rid of stm32mp1* build errors
2019-05-15 13:15:53 +00:00
config ENV_UBI_VOLUME_REDUND
string "UBI redundant volume name"
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
depends on ENV_IS_IN_UBI && SYS_REDUNDAND_ENVIRONMENT
env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining the name of the UBI volume used to store the redundant environment. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> hs: get rid of stm32mp1* build errors
2019-05-15 13:15:53 +00:00
help
Name of the redundant volume that you want to store the environment in.
env: ubi: support configurable VID offset Introduce KConfig CONFIG_ENV_UBI_VID_OFFSET to allow providing custom VID header offsets for the environment on UBI. Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com> Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-05-15 13:15:55 +00:00
config ENV_UBI_VID_OFFSET
int "ubi environment VID offset"
depends on ENV_IS_IN_UBI
default 0
help
UBI VID offset for environment. If 0, no custom VID offset is used.
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
config SYS_RELOC_GD_ENV_ADDR
env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR Update the comment for SYS_RELOC_GD_ENV_ADDR as gd->env_addr is updated in board_r.c::initr_reloc_global_data() under the compilation flags CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-10 17:28:42 +00:00
bool "Relocate gd->env_addr"
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
help
Relocate the early env_addr pointer so we know it is not inside
the binary. Some systems need this and for the rest, it doesn't hurt.
Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 21:14:47 +00:00
config SYS_MMC_ENV_DEV
int "mmc device number"
fsl-layerscape: drop obsolete PPA secure firmware support PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. Drop support for it. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-08-23 13:25:46 +00:00
depends on ENV_IS_IN_MMC || ENV_IS_IN_FAT || \
env: Kconfig: Add default option for PHY_CORTINA Add PHY_CORTINA as default option in SYS_MMC_ENV_DEV Kconfig entry as PHY_CORTINA require SYS_MMC_ENV_DEV value similar to FMAN_ENET or QE. This helps in resolving compilation failure. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-10 05:50:06 +00:00
CMD_MVEBU_BUBT || FMAN_ENET || QE || PHY_CORTINA
Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 21:14:47 +00:00
default 0
help
MMC device number on the platform where the environment is stored.
config SYS_MMC_ENV_PART
int "mmc partition number"
depends on ENV_IS_IN_MMC || ENV_IS_IN_FAT
default 0
help
MMC hardware partition device number on the platform where the
environment is stored. Note that this is not related to any software
defined partition table but instead if we are in the user area, which is
partition 0 or the first boot partition, which is 1 or some other defined
partition.
env: mmc: statically set the environment partition name The new opt-out setting, CONFIG_ENV_MMC_PARTITION, statically sets the MMC environment partition name. Prior to this patch, the only way to declare this partition name was by creating a 'u-boot,mmc-env-partition' parameter in the device-tree's /config node. This setting provides additional flexibility, particularly in cases where accessing the device-tree is not straightforward (e.g. QEMU). If undeclared, the device-tree's setting will be used. Signed-off-by: Emmanuel Di Fede <emmanuel.difede@cysec.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-14 10:05:28 +00:00
config USE_ENV_MMC_PARTITION
bool "use the mmc environment partition name"
depends on ENV_IS_IN_MMC
config ENV_MMC_PARTITION
string "mmc environment partition name"
depends on USE_ENV_MMC_PARTITION
help
MMC partition name used to save environment variables.
If this variable is unset, u-boot will try to get the env partition name
from the device-tree's /config node.
env: mmc: add CONFIG_ENV_MMC_USE_DT Add a new config CONFIG_ENV_MMC_USE_DT to force configuration of the U-Boot environment offset with device tree config node. This patch avoids issues when several CONFIG_ENV_IS_IN_XXX are activated, the defconfig file uses the same value for CONFIG_ENV_OFFSET or CONFIG_ENV_OFFSET_REDUND for the several ENV backends (SPI_FLASH, EEPROM NAND, SATA, MMC). After this patch a bad offset value is not possible when the selected partition in device tree is not found. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-11-10 10:49:01 +00:00
config ENV_MMC_USE_DT
bool "Read partition name and offset in DT"
depends on ENV_IS_IN_MMC && OF_CONTROL
help
Only use the device tree to get the environment location in MMC
device, with partition name or with offset.
The 2 defines CONFIG_ENV_OFFSET, CONFIG_ENV_OFFSET_REDUND
are not used as fallback.
Allow providing default environment from file Modifying the default environment via CONFIG_EXTRA_ENV_SETTINGS is somewhat inflexible, partly because the cpp language does not allow appending to an existing macro. This prevents reuse of "environment fragments" for different boards, which in turn makes maintaining that environment consistently tedious and error-prone. This implements a Kconfig option for allowing one to define the entire default environment in an external file, which can then, for example, be generated programmatically as part of a Yocto recipe, or simply be kept in version control separately from the U-boot repository. Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-20 10:38:45 +00:00
config USE_DEFAULT_ENV_FILE
bool "Create default environment from file"
help
Normally, the default environment is automatically generated
based on the settings of various CONFIG_* options, as well
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-04 15:03:50 +00:00
as the CFG_EXTRA_ENV_SETTINGS. By selecting this option,
Allow providing default environment from file Modifying the default environment via CONFIG_EXTRA_ENV_SETTINGS is somewhat inflexible, partly because the cpp language does not allow appending to an existing macro. This prevents reuse of "environment fragments" for different boards, which in turn makes maintaining that environment consistently tedious and error-prone. This implements a Kconfig option for allowing one to define the entire default environment in an external file, which can then, for example, be generated programmatically as part of a Yocto recipe, or simply be kept in version control separately from the U-boot repository. Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-20 10:38:45 +00:00
you can instead define the entire default environment in an
external file.
config DEFAULT_ENV_FILE
string "Path to default environment file"
depends on USE_DEFAULT_ENV_FILE
help
The path containing the default environment. The format is
the same as accepted by the mkenvimage tool: lines
containing key=value pairs, blank lines and lines beginning
with # are ignored.
Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-01 16:37:53 +00:00
config ENV_VARS_UBOOT_RUNTIME_CONFIG
bool "Add run-time information to the environment"
help
Enable this in order to add variables describing certain
run-time determined information about the hardware to the
environment. These will be named board_name, board_rev.
env: Convert CONFIG_DELAY_ENVIRONMENT to Kconfig This converts ad-hoc CONFIG_DELAY_ENVIRONMENT to Kconfig. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-06 17:38:42 +00:00
config DELAY_ENVIRONMENT
bool "Delay environment loading"
depends on !OF_CONTROL
help
Enable this to inhibit loading the environment during board
initialization. This can address the security risk of untrusted data
being used during boot. Normally the environment is loaded when the
board is initialised so that it is available to U-Boot. This inhibits
that so that the environment is not available until explicitly loaded
later by U-Boot code. With CONFIG_OF_CONTROL this is instead
controlled by the value of /config/load-environment.
env: allow environment to be amended from control dtb It can be useful to use the same U-Boot binary for multiple purposes, say the normal one, one for developers that allow breaking into the U-Boot shell, and one for use during bootstrapping which runs a special-purpose bootcmd. Or one can have several board variants that can share almost all boot logic, but just needs a few tweaks in the variables used by the boot script. To that end, allow the control dtb to contain a /config/enviroment node (or whatever one puts in fdt_env_path variable), whose property/value pairs are used to update the run-time environment after it has been loaded from its persistent location. The indirection via fdt_env_path is for maximum flexibility - for example, should the user wish (or board logic dictate) that the values in the DTB should no longer be applied, one simply needs to delete the fdt_env_path variable; that can even be done automatically by including a fdt_env_path = ""; property in the DTB node. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2021-04-21 09:06:54 +00:00
config ENV_IMPORT_FDT
bool "Amend environment by FDT properties"
depends on OF_CONTROL
help
If selected, after the environment has been loaded from its
persistent location, the "env_fdt_path" variable is looked
up and used as a path to a node in the control DTB. The
property/value pairs in that node is then used to update the
run-time environment. This can be useful to use the same
U-Boot binary with different board variants.
config ENV_FDT_PATH
string "Default value for env_fdt_path variable"
depends on ENV_IMPORT_FDT
default "/config/environment"
help
The initial value of the env_fdt_path variable.
env: Add option to only ever append environment Add configuration option which prevents the environment hash table to be ever cleared and reloaded with different content. This is useful in case the first environment loaded into the hash table contains e.g. sensitive content which must not be dropped or reloaded. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-07 18:51:38 +00:00
config ENV_APPEND
bool "Always append the environment with new data"
help
If defined, the environment hash table is only ever appended with new
data, but the existing hash table can never be dropped and reloaded
with newly imported data. This may be used in combination with static
flags to e.g. to protect variables which must not be modified.
env: Add support for explicit write access list This option marks any U-Boot variable which does not have explicit 'w' writeable flag set as read-only. This way the environment can be locked down and only variables explicitly configured to be writeable can ever be changed by either 'env import', 'env set' or loading user environment from environment storage. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-07 18:51:39 +00:00
config ENV_WRITEABLE_LIST
bool "Permit write access only to listed variables"
env: Complete generic support for writable list This completes what 890feecaab72 started by selecting ENV_APPEND and loading the default env before any other sources. This ensures that load operations pick up all non-writable vars from the default env and only permitted parts from other locations according to the regular priorities. With this change, boards only need to define the list of writable variables but no longer have to provide a custom env_get_location implementation. CC: Joe Hershberger <joe.hershberger@ni.com> CC: Marek Vasut <marex@denx.de> CC: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-02-03 12:22:51 +00:00
select ENV_APPEND
env: Add support for explicit write access list This option marks any U-Boot variable which does not have explicit 'w' writeable flag set as read-only. This way the environment can be locked down and only variables explicitly configured to be writeable can ever be changed by either 'env import', 'env set' or loading user environment from environment storage. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-07 18:51:39 +00:00
help
If defined, only environment variables which explicitly set the 'w'
writeable flag can be written and modified at runtime. No variables
can be otherwise created, written or imported into the environment.
env: Convert ENV_ACCESS_IGNORE_FORCE to Kconfig Convert ENV_ACCESS_IGNORE_FORCE to Kconfig, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-05-21 23:10:14 +00:00
config ENV_ACCESS_IGNORE_FORCE
bool "Block forced environment operations"
help
If defined, don't allow the -f switch to env set override variable
access flags.
env: Simplify Makefile using $(SPL_TPL_) Add Kconfig options SPL_ENV_* and TPL_ENV_* and simplify Makefile. This allows SPL/TPL image has different environment setting from full feature U-Boot. Signed-off-by: York Sun <york.sun@nxp.com>
2018-06-26 17:03:22 +00:00
if SPL_ENV_SUPPORT
config SPL_ENV_IS_NOWHERE
bool "SPL Environment is not stored"
default y if ENV_IS_NOWHERE
help
Similar to ENV_IS_NOWHERE, used for SPL environment.
config SPL_ENV_IS_IN_MMC
bool "SPL Environment in an MMC device"
depends on !SPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_MMC
default y
help
Similar to ENV_IS_IN_MMC, used for SPL environment.
config SPL_ENV_IS_IN_FAT
bool "SPL Environment is in a FAT filesystem"
depends on !SPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_FAT
default y
help
Similar to ENV_IS_IN_FAT, used for SPL environment.
config SPL_ENV_IS_IN_EXT4
bool "SPL Environment is in a EXT4 filesystem"
depends on !SPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_EXT4
default y
help
Similar to ENV_IS_IN_EXT4, used for SPL environment.
config SPL_ENV_IS_IN_NAND
bool "SPL Environment in a NAND device"
depends on !SPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_NAND
default y
help
Similar to ENV_IS_IN_NAND, used for SPL environment.
config SPL_ENV_IS_IN_SPI_FLASH
bool "SPL Environment is in SPI flash"
depends on !SPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_SPI_FLASH
default y
help
Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment.
config SPL_ENV_IS_IN_FLASH
bool "SPL Environment in flash memory"
depends on !SPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_FLASH
default y
help
Similar to ENV_IS_IN_FLASH, used for SPL environment.
endif
if TPL_ENV_SUPPORT
config TPL_ENV_IS_NOWHERE
bool "TPL Environment is not stored"
default y if ENV_IS_NOWHERE
help
Similar to ENV_IS_NOWHERE, used for TPL environment.
config TPL_ENV_IS_IN_MMC
bool "TPL Environment in an MMC device"
depends on !TPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_MMC
default y
help
Similar to ENV_IS_IN_MMC, used for TPL environment.
config TPL_ENV_IS_IN_FAT
bool "TPL Environment is in a FAT filesystem"
depends on !TPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_FAT
default y
help
Similar to ENV_IS_IN_FAT, used for TPL environment.
config TPL_ENV_IS_IN_EXT4
bool "TPL Environment is in a EXT4 filesystem"
depends on !TPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_EXT4
default y
help
Similar to ENV_IS_IN_EXT4, used for TPL environment.
config TPL_ENV_IS_IN_NAND
bool "TPL Environment in a NAND device"
depends on !TPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_NAND
default y
help
Similar to ENV_IS_IN_NAND, used for TPL environment.
config TPL_ENV_IS_IN_SPI_FLASH
bool "TPL Environment is in SPI flash"
depends on !TPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_SPI_FLASH
default y
help
Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment.
config TPL_ENV_IS_IN_FLASH
bool "TPL Environment in flash memory"
depends on !TPL_ENV_IS_NOWHERE
depends on ENV_IS_IN_FLASH
default y
help
Similar to ENV_IS_IN_FLASH, used for TPL environment.
endif
env: Allow VPL environment to be nowhere Add an option to put the VPL environment nowhere (not in storage). Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-22 16:34:00 +00:00
if VPL_ENV_SUPPORT
config VPL_ENV_IS_NOWHERE
bool "VPL Environment is not stored"
default y if ENV_IS_NOWHERE
help
Similar to ENV_IS_NOWHERE, used for VPL environment.
endif # VPL_ENV_SUPPORT
Convert CONFIG_BOOTFILE to Kconfig This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:48 +00:00
config USE_BOOTFILE
bool "Add a 'bootfile' environment variable"
help
The "bootfile" variable is used in some cases to allow for
controlling what file U-Boot will attempt to load and boot. To set
this, enable this option and set the value in the next question.
config BOOTFILE
string "'bootfile' environment variable value"
depends on USE_BOOTFILE
help
The value to set the "bootfile" variable to.
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:07 +00:00
config USE_ETHPRIME
bool "Add an 'ethprime' environment variable"
help
The "ethprime" variable is used in some cases to control which
network interface is used first.
config ETHPRIME
string "'ethprime' environment variable value"
depends on USE_ETHPRIME
help
The value to set the "ethprime" variable to.
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-02 21:42:27 +00:00
config USE_HOSTNAME
bool "Set a default 'hostname' value in the environment"
default y if X86
config HOSTNAME
string "Value of the default 'hostname' value in the environment"
depends on USE_HOSTNAME
default "x86" if X86
default "unknown"
Kconfig: Move VERSION_VARIABLE under environment This relates to the environment so should not be at the top level. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-11 02:21:24 +00:00
config VERSION_VARIABLE
bool "Add a 'ver' environment variable with the U-Boot version"
help
If this variable is defined, an environment variable
named "ver" is created by U-Boot showing the U-Boot
version as printed by the "version" command.
Any change to this variable will be reverted at the
next reset.
Move environment files from common/ to env/ About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-03 18:21:49 +00:00
endmenu
Reference in a new issue Copy permalink